Welcome Customer !

Membership

XwbooGeneral Machinery Valve Other ValvesSelf-electric temperature control valve
  • $item.Title
  • $item.Title

Self-electric temperature control valve

Shanghai Hufa Fluid Technology Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Other Valves
Place of Origin
ShangHai, ShangHai
Model: ZZWPE typeNominal diameter: DN15~ 200mmNominal pressure: PN1.6~4.0MPaMedium: steam, water, oil, gasflange standard: GB4216-84 by cast iron flanges, flange steel press GB9113-88

Product description:

Self-operated electric temperature control valve (for larger caliber and thermal oil control), the valve features only the most common 220V power supply, the use of the media itself is adjusted to the energy directly to the steam, hot water, hot oil and gas and other media The temperature of the implementation of automatic regulation and control, can also be used to prevent overheating or heat exchange occasions, the valve structure is simple, easy to operate, the selection of a wide range of temperature control, fast response time, reliable sealing performance, and can be adjusted during operation , Which is widely used in chemical, petroleum, food, textile, hotels and restaurants and other departments of hot water supply.

Part Information:

◆ Structure and Principle
Control valve consists of main valve, intelligent actuator and sensor composed of three parts, according to user needs, respectively, heating and cooling of two structures. 
1. The structure and principle of the heating control valve, see the attached diagram: 
Before work, the main valve core is in the half-open position and the sensor is in a natural state. Connect the power, the main spool fully open. The medium flows into the main valve body in the direction of the arrow, and the heat storage tank is heated by the valve core. When the temperature rises to the corresponding set value, the sensor generates a corresponding linear signal input integrated intelligent actuator, then drive the stem, the valve spool displacement, turn off the main valve to stop heating. When the temperature is lower than the set value, the sensor generates a linear signal input to the actuator, which drives the valve element to be involute, allowing the medium to flow into the thermal storage tank according to the parabolic characteristic and heating up to the set value. This controlled media is always in the set temperature range is controlled, so as to achieve the purpose of temperature control. 

Outline drawing 
(1) Intelligent actuator 
(2) Main valve body 
(3) Sensor 
(4) Capillary tube 
(5) Manual mechanism 
Remarks: It is often said that the heating type, cooling type. In this valve as long as the spool structure can be replaced.

Technical Parameters:

◆ The main parameters and materials

1, the main parameters table

Nominal diameter (mm)

15

20

25

32

40

50

65

80

100

125

150

200

Nominal pressure PN (MPa)

1.6 4.0

Flow capacity (m 3 / h)

5

7

10

16

25

40

63

100

160

250

400

630

Rated travel (mm)

6

8

10

14

20

30

30

40

Temperature adjustment range (℃)

0 to 120: 100 to 250

Adjustment accuracy (℃)

± 1 ~ ± 5

Use media

Steam, water, oil, gas

allow

Leakage

Hard seal

10 -4 X valve rated capacity

Soft seal

"0"

Capillary length

3m, 5m, 10m

Warm package into the depth

270, 430, 630

Coupling thread

3/4 "1"

◆ supporting the use of electric actuators related technical parameters

Nominal diameter DN (mm)

20

25

32

40

50

65

80

100

125

150

200

Electric actuator model

normal type

ZAZ-60

DKZ-310

ZAZ-60

DKZ-310

DKZ-410

DKZ-410

DKZ-510

Electronic type

JHZAZ1

JHZAZ2

JHZAZ3

JHZAZ3

Electric Actuator Thrust (N)

normal type

400

4000

400

4000

6400

6400

16000

Electronic type

2000

4000

6000

8000

The whole trip

time

(S)

normal type

12.5

20

32

48

Electronic type

30

30

48

60

Power consumption (W)

normal type

28

35

Electronic type

6

15

25

40

* The table data is only conventional configuration, the specific selection based on the main parameters and user requirements.

