Welcome Customer !

Membership

XwbooInstrumentationFlow MeterFlowmeterSanitary electromagnetic flowmeter
  • $item.Title
  • $item.Title

Sanitary electromagnetic flowmeter

iangsu Zhongwei Measurement and Control Co., Ltd.

Model
Nature of the Manufacturer
Other
Product Category
Flowmeter
Place of Origin
,

iangsu Zhongwei Measurement and Control Co., Ltd.

Contact

Phone

18852328848

Fax

0517-86918679
Sanitary electromagnetic flowmeter
Description:

I. product overview
Zw-lde /W series sanitary electromagnetic flowmeter adopts MCU embedded technology to realize digital excitation, and CAN fieldbus is adopted on electromagnetic flowmeter, which belongs to domestic *, and the technology reaches the advanced level in China. Is a high performance, reliable flowmeter, it USES a new generation of special high-quality sanitary lining materials and easy to clean the connection mode, widely used in food, medicine and brewing and other health requirements of higher industry flow measurement.
Ii. Working principle
The principle of zw-lde /W series sanitary electromagnetic flowmeters is based on Faraday's law of electromagnetic induction. A pair of detection electrodes are installed on the tube wall perpendicular to the measuring tube axis and magnetic force line. When the conductive liquid moves along the measuring tube axis, the conductive liquid cuts the magnetic force line to generate an induction potential, which is detected by two detection electrodes. The value is directly proportional to the flow.
E- induction potential;
K- coefficient related to magnetic field distribution and axial length;
B- magnetic induction intensity;
V- average velocity of conductive liquid;
D- electrode spacing; (measuring pipe diameter)
The sensor takes the induced potential E as the flow signal and transmits it to the converter. After amplification, transformation and filtering, the sensor USES a series of digital processing to display the instantaneous flow and cumulative flow with a backlit point-matrix liquid crystal display. Converter has 4 ~ 20mA output, alarm output and frequency output, and rs-485 communication interface, and support HART and MODBUS protocol.

Iii. Application:
ZW - LDE/W series health type electromagnetic flowmeter in food, medicine and other health industry, the process often need to use the high temperature steam cleaning and disinfection, and pipe joint position, including flow meter sensor, there can be no traces of medium, in order to prevent the bacteria multiply, so the health industry pipe connected to the meter generally adopted quick joint form, namely the clamp type structure. Can be widely used in mineral water, soy sauce, jam, beer, fruit juice, rice wine, milk and other food production process and health, chemical and other fields.

Iv. Structure:
1. Sensor:
The sensor is mainly composed of a measuring conduit, a measuring electrode, an exciting coil, an iron core, a magnetic yoke and a housing.
A. Measuring catheter: it is composed of stainless steel catheter, lining and connecting flange, and it is the carrier for field working condition measurement of the measured liquid.
B. Measuring electrode: a pair of electrodes mounted on the inner wall of the measuring catheter perpendicular to the axial flow direction to generate signals from the measuring liquid.
C. Field coils: the upper and lower field coils that generate the magnetic field in the measuring tube.
D. Iron core and magnetic yoke: conduct the magnetic field generated by the excitation coil into the liquid and form a magnetic circuit.
E. Housing: outer packing of instrument.
2. Converter:
It is an intelligent secondary meter, which can display the flow and accumulative amount after amplifying the flow signal and processing the single-chip computer calculation, and can output pulse, analog current and other signals for the measurement or control of fluid flow.
3. Product assembly:
It is divided into two forms: one body type and two body types.
A. Type I: integrated installation of sensors and converters.
B. Fracturing: the sensor and converter are separated and installed, and the flow metering system is formed by connecting cables.

V. main features:
1. New sanitary lining material is adopted to prevent the accumulation of measurement medium residues in the measurement tube.
2. The measuring pipe has no obstructing moving parts, no pressure loss and low requirements for straight pipe section.
3. The sensor adopts the new generation of special high-quality lining technology, and USES the special mirror polishing PFA lining.
4. The intelligent converter can display measurement data such as volume flow percentage, instantaneous flow and cumulative flow at the same time.
5. Adopt the quick connection scheme, the electromagnetic flow meter is convenient for disassembly, maintenance and cleaning. The intelligent converter adopts LCD backlight LED display, which can read clearly even in strong light or at night.
6. The parameters can be set through the infrared touch button, and the cover plate of the converter can be set safely without opening in the harsh environment.
7. The converter has the functions of self-diagnosis alarm, empty load detection alarm, flow upper and lower limit alarm and flow value alarm output at both poles.
8. 16-bit embedded microprocessor is adopted for signal processing, featuring high integration, fast operation speed, high calculation accuracy, full digital signal processing, strong anti-interference ability and reliable measurement.
9, high definition backlight LCD display, full Chinese menu operation, easy to use, simple operation, easy to learn and easy to understand.
10 with RS485, RS232, Hart and Modbus digital communication signal output.
Vi. Technical parameters
1 nominal diameter: dn10-dn300mm;
Accuracy: 0.5% of the indicated value, 0.3% or 0.2% of the optional indicated value;
3: medium temperature points size - 10 ℃ ~ + 180 ℃; A body - 10 ℃ ~ + 80 ℃;
4: ambient temperature 25 ℃ ~ + 60 ℃;
5 medium conductivity: greater than 20 s/cm;

