Welcome Customer !

Membership

XwbooInstrumentationFlow MeterFlowmeterSewer flow meter
  • $item.Title
  • $item.Title

Sewer flow meter

Fuzhou Hengfengtai Automation Equipment Co., Ltd.

Model
Sewer Flowmeter
Nature of the Manufacturer
Other
Product Category
Flowmeter
Place of Origin
,

Fuzhou Hengfengtai Automation Equipment Co., Ltd.

Contact

Mr. Li 1

Phone

18650366186

Fax

Model: Sewer FlowmeterPurpose: online measurementProtection level: IP68

Sewer flowmeter.doc

1. Product and technical parameters

1.1 Product introduction

    This product is a flow meter for measuring rainwater or sewage flow in the sewer or in the pipe that is not full Trough to control the water flow from the fixed outlet.

1.1.2 The product is divided into two parts: transmitter and sensor.

1.1.2.1 All the sewer flow meters installed in the wells transmit data to the background through phone traffic. Each part is connected with an IP68 waterproof connector. If any part fails, just unplug the aviation plug and replace the separate part. The battery box (optional accessory) is only used when there is no way to supply power on site. The effective use time of the battery is inversely proportional to the working time of the flowmeter, wireless transmission and the working time of the power controller.

1.1.2.2 When the transmitter can be installed outside the well, external power supply can be used, and only the sensor is inside the pipeline. It transmits data through 485 or 4-20ma.

 

1.2 Technical parameters

Model: HFT-FMG01LS-FJDNSY (The model will be different according to different functions)

Structure: split type;

Measurement types: flow velocity, water depth, water temperature, flow

Flow measurement instructions:

1. All equipment is IP68 protection grade, and the upper computer software displays the flow rate.

2. The host is IP66 protection level, and the host displays and outputs traffic.

Protection level: IP68

Purpose: online measurement

Flow velocity range: 0.05m/s~5.00m/s (minimum water depth: 10cm above the sensor);

Flow rate measurement resolution: 1mm/s;

Flow velocity measurement accuracy: ±2%;

Water depth measurement range: 0.03m~10.00m;

Water depth measurement resolution: 2mm

Water depth measurement accuracy: ±1.0%;

Temperature measurement range: 0~60ºC;

Temperature measurement resolution: 0.1ºC;

Temperature measurement accuracy: ±2℃

Flow measurement range: 1 liter/sec~ cubic meters/hour

Power supply: battery powered, 12VDC;

Output signal (battery powered): RS485, RS232;

Wireless transmission: low-power GPRS wireless data transmission and acquisition card

Cable length between sensor and transmitter: 10 meters;

Types of tested waterways: pipes, channels, natural streams, rivers;

Liquid pH requirements: PH value is between 6 and 8, non-corrosive to the sensor.

Liquid temperature requirement: 0~50℃

Liquid pressure requirement: 1 standard atmospheric pressure in natural environment

other:

1. The various settings of the field flowmeter can be modified remotely from the server software through the phone flow transmission signal. (Currently, only phone cards of China and China Unicom are supported.)

2. The location of the on-site flowmeter can be uploaded.

3. In the case of poor communication, you can save the data in this machine, up to 50,000 data, wait for the communication to be normal before uploading the data

 Supporting software:

Data acquisition system 1 set of low-power GPRS wireless data acquisition and transmission software

Integrated management system 1 set of low-power GPRS wireless data acquisition server software

 1.3 Standard measurement status

Use a battery-powered sewer flow meter to measure once every 20 minutes, and each measurement time is less than 1 minute. The wireless transmitter uploads data every 120 minutes (a total of 6 measurements were taken during this period.)

In this measurement state, the effective working time of the battery is 3-4 months.

 Externally powered sewer flow meter, real-time measurement.

1.4 Web server software and hardware requirements

The first type: the received data is within 30 points.

    1. The operating system of the server is Windows 7 32-bit or Windows 7 64-bit version.

2. If the server is the broadband of China Unicom and China Telecom, the bandwidth is above 4M, and the communication is good.

3. Server hardware requirements: CPU is Intel or AMD dual-core 2GHz or more, total memory is 4GB (1GB remaining), hard disk has at least two partitions (remaining space of each partition is more than 10GB), display is minimum 17-inch LCD (resolution 1024×768) 80Hz).

4. At the site where the flowmeter is installed, the signal of Unicom or phone is good, and there is no electromagnetic interference.

 The second type: the received data is between 31-200 points.

    1. The operating system of the server is Windows 7 32-bit or Windows 7 64-bit version.

2. If the server is the broadband of China Unicom and China Telecom, the bandwidth is above 10M, the communication is good, and the network is unobstructed.

3. Server hardware requirements: CPU is Intel or AMD dual-core 3GHz or more, total memory is 4GB (remaining 2GB), hard disk has at least two partitions (the remaining space of each partition is more than 30GB), and the display is a minimum of 17-inch LCD (resolution 1024×768) 80Hz).

4. At the site where the flowmeter is installed, the signal of Unicom or phone is good, and there is no electromagnetic interference.

