Welcome Customer !

Membership

XwbooInstrumentationLevel InstrumentCapacitance Level MeterRF cable capacitance type level meter
  • $item.Title
  • $item.Title

RF cable capacitance type level meter

iangsu Zhongwei Measurement and Control Co., Ltd.

Model
Nature of the Manufacturer
Other
Product Category
Capacitance Level Meter
Place of Origin
,
RF cable capacitance type level meter
Description:

Productoverview:

ZW-LT701 series The change of various physical parameters is converted to a standard current signal sent to the operation of the control room, for two meter or computer centralized display, alarm or automatic control. The good structure and installation, can be applied to high temperature and high pressure, strong corrosion, easy crystallization, anti blocking, anti cold junction level and solid powdery and granular materials under special conditions, a continuous detection of material or material, can be widely applied to testing various industrial process control.

Two, work principle:

ZW-LT701 series capacitor RF cable type levelmeter electric induction principle, the measured medium immersion probe height changes, reflecting the induction frequency changes, the circuit and the corresponding 4~20mA current signal output. That is generated by the CPC calibration signal and the measured signal value from the medium value and the difference operation is converted to the actual level. When the transmitter is put into a position in the liquid, the pressure sensors: P = 9.80665, P H

The P effect of the liquid pressure on the sensor unit, kPa

P a liquid density, g / cm3

H to measure the height of liquid level, M

So H = 0.10197P / P

To feel the pressure transmitter signal is converted into an electrical signal, and the signal is proportional to the height of liquid.

Three, application:

ZW-LT701 Series RF cable capacitance type level meter suitable for high temperature and high pressure, strong corrosion, easy to crystallize, easy to plug the harsh conditions of continuous detection of various liquids. The water level measurement for sewage, pH value, and the boiler, the machine without any movable or elastic components, impact resistance, convenient installation, high reliability, high precision. Float, can replace the traditional input type, differential pressure type liquid level transmitter used in various occasions.

Four, main features:

1, simple structure, without any movable or elastic element, so stay on very little maintenance.

2, convenient installation: the built-in structure especially show this characteristic, without any special tools.

3, easy to adjust the zero range, two potentiometers can be arbitrary zero migration or range in level detection range change, two adjustments do not affect each other.

4, a wide range of uses: liquid level measurement is suitable for high temperature and high pressure and corrosive medium.

Five, technical parameters:

1, the effective detection range: 0-0.2-20m;

2, accuracy: 0.5 grade and 1 grade, 1.5 grade;

3, pressure range: negative pressure and high pressure below 32MPa;

4, working temperature: -50 to 240 DEG c;

5, the ambient temperature to 75 DEG C: -20;

6, suitable medium: any medium of acid and alkali, salt or no corrosion of ptfe;

7, the output signal 4-20mA, two-wire system;

8, the power supply load resistance of 0-750 ohm DC24V;

9, fixed mode: screw mounted M20 * 1.5 and M27 * 2 DN15, DN25, DN50 flange, DN80;

10, the scene display: analog display 0-99%, digital display, depth of field.

Six, measurement system:

The measurement system is intrinsically safe.

This type of pressure, differential pressure transmitter with intrinsically safe circuit, suitable for explosive hazardous area explosion-proof grade ExiallCT4-CT6.

In system loop shielded signal cable must be used, and reliable grounding. The measurement system wiring diagram only to the output signal of 4-20mA and 0-10mA as an example,

The liquid level transmitter has the advantages of reliable operation, stable performance, small size, light weight, low cost, design a variety of forms, convenient installation, no need to support. Electronic circuit board with microprocessor based, can automatically eliminate the influence of temperature change on the sensor accuracy.

This series of products can be equipped with liquid crystal display LCD for local operation.

Intelligent output at the same time with HART communication function.

Seven, installation and debugging:

Cable type and lever type liquid level transmitter with a plurality of installation, in order to adapt to different site conditions. When the site does not provide M20 * 1.5 internal thread or flange processing facilities, can choose the wall mounted, horizontal tube type and vertical tube type three installation options, make your handy in the on-site installation.

In the measurement of dielectric greater mobility, in order to prevent the sensor sharp swings the user can choose to play a stable weight attachment, the role of the sensor with weight must be to the weight of objects into the bottom of the container, so as not to pull the bad conductor.

