Membership
Help
Yantai Chongyang Machinery Co., Ltd.
Yantai Chongyang Machinery Co., Ltd.
Introduction:
Add the loose material into the large hopper above the feeding cylinder of scrap metal compressing machine. Fuel is fed into the rear chamber of the feeding cylinder of scrap metal compressing machine, the piston rod sticks out, and reset, and then the oil is fed into the sub-cylinder rear cavity, drive the main cylinder piston rod and punch down quickly, when the punch into the cavity, the pressure oil enters the rear chamber of the master cylinder, the main cylinder begins to attack and compress the material into crumb cake, and after pressure, main cylinder slightly back, oil is fed into the rear chamber of the auxiliary cylinder, the piston rod back, drive the drawing block back to the pie block can be out of the position, the main cylinder continues to fall, the pressure of the cake block out of the mold cavity, the deputy cylinder before the cavity into oil, piston rod out, drive the drawing block to push out the cake block, at the same time reset. Finally, the front cavity of the sub-cylinder drives the piston rod and punch of the main cylinder to rise, and reset, scrap metal compressing machine complete a cake pressing cycle process, and enter the next cycle.
