Welcome Customer !

Membership

XwbooInstrumentationTesting MachineOther Testing MachinesSf6 Gas Analyzer
  • $item.Title
  • $item.Title

Sf6 Gas Analyzer

Wuhan Goldhome Hipot Electrical Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Other Testing Machines
Place of Origin
HuBei, WuHan
HM3010 SF6 gas analyzer is a high-precision intelligent instrument for measuring trace moisture content in SF6 gas. The self-locking joint of the instrument adopts the self-locking joint imported from Germany, which is safe and reliable without air leakage.
Product overview


HM3010 SF6 gas analyzer is a high-precision intelligent instrument for measuring trace moisture content in SF6 gas. The self-locking joint of the instrument adopts the self-locking joint imported from Germany, which is safe and reliable without air leakage.


Technical feature


1.Portable design: The instrument is lighter, easy to carry and use.

2.Fast measurement: No need to wait after the instrument is turned on, measure immediately and get the humidity value quickly.

3.Fast gas saving: Gas consumption is only about 2L (101.2kPa) during measurement.

4.Self-locking joints: The self-locking joints imported from Germany are used, which are safe and reliable without air leakage.

5.Data storage: adopts large-capacity design and can store up to 50 sets of test data.

6. Clear display: The LCD screen directly displays the dew point, micro water (ppm), ambient temperature, ambient humidity, time and date, battery power, etc.

7.RS232 interface: It can be connected to a serial printer for data printing.

8.Built-in power supply: Built-in large-capacity rechargeable lithium battery, which can work continuously for 10 hours after a full charge.


Parameter table


Dew point

Measurement range

-60 ℃~+20 ℃

Measurement Accuracy

±2℃(-60℃~+20℃)

Measurement time

<3min.

Temperature

-40℃~+60℃

Humidity

0~100% RH

Power

AC 220V

Built-in rechargeable battery

Weight

3kg

Size

250×100×300mm3

Operating temperature

-30℃~+50℃


1


Measurement methods


1. Connect SF6 equipment

Connect the threaded end of the measuring pipe to the switch connector, tighten it with a wrench, and close the needle valve on the other end of the measuring pipe;

Then insert one end of the quick connector on the test pipe into the sampling port on the micro water meter;

Connect the exhaust pipe to the air outlet.

Finally, connect the switch connector to the SF6 electrical equipment measurement interface, and tighten it with a wrench;

2. Check the battery

It is recommended to use AC power first.

When using DC power, please check the battery power displayed in the upper right corner. If the power is less than about 20%, please turn off the battery and continue to use it after charging.

3. Start measuring

First open all the needle valves on the measuring pipe of the instrument, and then use the flow valve on the panel to adjust the flow, adjust the flow to about 0.5L/M, and start measuring the SF6 dew point.

The measurement time of the first device takes 5-10 minutes, and each device thereafter takes 3-5 minutes.

4. Store data

After the equipment measurement is completed, you can save the data in the instrument and press the "OK" key to call up the operation menu. For specific operation methods, see the next section.

5. Measure other equipment

After a piece of equipment measures, close the needle valve on the measuring pipe and the regulating valve on the micro water meter. Remove the adapter from the SF6 electrical equipment. If you need to continue to measure other devices, follow the steps above to continue to measure the next device.

6. End of measurement

After the measurement of all equipment is finished, turn off the power of the micro water meter.


Precautions


If you are using this product for the first time, please note the following:

1.To start the measurement, first open all the needle valves on the measuring pipe of the instrument, and then adjust the flow with the flow valve on the panel. When the measurement is over, the operation is reversed.

