Membership
Help
Shenzhen Jiwei Automations Ltd.
Shenzhen Jiwei Automations Ltd.
Ring-21is an economical compact tuning fork liquid level switch. It is designed with alightweight compact structure with the fork body 38 mm long, total length is160.5 mm and maximum diameter 31.5mm. Ring-21 can be applied to the levelmeasurement for vessels, process tanks and storage tanks. It can tolerate foam,air bubbles, higher viscosity and vibrating disturbance. Particularly it is abetter choice for small containers or tanks within constricted space. It isalso based on the principle that vibrating frequency changes when tines areimmersed into measured medium. The measurable density is as low as 0.7g/cm³.
Sameas Ring-11, Ring-21 Compact Liquid Level Switch is based on fork resonant principle.When fork body which vibrates in harmonic resonance immerses into the measuredliquid, vibrating frequency of tuning fork will greatly decrease, so does theoutput of piezoelectric detection device. An integrated circuit is designed to analyzesignal from piezoelectric device and output a switching signal.
● Compactand portable, with overall length 160.5mm, maximum diameter 31.5mm and the forkbody only 38mm long.
● Particularlysuitable for pipelines and other applications within constricted space.
● WithCE certificates. Economical, practical and high cost-effective ratio.
● Strongdisturbance resistant ability, not influenced by foam, bubbles, viscosity,vibration and other liquid characteristics.
● Highlyreliable because of detecting changed of vibrating frequency of the fork.
● Safe and easy tooperate, with great flexibility.
Applicable liquids | Density | >0.7g/cm3 |
Viscosity | 1~10000mPa.s= 1 /* GB3① | |
Flow Velocity | Max 6m/s | |
Probe data | Vibrating frequency | ~1200Hz |
Fork length | 38mm | |
Accuracy | Measurement error | ±1mm |
Delay | 3.0±0.5mm | |
Repeatability | 0.5mm | |
Switching delay | When immersed | 0.5s |
When laid bare | 1s | |
Power supply | Relay output | 85~253V AC |
10~35V DC | ||
Transistor NPN/PNP | 10~35VDC | |
Power consumption | AC: < 3.8mA; DC: < 825mW | |
Working environment | Process pressure | -1~40bar |
Process temperature | -50~150℃ | |
Ambient temperature | -40~70℃ | |
Storage and transport temperature | -40~80℃ | |
Overvoltage protection | Relay output | Category III, class I |
Transistor NPN/PNP | Category III, class II | |
Approvals | Protection rating | Valve connector: IP65 |
M12×1: IP66/IP67 | ||
CE | LVD and EMC certificates | |
Materials | External housing | 316L |
Process fitting | 316L | |
Process seal | Klingersil C-4400 |
● Applicationsthat expecting low cost, in non-explosive environment and within constrictedspace.
● Pipelinesin pump protection system.
● Herbicides, fungicidesand insecticide in agricultural chemicals factory.
● Level measurementand control with process temperature not exceeding 150 ℃.