In the field of environment is bad, the user should choose the sensor protection cover to protect the sensor, the measurement accuracy of the foreign body to avoid being damaged or infected.

The use of ZW-LT702 type liquid level transmitter, if not the metal containers, you need to put a wire connecting the bottom of the container with the transducer shell, otherwise the measurement is not accurate.

This product has been calibrated at the factory, if you need to adjust the site can take the following methods:

A: the debugging method of intelligent circuit:

The zero - position when the liquid level is low, and press the key of "Z" and "S" button for 8 seconds at the same time. Then, click "Z" button, the output current is automatically adjusted to 4mA.

Full - field adjusting when the liquid level is high, at the same time, press the "Z" button and the "S" button for 8 seconds at the same time. Then, click "S" button, the output current is automatically adjusted to 20mA.

B: the debugging method of analog circuit:

When the liquid level in the lower limit, the screwdriver is rotated slowly "Z" potentiometer, observe the meter readings close to 4mA.

When the liquid level in the cap with a screwdriver, slowly rotating "S" potentiometer, observe the meter readings close to 20mA.

So repeated 2-3 times or more, until the zero and span are respectively 4mA and 20mA accurately.

After adjustment, we should tighten the lid.

Eight, installation and notice:

Appearance and installation:

The liquid level transmitter is composed of a casing, an amplifier, terminals, protective cap, hollow wire etc., according to the needs of the user can use the pointer table, liquid crystal display meter.

Installation method:

1, choose the place easy to operate and maintain the installation;

2, should be kept away from the vibration source installation;

3, should be kept away from heat sources;

4, input mounted liquid level transmitter, the metal probe to sink into the bottom of the container.

9, note:

1, all products are supplied with product certificate and instructions including product number, technical parameters, wiring diagrams, etc. Please carefully check the date so wrong.

2, the installation should be according to the product connection and thread type, check whether the scene interface and product interface. If the thread interface should slow attention not to tighten, seal, torque is applied directly to the transmitter housing, only in the hexagonal transmitter interface.

3, the wiring should be in strict accordance with the requirements that the company use wiring.

4, this product can change the instrument precision, prohibit disassemble, collision and drop, forced to fight rejection.

5, the transmitter power can work, but 30 minutes warm-up stable output.

6, if abnormal, should turn off the power, stop using, check, or directly to the technical department of our company.

7, transportation and storage should restore the original packaging and store in a cool, dry and ventilated warehouse.

8, installation and use should pay attention not to induced wire break.

9, when installing the induction wire to the pool wall at least distance of more than 10CM, otherwise the measurement is not accurate.

The grounding wire 10, PTFE rod structure and the liquid level and the measured medium must be conducted, otherwise the measurement is not accurate.

11, the installation site should adopt effective lightning protection measures.

12, this series of any liquid level transmitter shell must be reliable grounding, grounding resistance should be less than 4.

13, safety gate should be made explosion-proof certification, the installation should be carried out according to the requirements of the specification.

14, when the transmitter for "0" when the security gate to the power transformer shall meet the requirements of Article 8.1 of the GB3836.4-2000.

Ten, The selection of encoding:

Type spectrum

Explain

ZW-LT70


Capacitance level meter (Zhongwei control)

category

One


Cable type

Two


Rod type (sensor is installed at the bottom, direct contact with liquid medium)

Three


Antiseptic

Four


The guide rod (pressure sensor mounted on the upper part, is not in direct contact with the media)

Process connection form

T


Mounting bracket

N


Flange mounting DN40 PN1.0

K


Tri-Clamp

Y


Special agreement

Connect the sensor material

One


Three hundred and four

Bar type

Two


Three hundred and sixteen

Three


316L

Four


Ding Qing rubber and PVC Composites

Cable type

Five


PTFE (polypropylene flange)

Proof way

O


No explosion

E


Explosion-proof Exia II CT6

Display mode

O


Without on-site instructions

Z


With current meter indication ( 0-99% Scale)

X


With on-site display

The weight of

O


Without counterweight

W


Need to balance


-.


The installation height ( Mm )


-.


Measurement of height ( Mm )


-.