1.5 Composition of battery-powered products

Figure 1.5.1 Composition diagram of sewer flow meter (battery-powered type)

2. Product installation

2.1 Sensor installation

Most of the sewer pipes are standard round, and a few are rectangular or trapezoidal.

Figure 2.1.1 Horizontal pipes of rainwater wells in urban sewers

Figure 2.1.2 Sewage wells in urban sewers

In the sewer, if there is no sediment, we install the sensor in the center of the bottom of the pipe. If there is sediment, install the sensor next to the sediment. In order to prevent the water flow from impacting the installation position of the sensor, there is a base at the bottom of the sensor, which is specially used to fix it on the pipeline. At the same time, the sensor should be installed in the sewer close to the manhole, which is not only easy to install, but also conducive to maintenance and replacement.

 Figure 2.1.3 Installation position of the pipeline with sediment

Figure 2.1.4 Installation position of the sediment-free pipeline

Figure 2.1.5 Installation site of sediment-free pipeline

Figure 2.1.6 Installation site of pipeline with sediment

 2.2 Installation of transmitter and battery box

The transmitter is generally made of cast aluminum housing and reaches IP68 protection level. The installation location is generally selected on the inner wall of the manhole closest to the sensor, and the distance from the manhole cover on the ground should be within 15cm. The battery box is within 40cm near the transmitter and is also fixed on the vertical manhole wall.

Figure 2.2.1 Installation position of transmitter and battery box

Four, server software

4.1 Server software function

   The server software can receive the water level, temperature, and flow rate information sent by the on-site sewer sensor, display it on the screen and save it, and at the same time can calculate the on-site flow rate from the above data.

Figure 4.1.1 Field flow rate, water level and other data displayed by the background server software

 Applications:

      Mainly used in sewage plants, water plants, mines, water conservancy, power plants, chemical plants, steel plants, smart water projects, various monitoring projects of geological disasters, municipal projects, sponge city projects, urban inland river governance projects, hydrology, water conservancy informatization construction Projects and other industries, scientific and reasonable management system and sound quality control system, realize product traceability management, help product safe and efficient operation, won the China National Chemical Corporation, Harbin Institute of Technology, Baosteel Group, China State Construction Group, COFCO, The trust of representative users in the industry, such as Hengan Group, has accumulated rich experience in on-site disposal of instrument products in various fields.

Fuzhou Hengfengtai Automation Equipment Co., Ltd. focuses on the automation instrument industry and is a modern high-tech enterprise specializing in the research and development, design, manufacturing and sales of industrial instruments. The company has a high-quality professional staff team including R&D team, production team and service team. All products of the company rely on professional technology, standardized manufacturing system, high-precision calibration device and perfect production line to ensure the reliability and supply in production. Timeliness. The instrument adopts foam packaging to ensure zero damage during transportation. The product warranty period is 12 months, lifelong maintenance, and free upgrades. We serve our customers with high-quality products, strong technical force and perfect after-sales service. Main business: liquid level gauge series, pressure transmitter series, flowmeter series; ultrasonic level gauge, radar level gauge, liquid level difference gauge, open channel flowmeter, sludge interface instrument, Doppler flowmeter, non-full Tube flow meters, ultrasonic sensors, transducers and other products provide users with customized development of non-standard products. Application areas: sewage plants, water plants, mining, water conservancy, power plants, chemical plants, steel plants, printing machinery manufacturing plants, municipalities and other industries , Scientific and reasonable management system and sound quality control system, realize product traceability management, and help product safe and efficient operation, won the China National Chemical Corporation, Harbin Institute of Technology, Baosteel Group, China State Construction Group, COFCO Group, Hengan Group, etc. With the trust of representative users in the industry, we have accumulated rich experience in on-site disposal of instrument products in various fields.  The company continues to introduce innovative products with independent intellectual property rights to meet the needs of the market and the majority of users, and strive to independently research and develop products to occupy a leading position in the domestic and international markets. Regarding "user satisfaction" as a promise to users, while doing our utmost to meet the various needs of users, it also provides users with personalized services and comprehensive technical support, turning users' ideas and needs into reality.  The company adheres to the talent concept of "growth and brilliance together", promotes humane and transparent management, provides employees with a good working environment and generous salary and benefits, and plans a sound development and promotion channel.  The company's meritocracy talent strategy and broad development space will create a colorful stage for truly capable employees to realize their value in life! We sincerely look forward to your joining!In order to keep technology idle, the company does not increase investment in scientific research, insists on people-oriented, with "leading technology" as the core concept. The laser power supply and Q driver independently developed by the company have reached the international advanced level.The company always adheres to the service tenet of "service for market, quality for survival, innovation for progress, and technology for development", adhering to the corporate spirit of "unity, hard work, truth-seeking, and innovation", and firmly believes in the management of "quality creates strength, professionalism builds the future" The concept is to provide humanized laser solutions tailored to different industries and different needs in an all-round way.The company has a complete after-sales service system, lifetime maintenance for the products sold, nationwide warranty, and provides lifetime free software upgrade services. In addition to technical support for laser marking and engraving for our customers, the company also arranges engineers to inspect and maintain equipment free of charge from time to time, and provide round-the-clock service for the equipment sold. Pursue excellence and strive for perfection!
Similar Product Recommend