Membership
Help
Shenzhen Jiwei Automations Ltd.
Shenzhen Jiwei Automations Ltd.
Ring-11 Liquid Level Switch is a highly reliable instrument for liquid level detection and control. The fork length is only 40mm which makes Ring-11 applicable not only for vessels, process tanks and storage tanks, but also particularly for pipelines or other applications with constricted space. Based on the fork resonant principle, when a fork vibrates in harmonic resonance comes in contact with measured liquid, its vibrating frequency will greatly decrease. The fork’s harmonic resonant frequency has been precisely pre-adjusted to achieve high sensitivity so the lowest measurable density can be as low as 0.5g/cm³. Jiwei Ring-11 liquid level switch is excellent in level measurement for acids like HCL, H2SO4, H2SO3, and alkali liquids, syrup, medical liquids, industrial wastewater, etc. And particularly, it is suitable for pressured liquefied gas, LNG and applications under complicated working conditions where measured liquid is easy to foaming, bubbling or with high viscosity and under vibration disturbance environment etc. The special setting of gas-tight leadthrough makes Ring-11 effectively prevent accidental leakage from high-pressure strong corrosive liquids.
Ring-11 Liquid Level Switch passed SIL2 / SIL3 Functional Safety Assessment, as well as certified for both Intrinsic Safety and Flameproof Enclosure explosion protection. Currently, Jiwei has been granted an invention patent (ZL.2) on Ring-11 Liquid Level Switch.
Piezoelectricdevices are utilized to achieve vibration drive and detection. Once resonantvibrating fork comes in contact with measured medium, vibration frequency offorks substantially decreases, and the output signal from piezoelectricdetection device decreases accordingly. Then an integrated circuit is designedto analyze the signal from piezoelectric device and output a switch signal as aresult.
● High reliability due to the detection of vibration frequency.
Applicable liquid | Density | ≥0.5g/cm³ |
Viscosity | 0.1~10000mPa.s= 1 /* GB3① | |
Flow velocity | Max 6m/s | |
Probe data | Surface finish | Ra<0.5μm② |
Vibrating frequency | ~1200Hz | |
Fork length | 40mm | |
Accuracy | Measurement error | ±1mm |
Delay | 2mm | |
Repeatability | 0.1mm | |
Switching delay | When immersed | 0.5s |
When laid bare | 1s | |
Power supply | Relay output | 20~253V AC/20~72V DC |
Two-wire | 10~36V DC | |
NAMUR | 8.2 V DC | |
Transistor | 6~48V DC | |
Maximum power consumption | 8VA (AC);1.5W (DC) | |
Output | Relay output | DPDT, 5A/253V AC/24V DC |
Two-wire | 8mA/16mA, Alarm <2.3mA | |
NAMUR | ≤1mA or ≥2.2mA,Fault≤1mA | |
Transistor | NPN/PNP | |
Working environment | Process pressure | -1~64bar |
Process temperature | Regular:-50~150℃, High temperature:-50~250℃ | |
Ambient temperature | -40~70℃ | |
Storage and transport temperature | -40~80℃ | |
Overvoltage protections | Relay output | Category III, class I |
Two-wire | Category III, class II | |
Approvals | SIL Certificate | SIL2(HFT=0)/SIL3(HFT=1) |
Explosion proof types | Flameproof enclosure: Ex d IIC T6~T1 Gb, Intrinsic safety: Ex ia IIC T6~T1 Ga | |
CE | LVD and EMC certificates | |
Protection rating | IP66/IP67 | |
Materials | External Housing | Aluminum Alloy |
Ground terminal | 316L | |
Thread fitting | 316L | |
Flange fitting | 316L, 316L with enamel coating, ECTFE coating or PFA coating (Optional) | |
Fork body | 316L, 316L with enamel coating, ECTFE coating or PFA coating (Optional) | |
Process seal | Klingersil C-4400 |
Note: = 1 /* GB3 ①Assume the medium density equals to 1.
②Applicable: for food grade Ring-11 only.
● Herbicides and fungicides in insecticide Factory.
● Storage tanks of oil, crude oil, gasoline and lubricating oil.