The measured medium density ( G/cm3 )

Eleven, design selection and ordering information:

1, specifications: ZW-LT700 series capacitance level meter;

2, the measured medium Name: medium density;

3, measurement range: also known as nominal length;

4, working pressure: pressure;

5, working temperature: measure the temperature of the liquid;

6, material requirements: wetted materials;

7, supporting the supply of flanges, bolts and nuts, valve, sealing washers and other accessories;

8, standard: flange flange nominal diameter, DN20, DN25, DN50, DN80, DN100 etc.;

9, special requirements: please indicate in detail before ordering.

Nine, customer service service commitment:

1, our level transmitter series product quality problems within twelve months, responsible for free maintenance.

2, the warranty period if the products of our company have any quality problems, our company is responsible for free repair or replacement.

3, the warranty period if the user use undeserved, cause damage to the product, our company is responsible for the maintenance, collect the damaged parts cost.

4, after the warranty period of product quality problems, our company is responsible for the maintenance, collect the damaged parts cost.

5, if the user needs to our service, our company in the province of the user service personnel arrived at the scene within 12 hours, arrived at the scene 48 hours outside users.



iangsu Zhongwei Measurement and Control Co., Ltd. is located in Huaian City, the hometown of Premier Zhou, a great man of one generation. It has beautiful scenery, pleasant climate and abundant products. Main Products: Main Products: Intelligent Vortex Street Flowmeter, Intelligent Electromagnetic Flowmeter, Liquid Turbine Flowmeter, Elliptical Gear Flowmeter, Universal Electronic Flowmeter, Magnetoelectricity Flowmeter, Swirl Flowmeter, Metal Tube Float Meter, Wilba Flowmeter, Delta Bar Flowmeter, Orifice Flowmeter, Balanced Flowmeter, Air Measuring Device, Heat Meter, Ultrasound Flow Meter Meters, magneto-sensitive electronic double-color liquid level gauge, boiler drum level gauge, mica double-color water level gauge, radar level gauge, ultrasonic level gauge, magnetic turning plate level gauge, level (level) switch, pressure differential pressure transmitter, thermometer, thermoresistor, thermocouple, display, recorder, calibration equipment, wire and cable, control valve, etc. Professional R&D and sales of industrial automation products, providing integrated technical services of industrial automation system, is a comprehensive industrial automation product R&D and technology enterprise in China, which is built and developed at the beginning of the industry scale.The company's quality assurance system is complete. The company has a number of high-tech professionals engaged in the design, development, installation and commissioning of automation control research for a long time, which provides a satisfactory set of systems for various industries. It gathers strong professional team, accumulates abundant technology and management experience, covers the national marketing network and branches, and can provide users with technical services quickly and conveniently. In the era of Internet commerce, the company has set up the E-Commerce Department, relying on professional network technology and e-commerce trade means, to implement the integration of traditional economy and resources as well as rapid market expansion in a wide range. Since its establishment, the company has established a long-term and stable business and trade partnership with manufacturers in various regions by virtue of its good reputation and high-quality service.In line with the business philosophy of "satisfying customer's needs and creating value for customers", we have provided a large number of complete sets of services for users in oil field, power, chemical industry, metallurgy, paper-making, cement and other industries for many years to improve more seamless services for our customers. You can purchase online, learn business knowledge independently, serve your customers better, and create more value for you for five consecutive years. Our products are sold overseas, and we have distribution agents in many regions to further increase domestic marketing and expand the brand of Zhongwei. From 2011, we will recruit agents and distribute in the whole country. We can also provide OEM services for you. The quality service is consistent with that of Jiangsu Zhongwei. We promise you the best quality, the best service and the best price!The company adheres to the development policy of "science and technology, innovation, quality and service", continues to adhere to the purpose of "building an industrial aircraft carrier and contributing to the national economy". In the future development, it will continue to devote itself to brand building and constantly cultivate new economic growth points. Jiangsu Zhongwei will actively participate in market competition with high-quality products, preferential prices and excellent services, and wholeheartedly participate in friends from all walks of life. Friends, old and new customers cooperate in good faith, work hand in hand with Zhongwei measurement and control, create a better tomorrow.
Similar Product Recommend