Welcome Customer !

Membership

XwbooPlastic MachineryGranulatorOther GranulatorsRing Granulator
  • $item.Title
  • $item.Title

Ring Granulator

ANDE Metallurgical Machinery Equipment Co., Ltd.

Model
Nature of the Manufacturer
Other
Product Category
Other Granulators
Place of Origin
,
Ring granulator is an impact-rotor type crusher equipped with ring hammers, which can also self-rotate around hammer axis pin besides rotating with rotor. It is classified into 2 models - light/heavy:

PHQ (light) model suits to brittle materials of mohs hardness grade 2, including coal, gangue, coke, slag, shale and etc..

PHZ (heavy) model is for different kinds of rocks of mohs hardness grade 5 and below, including limestone, magnetic iron ore, phosphorous ore and etc..

Working Principle

The ring hammer can not only rotate with rotor but also self-rotate around hammer axis pin. After being fed into the crusher, the material are impacted and broken in the cavity by ring hammers rotating at high speed with rotor. With kinetic energy from ring hammer, the broken material are thrown into breaker plates and crushed for the second time while failing on the screen plates. The material are further crushed with shearing, squeezing and grinding by ring hammers and intra-collision, and finally are discharged out of the crusher through screen holes. The unbreakable impurities are pushed into metal collector to be cleaned up by operators. Product size is adjusted by replacing different models of screen plates. The gap between rotor and screen plates can be modified through a regulator mechanism.

Product Features

    Ring granulator mainly consists of drive unit, rotor, housing body, regulator mechanism and etc..


  • Drive unit

    The rotor is driven directly by the motor through fluid coupling or elastic pin coupling.

  • Rotor

    The rotor is assembled with main shaft, end plates, division plates, hammer pins and ring hammers. Ring hammer is hung over hammer pin fitted between end plates and division plates, which are fixed on main shaft with parallel keys and nuts.



  • Housing body

    The housing body is made of housing, breaker plates, screen plates, impact plates, liners and support plates. Breaker plates and screen plates are installed on support plates, of which one end is fixed on upper housing with a shaft; another end is connected with regulator mechanism through connection plates. Liners are fitted on two sides of inner wall in the housing to protect it from wearing. Breaker plates, screen plates, impact plates and rotor form the breaking cavity. The housing can be opened up at two sides by a hydraulic power pack for easy maintenance.

  • Regulator mechanism

    Regulator mechanism, consisting of worm, gear and gap indicator, is used to modify and indicate the gap between rotor and screen plates.

    Shock-absorption platform is equipped to reduce vibration and noise.

    Bearing temperature and vibration monitor box are provided on site with signals transmitted to main control room.

    Combined with fluidized bed drying system, the ting granulator can adjust moisture content of material while crushing selectively.


Technical Specification

Model No.

Output(t/h)

Feed size(mm)

Product size(mm)

Motor power(kw)

PHQ/Z1108

200

≤250

≤25

132

PHQ/Z1111

300

≤250

≤25

185

PHQ/Z1114

400

≤250

≤25

250

PHQ/Z1117

500

≤250

≤25

315

PHQ/Z1218

600

≤300

≤25

355

PHQ/Z1221

800

≤300

≤25

450

PHQ/Z1226

1000

≤300

≤25

560

PHQ/Z1229

1200

≤300

≤25

630

PHQ/Z1825

1400

≤400

≤25

710

PHQ/Z1828

1700

≤400

≤25

1100

PHQ/Z1831

2000

≤400

≤25

1200

Performance
Solution to crushing & sizing equipment and system
Company profileAs an innovative specialist involved in research & design, manufacture, engineering and technical service, ANDE has gained rich experience and achievement in crushing & sizing, vertical roller mill & grinding and palletizing technology, resulting in strong technical strength and market competitiveness. Through continuous innovation, ANDE is becoming a leading company of process equipment manufacture and engineering in metallurgy, power and mining.ANDE has about 150 employees, total of them about 40 with middle and senior professional titles, majored in metallurgy, mining, mechanical engineering design, mechanical process, welding, electrical, instrumentation, automation control and etc. It has strong research and design ability in metallurgy & mining equipment and system.ANDE is located in Chengdong Industrial Park, Mingshui Economic Development Zone, Zhangqiu, Jinan. Plant covers an area of 3 hectares and construction area of workshops is 13000 m2.Registered capital is RMB 50 million, and annunal turnover was RMB 150 million in 2019.Company has about 160 employees, out of which middle & senior title professionals constitute 30%.ANDE was approved with ISO9001 quality system certification in 2006.Since 2009, ANDE has introduced MPS VRM technology from Germany and CK mill technology from Japan, and engaged in design, manufacture and system integration of coal mill and BF slag mill.So far, more than 90 sets of grinding and coal injection system have been put into operation in well-known domestic and overseas metallurgical enterprises, such as Benxi Steel, Jinan Steel, Sanming Steel, Jianlong, Jingye, Southern Nonferrous, TATA Metalliks and HZL of India.Engineering Dept. was set up in 2010, dealing with engineering design and project management. Up to now, over 110 projects have been put into operation.Awarded by Science & Technology Bureau of Shandong Province with “Engineering Technology & Research Center of VRM and Coal Injection for Furnace & Kiln” in 2014.Awarded by Science & Tech Bureau of Shandong Province with “High-tech Enterprise” in 2015 & 2018.
Similar Product Recommend