Membership
Help
Wuxi Mayshee Developing Company., Ltd
Wuxi Mayshee Developing Company., Ltd

Semi-Tubular rivets are one of the most common rivets used today. Semi-tubular rivets are essentially the same as solid rivets, but with a shallow hole at the tip, opposite the head. This hole causes the tubular portionof the rivet (around the hole) to roll outward when force is applied. This reduces theamount of force needed for installationtubular rivets require roughly ¼ the force of solidrivets. Semi-tubular rivets can also be used in assemblies that require some type of movement as the amount of force used to clinch the rivet can be reduced to allow for this. Semi-tubular rivets are also ideal for high speed assembly and feed automatically in high speed riveting machines.
Use these rivets to fasten soft material such as leather, fabric, and plastic.Installation requires access to both sides of the material. Use a hollow rivet tool or a hammer to flare out the hollow portion of the rivet.
Hollow-end rivets are also known as semi-tubular and brake-lining rivets. The bottom half of the body is hollow and because it is the only part of the rivet that expands during installation, they are often used as pivot points.

∅ | 1.2 | 1.4 | 1.6 | 2 | 2.5 | 3 | 3.5 | 4 | 5 | 6 | 8 | 10 | |
d | MAX | 1.25 | 1.45 | 1.65 | 2.1 | 2.6 | 3.1 | 3.6 | 4.1 | 5.15 | 6.15 | 8.15 | 10.2 |
MIN | 1.15 | 1.35 | 1.55 | 1.9 | 2.4 | 2.9 | 3.4 | 3.9 | 4.85 | 5.85 | 7.85 | 9.8 | |
dk | DN(max) | 2.4 | 2.8 | 3.2 | 4 | 5 | 6 | 7 | 8 | 10 | 12 | 16 | 20 |
MIN | 2.2 | 2.6 | 2.9 | 3.7 | 4.7 | 5.7 | 6.42 | 7.42 | 9.42 | 11.3 | 15.3 | 18.7 | |
d3 | MIN | 1.12 | 1.32 | 1.52 | 1.87 | 2.37 | 2.87 | 3.37 | 3.87 | 4.82 | 5.82 | 6.82 | 9.4 |
d1 | MIN | 0.65 | 0.8 | 0.9 | 1.2 | 1.7 | 1.9 | 2.2 | 2.7 | 3.5 | 4.2 | 6 | 7.6 |
MAX | 0.77 | 0.92 | 1.04 | 1.34 | 1.84 | 2.04 | 2.34 | 2.84 | 3.68 | 4.38 | 6.18 | 7.82 | |
k±0.125 | 0.5 | 0.6 | 0.7 | 0.9 | 1.1 | 1.3 | 1.5 | 1.8 | 2.2 | 2.6 | 3.5 | 4.4 | |
t | MAX | 1.6 | 1.8 | 2 | 3 | 3 | 3.5 | 4.5 | 4.5 | 5.5 | 7 | 8.5 | 10.5 |
DN(min) | 1.1 | 1.3 | 1.5 | 2.5 | 2.5 | 3 | 4 | 4 | 5 | 6.5 | 8 | 10 | |
l | 1.5 | ● | |||||||||||
2 | ● | ● | ● | ● | |||||||||
2.5 | ● | ● | ● | ● | |||||||||
3 | ● | ● | ● | ● | ● | ||||||||
3.5 | ● | ● | ● | ● | ● | ● | |||||||
4 | ● | ● | ● | ● | ● | ● | ● | ||||||
5 | ● | ● | ● | ● | ● | ● | ● | ● | |||||
6 | ● | ● | ● | ● | ● | ● | ● | ● | ● | ||||
7 | ● | ● | ● | ● | ● | ● | ● | ● | ● | ||||
8 | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |||
9 | ● | ● | ● | ● | ● | ● | ● | ● | ● | ||||
10 | ● | ● | ● | ● | ● | ● | ● | ● | ● | ||||
11 | ● | ● | ● | ● | ● | ● | ● | ● | ● | ||||
12 | ● | ● | ● | ● | ● | ● | ● | ● | ● | ||||
13 | ● | ● | ● | ● | ● | ● | ● | ● | ● | ||||
14 | ● | ● | ● | ● | ● | ● | ● | ● | |||||
15 | ● | ● | ● | ● | ● | ● | ● | ● | |||||
16 | ● | ● | ● | ● | ● | ● | ● | ● | |||||
17 | ● | ● | ● | ● | ● | ● | ● | ||||||
18 | ● | ● | ● | ● | ● | ● | ● | ||||||
19 | ● | ● | ● | ● | ● | ● | ● | ||||||
20 | ● | ● | ● | ● | ● | ● | ● | ||||||
22 | ● | ● | ● | ● | ● | ● | ● | ||||||
24 | ● | ● | ● | ● | ● | ● | ● | ||||||
26 | ● | ● | ● | ● | ● | ● | ● | ||||||
28 | ● | ● | ● | ● | ● | ● | ● | ||||||
30 | ● | ● | ● | ● | ● | ● | ● | ||||||
32 | ● | ● | ● | ● | ● | ● | |||||||
34 | ● | ● | ● | ● | ● | ● | |||||||
36 | ● | ● | ● | ● | ● | ● | |||||||
38 | ● | ● | ● | ● | ● | ||||||||
40 | ● | ● | ● | ● | ● | ||||||||
42 | ● | ● | ● | ● | |||||||||
44 | ● | ● | ● | ● | |||||||||
46 | ● | ● | ● | ● | |||||||||
48 | ● | ● | ● | ● | |||||||||
50 | ● | ● | ● | ● | |||||||||