Welcome Customer !

Membership

XwbooGarment MachineryWashing MachineryIndustrial DryerRich Milk Powder Spray Dryer
  • $item.Title
  • $item.Title

Rich Milk Powder Spray Dryer

Changzhou Xinggan Drying Equipment Co., LTD.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Industrial Dryer
Place of Origin
JiangSu, ChangZhou
Rich Milk Powder Spray Dryer

Description

(Rich Milk Powder) Spray Dryer is the most widely used process in liquid shaping technology. It is suitable for producing powder and granules solid products from solution, emulsion, soliquoid, and pumpable paste materials. Therefore, when the particle size, final moisture, bulk density and granules shape meet the accurate standard, centrifugal spray drying is a ideal drying process.



Working Principle

Liquid material is atomized through a special pressure nozzle with a high-pressure pump. Hot air enters the dryer after being adjusted by an air distributor. The material and hot air is mixed in the dryer, rapidly carries on heat and mass transfer. Powder or granular products are produced in a very short time. Products with larger particles size are discharged from the bottom of the dryer, smaller particles enter the cyclone with hot air. The exhaust gas is discharged into the air after dust removal in a scrubber. The dryers can be divided into high, middle and low-pressure spray dryers according to different pressures of atomization, while taking into account different flow fields, they are divided into co-current, fountain mode and counter-current spray dryers.


Characteristics:

1. High operational flexibility on non-adhesive or low-adhesive liquid materials.

2. Simple structure of the spray nozzle, easily used and maintained.

3. Less power consumption, low cost.

4. The hollow spherical product with big particles, good mobility and solubility.

5. Can be used to spray-cooling granulation process, such as paraffin, grease particles, special resins, etc.


Applicable Materials

rich-protein-skimmed-milk-powder-952


Rich Milk Powder

Food: Amino acid, vitamin, egg powder, bone powder, protein, milk powder, blood powder, soy sauce powder, coffee, tea powder, glucose, pentadiene carboxylic acid, pectin, flavours, vegetable juice, yeast, starch, etc.


Ceramic: Alumina, zirconia, magnesium oxide, Titania, pottery clay, china clay, all kinds of magnetic porcelain and metal-oxides, etc.


Chemical: Aluminum polychloride, disperse dyes, reactive dyes, organic catalyzer, white carbon black, washing powder, zinc sulfate, silica, sodium metasilicate, potassium fluoride, calcium carbonate, potassium sulfate, inorganic catalyzer, wasted liquid, etc.


Uses and features

This series of equipment is used in traditional Chinese medicine, food, chemical and other industries. It collects the drying and cooling of oil, sugar, fat and other heat sensitive and hygroscopic materials in a centralized manner, which can ensure the original quality of the product, good fluidity, and solvent resistance. , There is no coking and agglomeration, and the product is continuously discharged to normal temperature, which is convenient for packaging.


Specification

Type

Spray Dryer

5

25

50

100

150

200-3000

Inlet Temperature

≤ 350°C

Outlet Temperature

80-90°C

Evaporate Capacity (kg/h)

5

25

50

100

150

200-3000

Driving Force

compressed air drive

mechanical drive

Rotate Speed

25000

22000

21500

18000

18000

15000

Diameter of Atomizer (mm)

50

120

120

120

150

180-340

Heating Source

Electricity

Electricity

electricity +steam+fuel oil+coal gas

electricity +steam

electricity +steam+fuel oil+coal gas

To be solved by users

Electric-heating Power (kW)

9

45

60

81

99


Recovery Rate (%)

≥ 95

≥ 95

≥ 95

≥ 95

≥ 95

≥ 95

Installation Size

A(mm)

1000

1290

1730

2500

2800


B(mm)

2100

3410

4245

5300

6000

C(mm)

2300

4260

4645

6000

6700

φ D(mm)

1060

1800

2133

2560

2860

E1(mm)

1050

1200

1640

2100

2180

E2(mm)

1050

1200

1640

2100

2180

F(mm)

750

1000

1250

1750

1970

G(mm)

530

1700

1750

1930

2080

H(mm)

530

1300

1800

2600

3050

I(mm)

530

1550

1600

1780

1960


The following matters need to be paid attention to in daily operation of centrifugal spray dryer:

1. First turn on the centrifugal fan, then turn on the electric heating, and check if there is any air leakage. If normal, the barrel can be preheated. Because the hot air preheating determines the evaporation capacity of the drying equipment, it does not affect the quality of the material to be dried. Under the conditions, the inlet air temperature should be increased as much as possible;


2. During preheating, the valve at the bottom of the drying chamber and the discharge port of the cyclone must be closed to prevent cold air from entering the drying chamber and reducing the preheating efficiency;


3. When the inlet temperature of the drying chamber reaches 180℃~220℃, turn on the centrifugal nozzle. When the nozzle reaches a high speed, turn on the feed pump and add the material liquid. The feed volume should be from small to large, otherwise wall sticking will occur. , Until adjusted to the appropriate amount. The concentration of the material liquid should be formulated according to the temperature and nature of the material drying to ensure that the finished product has good fluidity after drying;


4. The temperature and humidity of the dried product depend on the exhaust air temperature. During operation, it is extremely important to ensure that the exhaust air temperature is a constant. This depends on the size of the feed volume, the feed volume is regulated and stable, and the outlet temperature is not changed. If the solid content and flow rate of the material liquid change, the outlet temperature will also change;


5. The product temperature is too low, you can reduce the amount of feed to increase the outlet temperature. If the temperature of the product is too high, the opposite is true. For heat-sensitive materials with lower product temperature, the amount of material can be increased to reduce the exhaust temperature, but the humidity of the product will increase accordingly;


6. The dried finished product is collected and placed in the pollinator in the lower part of the tower and the cyclone separator. The pollinator should be replaced before it is full. When replacing the pollinator, the butterfly valve above must be closed before proceeding;


7. If the dried product is hygroscopic, the cyclone separator, its pipes, and the pollinator should be wrapped with insulation material to avoid moisture absorption of the dried product.

In addition, for materials with heat sensitivity and low softening point, when the exhaust air temperature is too high, the materials will soften and the cooling air volume needs to be increased.


  Changzhou Xinggan Drying Equipment Co., LTD. is located in Jiaoxi Industrial Town of Changzhou. Changzhou is one of top 100 cities in China while Jiaoxi Industrial Town is a famous town with beautiful scenery and convenient transportation. The company covers an area of 50,000 square meters, including a 38,800-square-meter workshop. We mainly produce drying, mixing, granulating, dedusting equipment, etc. A variety of equipment we produced have been widely used throughout the world in the following areas: pharmacy, chemical, food, agricultural and sideline products processing, textiles, electronics, etc. Our company has been an important manufacturing enterprise in the drying industry for about 20 years.Our company regards the traditional drying technology as the foundation and the modern technology and production model as the direction, making innovation and research to provide customers with reliable and effective drying engineering solutions and high-quality product performance assurance. Our company also establishes a perfect after-sales service system – tracking and monitoring all products. The customers have shown positive response to our work.With demand of market, feedback of customer, and guide of era, "XINGGAN" strives to make our industry professional, efficient and large-scale. "XINGGAN" focuses on " Honesty-Oriented, Endless Striving for Excellence, Mutual Benefiting” to look forward to your trusts.
Similar Product Recommend