Welcome Customer !

Membership

XwbooElectronic ComponentsPiezoelectric Crystal, Frequency ElementTransducerS3-FD、N3-FD FREQUENCY TRANSDUCER
  • $item.Title
  • $item.Title

S3-FD、N3-FD FREQUENCY TRANSDUCER

Haiyan Jinhan Electronics Technology Co., Ltd.

Model
Nature of the Manufacturer
Other
Product Category
Transducer
Place of Origin
,
S3-FD : Accuracy:0.2%RON3-FD: Accuracy:0.5%ROS3-FD transducer to measure power frequency and provide a DC output directly proportional to the change of input within the specified span.

1.FEATURES

■Self powered
■Excellent long term stability (4 ~ 20mA, 500 W )
■High impulse & surge protection (5KV)
■The case can be mounted on a 35mm rail which complies with DIN 46277

2.DESCRIPTION

●Model:

S3-FD : Accuracy:0.2%RO

N3-FD: Accuracy:0.5%RO

S3-FD transducer to measure power frequency and provide a DC output directly proportional to the change of input within the specified span. The input signal is shapped to square wave by the wave shappers circuit. The duty cycle of the square wave is change with the frequency of the input signal. Then the square wave is fed into an integrated circuit and the produced DC output is proportional to the input frequency.

3.SPECIFICATION

●INPUT

Input Range

Input Burden

Max. Input Over capability

Frequency

Voltage

45 ~ 55HZ

110V± 20%

or

220V± 20%

≤3.5VA

1.2 x rated continuous 2 x rated 10 sec.

4 x rated 1 sec.

55 ~ 65HZ

45 ~ 65HZ

●OUTPUT

DC Output Range

Load Resistance

Output Resistance

Output Ripple

Response Time

0 ~ 1V

1KW

≤0.05W

≤ 0.5% RO.

(Peak)

≤400mS. 0 ~ 99%

0 ~ 5V

1 ~ 5V

0 ~ 10V

0 ~ 1mA

0 ~ 10KW

20MW

0 ~ 10mA

0 ~ 1KW

5MW

0 ~ 20mA

0 ~ 500 W

4 ~ 20mA

Aux. power supply

AC 110V ± 15%, 50/60HZ

AC 220V ± 15%, 50/60HZ

DC24V, 48V, 110V, ± 15%

Power consumption

-2.5VA, ≤DC 3W

Power effect

≤0.1% RO

Waveform effect

≤0.2% RO. at distortion factor 30%( PCIR)

Output load effect

≤0.05% RO.

Magnetic field strength

-0.2% RO., 400A/M

Span adjustment range

5%RO

Zero adjustment range

1%RO

Operating temperature range

0 ~ 60℃

Operating temperature range

0 ~ 60℃

Storage temperature range

-10 ~ 70℃

Temperature coefficient

- 100PPM from 0 to 60℃

≤ 60PPM, 25。C ± 10℃

Max. relative humidity

95%

Isolation

Input/output/power/case

Insulation resistance

100M W, DC 500V

Dielectric withstand voltage

Between input/output/power/case

(IEC 414, 688,ANSI, C37) AC 2.6KV, 60HZ, 1 min.

Impulse withstand test

5KV, 1.2 X 50μS

(IEC 255-4, ANSI C37 90a) Common mode & differential mod

Performance

Designed to comply with IEC688

Safety requirements

IEC 414, BS5458

4.Trminal Connection:


5.THE OUTSIDE DIMENSION (UNIT:mm)

6.PANEL MOUNTING HOLES (UNIT:mm)

1.Order form::


2. Example of model and parameter filling:

(1) S3-FD-451A4NN

0.2 frequency transducer

Input frequency range: 45~55Hz;

Input nominal voltage: 110V ± 20%;

Output range: 4~12~20mA;

Corresponding to 45Hz~50Hz~55Hz;

No auxiliary power is required;

No dual output is required.

(2) N3-FD-006V2NN

0.5 frequency transducer

Input frequency range: 48Hz~50Hz~52Hz;

Input nominal voltage: 57.7V ± 20%;

Output range: 0~2.5~5V;

Corresponding to 48Hz~50Hz~52Hz;

No auxiliary power is required;

No dual output is required.

(3) N3-FD-456V2A70Y

0.5 frequency transducer

Input frequency range: 45Hz~55Hz;

Input nominal voltage: 57.7V ± 20%;

Output range:

I road 0~2.5~5V; corresponding to 45Hz~50Hz~55Hz;

II road -1~0~1mA; corresponding to 45Hz~50Hz~55Hz;

Auxiliary power supply; AC220V

Two outputs are required.

Note:

1.Because the input load of the whole transducer is small, the auxiliary power supply is not needed, and the input voltage to be measured is directly used, and at the same time, it is used as a power supply source, thereby identifying no input signal and normal input signal.

2. frequency transducers that do not require auxiliary power, the signal input range can only be: 110V ± 10% or 220V ± 10%

3 If the user needs other special regulations, please indicate the parameter value in the contract.

Haiyan Jinhan Electronics Technology Co., Ltd was founded on November 18, 2004 which located in Haiyan Science and Technology Park, NO 211, Yanbei Road, Zhejiang China.Our goal is to design and manufacture multiple series of products for power systems. With the ISO9001 / ISO9002 approvals, we have always sustained the principle of producing the best quality, best service and best technical skills.For over 10 years, JINHANCN has contributed and always strived to develop the most durable and stable products for the usage of power systems. We have earned excellent customer feedback and marketing reputation from all over the world.Our products have been applied to both measuring instruments and power distribution systems for utilities and related industries. And we also have developed various series of products to meet the demands of various marketing such as FP/GP/EP/S3/N3 Series High-reliability Power Transmitter, Transmission Screen, Malfunctional Electric Energy Meter, Temperature Controller etc.We truly believe that to give our customers the best service is our main purpose and long-term responsibility.With spirited teamwork, our business has expanded to global markets successfully. All JINHANCN products are originally designed and manufactured (ODM).We have been researching and developing new high-tech products continually in order to meet increasing demand for electricity. To improve business administration and quality assurance, we run CWQC (company wide quality control) with strict step by step quality compliance to our production procedure in compliance with ISO9001.
Similar Product Recommend