2.When the micro-water meter is not used for a long time, there will be some air left in the test pipe and air chamber. Therefore, in the first test, the high humidity gas in it will affect the test speed, because the tested SF6 gas needs to reach saturation. First take away the moisture in the air. So we will find that when testing the second SF6 electrical equipment and the measurement speed will be very fast (3-5 minutes).

similar product-water cooled insulation tester

  Wuhan Goldhome Hi pot Electrical Co.,ltd(short for Goldhome Hi pot) was established in 2008, its predecessor was state-owned third industry enterprises, one of the earliest enterprises specially in develop, design and manufacture high voltage testing equipment in China.In 2016, merged with Wuhan Sang Electric Co., Ltd. , we realize advantageous compartmentalize and resources reorganization.Now it has become a high-tech enterprise integrating R&D, production, marketing installation and commissioning.1.our-historyOur FactoryGoldhome Hi pot is located in Huading Mould Industrial Park, Economic and Technical Development Zone, Wuhan City, Hubei Province, China, working area more than 4000 square meters.As a high-tech enterprise, we are supported by natural advantages from various research universities in Wuhan city. Goldhome Hi pot works closely with professors from State Grid Power Science Research Institute, Electrical Engineering Colleges of Wuhan University and other scientific research institutions, constantly improving technology and updating products . Now Goldhome Hi pot has more than 20 patented technologies, and many software Copyrights!2.our factory-1product and product applicationOur ProductOur advantage products included AC Resonant Test System, PD Free Test System, AC/DC Hi pot Tester, Primary Current Injection, VLF Hi pot Tester, transformer tester,impulse generator,Transformer oil tester,HV Switch gear Tester ,Insulation Tester,ground Resistance Tester,cable fault locator,relay test set,CT PT analyse,arr ester tester and sf6 gas analyzer,etc.Product ApplicationAll the performance indexes of above testing equipment can reach the leading level in China, widely used in power supply bureau, power plant, power construction, railway, petroleum, chemical industry, metallurgy, coal and other industries.In recent years,our factory continues to expand overseas markets, some competitive products are already exported to American and European countries, Africa, Middle East, etc , and well praised by customers.product applicationOur CertificateAll product process is strictly in accordance with international standards and power industry regulations. And the products are through the national, provincial power authorities testing, as well as CE certification! At present,0ur company has received ISO9001:2015 quality management system certification, ISO14001:2018 occupational health and safety management system certification, and ISO14001:2015 environmental management system certification,and also had got SGS certification.We has more than 20 patented technologies,such as The utility model patent of a frequency conversion series resonance test device,The utility model patent of Lightning impulse voltage testing equipment,The utility model patent of DC high voltage generator,The utility model patent of microcomputer relay protection tester,The utility model patent of High voltage switching characteristic tester., etc.4.certificateoverseas market & our serviceOverseas MarketOur products are sold to Europe, Asia, Africa, North and South America and Oceania, Middle East, etc.and are well received by customers.We had won the bids for the purchase of high-voltage no-partial discharge test equipment from the Polish state-owned insulator production plant, the Myanmar National Grid cable fault tester purchase project, and the high-voltage test equipment purchase project of a Russian power installation and test engineering company.We also sell to end customers, and a single device can also be sold. For example, there are power maintenance and installation companies in Indonesia, South Africa, Denmark, and South Korea, and universities and research institutions purchase and use our test equipment.At the same time, our sales targets also include agencies. At present, we already have cooperated with agents in Singapore, Israel, Mauritius , etc.We insist on providing customers with first-class products and first-class services with reliable product quality and perfect service team.5market-1Our service1.Strict factory testAll products will be assembled and test strictly accord with our product process standard. All qualified products will be issued factory release reports and certificate labels.Defect products or non-qualified products won’t be allowed to make deliver.2.Providing technical materialsDuring the product acceptance, we provide the related manual sheets, packing list,qualified certificate labels, factory test reports and other technical documents.3. Support technical guidanceWe also provide the training for the operators. Complete training includes the skilled operations of our equipment, maintenance and troubleshooting . it also ranges the commissioning and test of our products at site!After-sale service1.First-use responsibility systemAfter the product is delivered, the technician can guide the operation at site if the client requires, and be responsible for the first use of each part2.One year warrantyAll products warranty is 1year, life-time maintenance .During the warranty period, if any defects or damaged because of product’s quality, maintenance or replacement can be provided with free charge in order to let our client’s satisfied !3.TroubleshootingIf the troubleshooting is not difficult, and client can handle with it by themselves, we can offer the call-on line guide within 1 hour!If the troubleshooting is difficult to handle with for client, we can promise that the best solution can be provided within 24 hours!
Similar Product Recommend