Membership
Help
Wuhan Goldhome Hipot Electrical Co., Ltd.
Wuhan Goldhome Hipot Electrical Co., Ltd.
| Product summary |
SF6 gas purity analyzer is mainly used to measure the purity of SF6 gas in SF6/air and SF6/N 2 mixed gas. The analyzer has a battery charging indicator and a built-in charger. The detection component can quickly and accurately measure the purity of SF6.
This Sf6 Gas Purity Analyzer is widely used to check the purity of SF6 gas in SF6 equipment (cables, switches).
| Technical characteristics |
1. Long-life detection components
2. High precision and good repeatability
3. Built-in regulator valve and electronic mass flow meter
4. Super large LCD graphic display
5. Lightweight, portable and easy to use
6. Rechargeable battery power supply, AC and DC dual purpose
7. Fast response, almost no warm-up waiting
8. The measurement result is not affected by environment and temperature
| Technical Parameters |
Range | 0~100% SF6 |
Accuracy and repeatability | Typical accuracy±0.5%(Within a certain range),Has nothing to do with traffic |
Response time | 60%——20s;90%——45s |
Sampling | Built-in pressure regulator valve, filter, flow meter, 3.6m sampling tube and a pressure relief valve connector |
Operating temperature | -3 0℃to +50℃(Best accuracy) |
Power | DC:Built-in lithium battery; AC:220V/50Hz |
Reading | Large LCD graphic display |
Size | 250(mm)×100(mm)×300(mm) |
Weight | About 3kg |
Output interface | RS232 interface,Can be connected to a serial printer for data printing |
Sampling flow | 0.5~1.0L/min |
| Matters needing attention |
1.The Sf6 Gas Purity Analyzer should be placed in a safe place to prevent it from being broken and avoid violent vibration;
2.Do not measure corrosive gases;
3.When adjusting the gas flow, the flow valve should be opened slowly so that the flow indication is about 0.2 liters/min;
4.Before using the instrument, it should be charged in time. When charging, you only need to connect the power cord to the 220V socket without turning on the power switch. The instrument will automatically charge.

| FAQ |
1.How long is your delivery time ?
It depends on you product.
Conventional products we have it in stock,it can be delivery within 3-5 working days
customized product can be delivery within 10-15 working days.
2.Do you accept OEM order ?
Yes, OEM & ODM are acceptable.
3.What about leading time for production ?
Usually , it depends on our production situation and the required model’s specification . Usually lead time is within 7 working days after deposit,customized model should be negotiated again!
4.When can I get the price ?
The quotation can be provided within 6hours . If you are very urgent, pls info@cablehipot.com, or call .
5.What is your terms of delivery ?
We accept EXW, FOB, CFR, CIF, DDU, DDP etc . You can choose the most convenient and cost effective terms for you .
6.How much is the shipping cost and logistic time ?
This is depend on the size and weight of your product, and the method of shipping ( by sea/ by ari/ by Express) and your designated port . Kindly afford us above information to check shipping cost and lostic time for you .
7.Can you provide the product calibration certificate?
Yes, we can issue our factory calibration certificate.
If you require the third-party calibration certificate, it also can be made,just if through the third party, it will be charged!