Connection standard:

◆ connection size and standard
· Flange standard: Cast iron flange according to GB4216-84, Cast steel flange according to GB9113-88 
· Flange sealing surface type: PN10, PN16 convex PN40, PN64 concave surface, the valve body is concave 
· Structure length: GB12221-89 Jacket 
Insulation Jacket Heating Body Interface: Butt Weld φ18 × 4 
* The body flange and flange end face distance can be manufactured according to user-specified standards. Such as ANSI, JIS, DIN and other standards. 
◆ Ordering Information When 
ordering, please provide the following information: 
· Control valve name and model 
· Nominal diameter (mm) 
· Nominal pressure (MPa) 
· Rated flow coefficient (Kv) 
· Fixed flow characteristics 
· Media name, valve pressure, temperature , Flow rate, etc. 
· The whole machine mode of operation (electric open, electric) and the input signal 
· Body, valve trim and packing material 
· Accessories (manipulators, servo amplifiers, etc.) 
· Other special requirements


  Hufa Holding Co., Ltd. Is a well-known manufacturer and supplier of common valves such as emergency cut-off valve, pressure reducing valve, regulating valve, chemical valve, water control valve and electric two-way valve.Mainly used in petroleum, chemical, steel, metallurgy, building materials, light industry, electricity, environmental protection, food and other industries, products throughout the country and are used in many national key projects, but also exported to Asia, Europe and other regions.Main products include: solenoid valve, regulating valve, chemical valve, water control valve, electric two-way valve, general valve;6 main products for a variety of industrial needs to provide a full range of fluid control solutions.Hufa Holding Co., Ltd. strives to build a well-known high-end control valve manufacturing enterprises, national high-tech enterprises, specializing in high-end control valve scientific research design, manufacturing and sales, technical exchanges, import and export trade in one of the international entity enterprise headquarters is located in zhejiang, the pump and valve capital of China.The company was founded in July 2004, Shanghai branch production base is located in Shanghai, construction area 1250 square meters, and has the domestic leading production equipment and multi-functional, intelligent valve inspection system and test center.Companies adhere to the advanced equipment localization and technical independent innovation, the pursuit of do the best employees, do the best products and the best enterprise goal, strive to build the company into a domestic first-class, the world level of control valve supplier, for the continuous development of automation industry to make greater contribution!Today's Shanghai valve brand has formed a technical system with independent intellectual property rights as the core, relying on science and technology for innovation;Set up r&d center, used in technical improvement, innovation and development of new products, and the introduction of the United States, Germany, Japan and other advanced level of technology and products, through the absorption and reference to manufacturing technology, perfect products, form with independent core high-end products, reduce the distance with the world's advanced products, in the domestic and international market to get customers' trust and respect.Related products have won many honors such as Shanghai high-tech achievements transformation, and won the high-tech enterprise in 2011.At the same time, the company is the first in the domestic industry through TS(pressure pipe components manufacturing license), explosion-proof electrical production license, ISO9001 (international quality management system), CE (European Union safety mark) and other quality systems and special industry requirements certification system. Hufa products are distributed throughout the country and applied in many national key projects, mainly used in petrochemical industry, aerospace, national defense, hvac, electric power equipment, biopharmaceutical, medical equipment, food machinery, environmental protection water treatment and other industries;Ju liang company and Shanghai baosteel, navy logistics, China petroleum group, tongfang shares, hangzhou holishi, kweichow maotai distillery, China nuclear power, the 12th national games of the main torch Taiwan and many other well-known enterprises and key projects to establish a good relationship of cooperation.Business philosophy of Shanghai Valve:Persist in not forgetting the original intention, continue to move forward; while pursuing the material and spiritual happiness of all Shanghai Valve partners, go all out to make perfect products and contribute to social progress.Company purposeTechnological innovation, quality assurance, honesty, efficiency and considerate serviceCorporate objectivesEstablish an international first-class control valve of Chinese enterprises.Company value
Similar Product Recommend