6 lining: PTFA;
Electrode materials: molybdenum stainless steel, hastelloy B, hastelloy C, titanium, tantalum, platinum, iridium alloy;
8 electrode form: three electrode structure, two electrode structure, removable electrode structure;
Installation: type I, type ii;
10 shell protection class: sensor IP65,IP68 optional (IP65: dust tight, waterproof,IP68: dust tight, can work under water for a long time.) Converter IP67 (IP67: dust tight, short time immersion);
Explosion-proof mark: the explosion-proof grade of explosion-proof sensor is ExmdIIBT4.
Vii. Advantages of flow meter
1. The coil, an important part of the sensor, is optimized for the zui design, and the measurement accuracy of the product is ensured through the zui rigorous field test.
2. The signal electrode is completely shielded by electrostatic shielding to ensure that small signals will not be interfered by coils and to ensure the measurement accuracy of low velocity.
3. The coil is isolated from the outside world to ensure the long-term insulation strength of the coil and the long-term measurement accuracy of the sensor.
All welders of the sensor adopt the argon arc welding process, which can ensure the reliability of welding (welding is the main production process of zui of the sensor) despite the high cost. In particular, the welding process after the installation of the zui coil can ensure that the installed coil is not damaged by the argon arc welding process.
5. The grounding electrode structure is adopted to form a balanced electrode plane to ensure that the whole process of measuring the average speed is limited to the balanced electrode plane, which can well eliminate electrical noise interference and provide accurate measurement results.
6. Customized double-layer shielding cable is adopted.
7, programmable frequency rectangular wave excitation, improve the stability of flow measurement, low power loss.
8. Special medium measurement (such as slurry) adopts high-frequency excitation to eliminate clutter interference.
9. 16-bit embedded microprocessor is adopted for fast operation and high precision.
10. All-digital processing, strong anti-interference ability, reliable measurement and high precision.
11. Ultra-low EMI switching power supply, suitable for power supply with wide voltage variation range and good EMC resistance.
12, complete all functional design with a single circuit board, using SMD devices and SMT (surface mount) technology, high circuit reliability.
13, high definition backlight Chinese LCD display, display cumulative flow, instantaneous flow, flow rate, flow percentage, etc.
14, menu operation, easy to use, simple operation, easy to learn and easy to understand.
15, with self-test and self-diagnosis function, and display on the screen.
16. Unique lightning protection design.

Viii. Product classification and technical description

Intelligent sanitary electromagnetic flowmeter: clamping type, thread type, clamp type three.

1, clamping type health

Main technical indicators:

iangsu Zhongwei Measurement and Control Co., Ltd. is located in Huaian City, the hometown of Premier Zhou, a great man of one generation. It has beautiful scenery, pleasant climate and abundant products. Main Products: Main Products: Intelligent Vortex Street Flowmeter, Intelligent Electromagnetic Flowmeter, Liquid Turbine Flowmeter, Elliptical Gear Flowmeter, Universal Electronic Flowmeter, Magnetoelectricity Flowmeter, Swirl Flowmeter, Metal Tube Float Meter, Wilba Flowmeter, Delta Bar Flowmeter, Orifice Flowmeter, Balanced Flowmeter, Air Measuring Device, Heat Meter, Ultrasound Flow Meter Meters, magneto-sensitive electronic double-color liquid level gauge, boiler drum level gauge, mica double-color water level gauge, radar level gauge, ultrasonic level gauge, magnetic turning plate level gauge, level (level) switch, pressure differential pressure transmitter, thermometer, thermoresistor, thermocouple, display, recorder, calibration equipment, wire and cable, control valve, etc. Professional R&D and sales of industrial automation products, providing integrated technical services of industrial automation system, is a comprehensive industrial automation product R&D and technology enterprise in China, which is built and developed at the beginning of the industry scale.The company's quality assurance system is complete. The company has a number of high-tech professionals engaged in the design, development, installation and commissioning of automation control research for a long time, which provides a satisfactory set of systems for various industries. It gathers strong professional team, accumulates abundant technology and management experience, covers the national marketing network and branches, and can provide users with technical services quickly and conveniently. In the era of Internet commerce, the company has set up the E-Commerce Department, relying on professional network technology and e-commerce trade means, to implement the integration of traditional economy and resources as well as rapid market expansion in a wide range. Since its establishment, the company has established a long-term and stable business and trade partnership with manufacturers in various regions by virtue of its good reputation and high-quality service.In line with the business philosophy of "satisfying customer's needs and creating value for customers", we have provided a large number of complete sets of services for users in oil field, power, chemical industry, metallurgy, paper-making, cement and other industries for many years to improve more seamless services for our customers. You can purchase online, learn business knowledge independently, serve your customers better, and create more value for you for five consecutive years. Our products are sold overseas, and we have distribution agents in many regions to further increase domestic marketing and expand the brand of Zhongwei. From 2011, we will recruit agents and distribute in the whole country. We can also provide OEM services for you. The quality service is consistent with that of Jiangsu Zhongwei. We promise you the best quality, the best service and the best price!The company adheres to the development policy of "science and technology, innovation, quality and service", continues to adhere to the purpose of "building an industrial aircraft carrier and contributing to the national economy". In the future development, it will continue to devote itself to brand building and constantly cultivate new economic growth points. Jiangsu Zhongwei will actively participate in market competition with high-quality products, preferential prices and excellent services, and wholeheartedly participate in friends from all walks of life. Friends, old and new customers cooperate in good faith, work hand in hand with Zhongwei measurement and control, create a better tomorrow.
Similar Product Recommend