Membership
Help
Jinan Focor Machinery Co.,Ltd
Jinan Focor Machinery Co.,Ltd
| Brief Introduction |
Name: Rocket Boomer Jumbo
Model: FK10-1BCDL
Power of Diesel engine: 50 KW
Power of Electric motor: 42.5 KW
Section (b×h): 2×2~3.5×3.5 m
Dimensions: 8300×1350×2650 mm
| Product Introduction |
Main features of FK10-1BCDL Rocket Boomer Jumbo:
(1) It is mainly used to drill blast holes for tunneling constructions in mining, metallurgy, water and electricity, railway, highway engineering;
(2) Use all hydraulic drive, with high efficiency and speed which can be 0.8-2.5 m/min.
(3) It has advanced hydraulically controlled drilling system, which is safe and simple to operate, incorporates the auto stop and anti-jamming function, auto-stop at end-point, auto wash.
(4) This jumbo has a small body, runs with the wheels, can reach a speed of 20km/h Working with electric motor can improve the working environment, reduces noise, dust and energy consumption.
(5) The flexible hydraulic rock drill can work on the section, roof, side and floor.
(6) The jumbo can not only drill blast hole, according to the the basis of section, it also can drill bolt hole conveniently with our patent impeller.
| Configuration And Technical Parameters |
Item | Parameter | |
Body | Overall size (L×W×H) | 8300×1350×2650 mm |
Hole diameter | φ33~φ102 | |
Drill pipe length | 3050 mm | |
Hole depth | 2.7 m | |
Drilling speed | 0.8~2 m/min | |
Section (W×H) | 2×2~3.5×3.5 m | |
Climbing capability | 14% | |
Total weight | ≈7000 kg | |
Bottom | Min. turning radius | 2500 m |
Running speed | ≤20 km/h | |
Climbing capability | 8° | |
Joint | inner35°, outer35° | |
Up and down | up55°, down16° | |
Rotation angle | positive180°, negative180° | |
Pitching | down105°, up15° | |
Compensation | 1500 mm | |
Thruster | Pitching | down105°, up15° |
Swing angle | inner45°, outer45° | |
Total length | 4150 mm | |
Hole depth | 2700 mm | |
Max. Propulsion | 9000 N | |
Impact oil pressure | 14~16 MPa | |
Impact flow | 30~45 L/min | |
Torque | 60~260 N·m | |
Impact energy | 100~200 J | |
Impact frequency | 34~67 Hz | |
Rotating speed | 200~400 r/min | |
Hydraulic system | Impacting loop pressure | 16 MPa |
Drill pipe rotation loop pressure | 15 MPa | |
Compensation loop pressure | 10 MPa | |
Boom loop pressure | 20 MPa | |
Propulsion loop pressure | 16 MPa | |
Leg extension loop pressure | 21 MPa | |
Running loop pressure | 20 MPa | |
Air system | Tank air pressure | 0.03 MPa |
Rock drill air pressure | 0.4 MPa | |
Water system | Rock drill water pressure | (≥)1.2 MPa |
Colder water pressure | (≤)0.6 MPa | |
Electric system | Installed power | 42.5 KW |
Supply voltage | 380 V | |
Electric motor rotation speed | 1470 r/min | |


| Main Features |

| Product Qualification |

| Other Underground Mining Machines We Supply |

| Latest News - |
Table 3 Characteristics of some common rocks
| Type of rock | Name of rock | Specific gravity | Grain size (mm) | SiO2 | Swell factor | Compressive strength MPa MPa=10kgcm2 |
Igneous | Diorite | 2.65~2.85 | 1.5~3 | 1.5 | 170~300 | |
Rock | 2.85~3.2 | >2 | 50 | 1.6 | 260~350 | |
Gabbro | 2.7 | 0.1~2 | 70 | 1.6 | 200~350 | |
Intrusi | Granite | |||||
Ve rock | ||||||
Extrusi | Andesite | 2.7 | <0.1 | 1.6 | 300~400 | |
Ve rock | 2.8 | <0.1 | 50 | 1.5 | 250~400 | |
Basalt | 2.7 | <0.1 | 1.5 | 120 | ||
2.7 | <0.1 | 1.5 | 330 | |||
Rhyolite | ||||||
Trachyto | ||||||
Conglome | 2.6 | >2 | 1.5 | 140 | ||
Sedimen | Rate | 2.5 | 0.1~1 | 80~95 | 1.5 | 160~255 |
Tary | 2.7 | <1 | 50~62 | 1.35 | 70 | |
Rock | Sand- | 2.7 | 1~2 | 2~10 | 1.6 | 150 |
Stone | 2.6 | 1~2 | 1.55 | 120 | ||
1.5~2.6 | 1~2 | 1~1.6 | 30~100 |
The hardness of limestone varies between Cretaceous and Carboniferous Period and no wearing of drilling device exists. Conventional percussion hammer is able to conduct drilling in hard lime and, rotation type rock drill is mostly used in hard limestone. Sandstone has strong explosion stability, in normal condition, drilling can be conveniently conducted by using conventional percussion hammer. Characteristics of some normal stones see Table 3.

Drillability index is also drilling speed index, it is relative drillability figure given to different rocks. It can help to forecast drilling efficiency.
The drilling efficiency is determined by frangibility value S20 and J value gained by micro rock drilling test, detailed description would not be given here. Test samples for determine drilling speed index and drill head bit wearing index are taken by diamond core-drilling machine and are used for evaluation of drillability. The rock drilling speed index and rock drill bit wearing index for most type of rocks are related each other, when the rock drilling speed index is low, its rock drill bit wearing index will be relative higher. For rock with same name, for example, the difference of mineral ingredient and quantity of quartz, grain size and form in granite is large, the difference of their drillability index is also large, here given is only the ordinary instruction of knowledge and, professional study is needed for how to make evaluation in actual work. Different drilling machine have different results to different rocks, when evaluate penetration capability, figures have commensurability only when same condition is selected.
Slow rotation and wearing of drill rod will occur in hard and toughness rocks and cause blocking or breaking of drill rod or damage of drill bit, drill rod is extremely liable to wear in abrasion-resistant rocks. Rock crevice is able to clamp the drill rod and drilling along the crevice direction and causing inclination of drill hole, the drill rod is bumping and vibration of drill truck occurs. Soft rock normally creates constraint in flushing drill holes. For this reason, for drilling workers, understanding of rock geological condition in the roadway to be excavated can avoid failure or provide prevention, reduce unexpected lose. Jumbo truck with large percussion force and torque and good abrasion-resistant drill rod are required for hard and extremely hard rocks.