Membership
Help
Kangsaite Automation Group Co., Ltd.
Kangsaite Automation Group Co., Ltd.
Introduction
Scotch Yoke type pneumatic actuators usually refer to “single-cylinder double-piston-variable-torque fork type” pneumatic actuators, which are a range of piston-type actuators and are suitable for valves with a 90 ° angle (such as ball valves, butterfly valves, Stop valve or metering control).
Features
A. CE certificate and According with international Standards, such as NAMUR,ISO5211 and DIN.
B. Integrated Design with Stable Quality.
C. Dual Piston rack and Pinion Design with High Output Power.
D. Multi-position Indicator, On-site Visual Instruction.
E. Large operating force, Small flow resistance.
F. Novel Valve Body Design.
G. Large rated flow coefficient, large allowable pressure difference and excellent sealing performance.
Product | Scotch Yoke Pneumatic Actuator |
Structure | Scotch Yoke Rotary Actuator |
Rotary Angle | 0-90 Degree |
Air Supply Pressure | 2.5-8 Bar |
Actuator Body Material | Aluminum Alloy, Stainless Steel, Carbon Steel. |
Surface Treatment | Hard Anode Oxidation |
Operating Temperature | Standard Temperature:-20℃ ~ 80℃ Low Temperature:-15℃ ~ 150℃ High Temperature:-35℃ ~ 80℃ |
Connection Standard | Air interface: NAMUR Mounting Hole: ISO5211 & DIN3337(F03-F25) |
Application | Ball Valve, Butterfly Valve & Rotary Machines |
Components & Materials

Part No. | Part Name | Material | Part No. | Part Name | Material |
1 | Cylinder | Aluminum (Hard anode Oxidation) | 15 | Piston | Cast Aluminum Alloy (Hard Oxide) |
2 | Transmission shaft | Alloy Steel (Nickel Plating) | 16 | Pison O-ring | NBR |
3 | Scotch Yoke | Alloy Steel | 17 | Piston Support Ring | Engineering Plastic |
4 | Upper Shaft Support Ring | PTFE+Graphite | 18 | Piston Sliding Block | Engineering Plastic |
5 | Upper Shaft O-ring | NBR | 19 | Piston Pin | Bearing Steel |
6 | Upper Bushing | Engineering Plastic | 20 | Bearing | Bearing Steel |
7 | Lower Shaft support ring | PTFE+Graphite | 21 | End cap bolt | 304 |
8 | Lower shaft O-ring | NBR | 22 | End Cap | Die-cast Aluminum Alloy(Spray) |
9 | Lower bushing | Engineering Plastic | 23 | End Cap O-ring | NBR |
10 | Limit Block | Alloy Steel | 24 | Spring Cover | Engineering Plastic |
11 | Inner Gasket | PTFE+Graphite | 25 | Spring | Spring Steel(Electrophoresis) |
12 | Outer Gasket | Engineering Plastic | 26 | Adjustment Bolt O-ring | NBR |
13 | Flat Pad | 304 | 27 | Adjustment Nut | 304 |
14 | Retaining Ring | 304 | 28 | Adjustment Bolt | 304 |
Scotch Yoke Pneumatic Actuator Torque(N.m.)

K Series Scotch Yoke Pneumatic Actuator

KST (Kangsaite) Group Qualification(Certificate)

Pneumatic Actuator FAQ
Q1: Pneumatic Valve can’t Move ?
A1: Check the Solenoid Valve is normal or not;Test the actuator separately with air supply;Check the handle position.
Q2: Pneumatic Actuator with slow motion ?
A2: Check air supply is enough or not;Test the Actuator Torque is ok or not for the valve;Check Valve coil or other components are too tight or not;
Q3: Reply Devices without Signal ?
A3: Inspect and repair power circuit;Adjust the cam to correct position;Replace micro switches.
←Aluminum Aelly Pneumatic Actuator
Three Position Pneumatic Actuator→
Double Acting Pneumatic Actuator
Stainless Steel Pneumatic Actuator
Rotary Pneumatic Actuator
Three Position Pneumatic Actuator
Spring Return Pneumatic Actuator
Aluminum Aelly Pneumatic Actuator