Welcome Customer !

Membership

XwbooInstrumentationLaboratory equipmentOther Laboratory equipmentsSealed Coal Hammer Crusher
  • $item.Title
  • $item.Title

Sealed Coal Hammer Crusher

Qingdao Yosion Intelligent Technology Co.,Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Other Laboratory equipments
Place of Origin
ShanDong, QingDao

Qingdao Yosion Intelligent Technology Co.,Ltd.

Contact

Phone

18266399631

Fax

Related categories
The laboratory hammer crusher is a crusher that directly crushes materials with a maximum particle size of 50-150 mm to below 1, 3, 6, and 13 mm for laboratory sample preparation.

Introduction

Sealed Coal Hammer Crusher

The laboratory hammer crusher is a crusher that directly crushes materials with a maximum particle size of 50-150 mm to below 1, 3, 6, and 13 mm for laboratory sample preparation.


The laboratory hammer crusher is mainly used for coarse crushing, medium crushing and fine crushing of raw materials. Such as coal, coke, limestone, pyrite, phosphate rock, coal gangue and other materials that need to be crushed. The crushing method is chopping crushing. The maximum lumpness of the material to be crushed should be less than 10--60 mm of the size of the nozzle of the selected machine model. The specific size should refer to the technical parameter table. The compressive strength of the crushed material is ≤800MPa.


This series of machines is a sealed high-speed crushing and shrinking combination machine. Its main advantages are the use of sealed protective type, which meets the requirements of environmental protection and safe production, and has high production efficiency, fast sample preparation speed, service life, and convenient operation, maintenance and cleaning. It is a laboratory,and upgraded broken sample preparation and division equipment.


Application

Widely used in coal, electric power, metallurgy, chemical industry, building materials, geology, scientific research and other departments.


Features

Its working principle uses impact crushing. When the material enters the crusher, it is impacted by the centrifugal force of the high-speed rotating rotor movable hammerhead, so that it obtains a certain kinetic energy, so that the material and the inner wall collide with each other, rub, and crush. It can be directly reduced into a sample with a particle size of less than 6 mm or less than 3 mm and a weight equal to 1/8 of the feed sample.


The machine completes three steps of crushing, sample mixing and shrinking quickly and continuously, which greatly improves the work efficiency, completely replaces and surpasses manual operation, avoids the error of manual operation, and avoids dust pollution, so that the staff can have a healthy work surroundings.


1. Fully sealed design, no dust pollution, meeting environmental protection requirements.

2. The crushing working cavity is precisely made of alloy structural steel, wear-resistant and durable, and effectively prevents sample contamination and overheating.

3. The full-width high-manganese steel hammer head can crush the material in full-section, the working cavity is not blocked, and there is no dead corner storage.

4. Large crushing ratio, uniform discharge particle size, and high sample preparation efficiency. It is suitable for all kinds of materials and samples without clogging or loss of moisture.

5. Operation, cleaning and maintenance are very convenient. Smooth operation and low noise.

6. All transmission components have protective facilities, which meet the requirements of safe production.


Technical Parameter

Model

YXZ-250×360

YXZ-180×150

Feed Size

≤150mm

≤50mm

Output Size

<13、<6、<3mm(adjustable)

<6、<3、<1mm(adjustable)

Capacity

1800~1000kg/h

600~300kg/h

Weight

320kg

180kg

Dimension

1000×820×1320mm

850×610×1200mm

Power

Y112M-4/4KW

Y90L-4/1.5KW

Voltage

3P,380V、50HZ

3P 380V、50HZ


Product Photos

Sealed Coal Hammer Crusher

  ※ Our HistoryQingdao Yosion Intelligent Technology Co.,Ltd. built in 2014, a equipment manufacturer and your solution for mining laboratory needs, integrating research & development, production, sales and service.※ Our FactoryRelying on its own factory and a strong R&D team, we can provide customers with quality products and customized services.Factory2FACTORY※ Our ProductOur main business is automated sampling & preparation system, sample preparation equipment, containerized laboratory, fire assay equipment & consumables, analysis equipment and lab deducting system, etc.※ Product ApplicationOur products are mainly used in major ports, entry-exit inspection system, research institutes, steel mills, mining companies, independent detection institutions and so on.※ Our CertificateMore than 20 invention and utility model patentsState-level high-tech enterprise awardISO certified
Similar Product Recommend