Welcome Customer !

Membership

XwbooInstrumentationTesting MachineTransformer Testing MachineSfra Test Equipment
  • $item.Title
  • $item.Title

Sfra Test Equipment

Wuhan Goldhome Hipot Electrical Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Transformer Testing Machine
Place of Origin
HuBei, WuHan
Linear sweep:0.5KHZ-1MHZ interval 0.5KHZ 2000 dotsSection sweep:50HZ-100HZ interval 2HZ 25 dots100HZ-1KHZ interval 20HZ 45 dots1KHZ -10KHZ interval 50HZ 180 dots10KHZ-100KHZ interval 0.2KHZ 450 dots 100KHZ – 500KHZ interval 0.5KHZ 800 dots500KHZ – 1000KHZ interval 1KHZ 500 dots

HM5010 Sfra Test Equipment


Brief Introduction


The Sfra Test Equipment (transformer winding deformation tester) adopts the internal fault frequency response analysis (FRA) method based on the measurement of the characteristic parameters of the internal winding of the transformer, which can make accurate judgments on the internal fault of the transformer.

The Sfra Test Equipment is to quantify the response changes of the internal winding parameters of the transformer in different frequency domains, and determine the internal windings of the transformer according to the magnitude of the change, the amplitude of the frequency response change, the area and the trend of the frequency response change According to the measurement results, it can be judged whether the transformer has been severely damaged and whether it needs to be overhauled.

Our Sfra Test Equipment is composed of a notebook computer and a single-chip microcomputer with a high-precision measurement system.


Please do not start the winding deformation test before the measurement grounding of the transformer is connected correctly.

The terminal of the transformer under test should be fully discharged before the test.

The winding deformation test should be carried out under the premise of unfastening all the leads of the transformer (including overhead wires, enclosed bus bars and cables), and keep these leads as far away from the transformer bushing as possible (the surrounding grounding body and metal suspension should be more than 20cm away from the transformer bushing ), especially the transformer connected to the closed bus.



Main Features



1.Adopt high speed and high integration microprocessor.

2.USB interface for communication with computer

3.Adopt DDS digital high - speed frequency sweep technology

4.High speed dual channel 16 bit A/D sampling

5.The amplitude of signal output cab be adjusted by software, and the maximum peak value is ±10V.

6.The computer can automatically analyze the data and generate test report in word foramt.

7.Built in printer

Hot tags: Transformer Sweep Frequency Response Analyzer, Winding Deformation Tester.


Technical Specificaiton



1.Two different sweep modes: Linear sweep,Section sweep;

Linear sweep:

0.5KHZ-1MHZ interval 0.5KHZ 2000 dots

Section sweep:

50HZ-100HZ interval 2HZ 25 dots

100HZ-1KHZ interval 20HZ 45 dots

1KHZ -10KHZ interval 50HZ 180 dots

10KHZ-100KHZ interval 0.2KHZ 450 dots

100KHZ – 500KHZ interval 0.5KHZ 800 dots

500KHZ – 1000KHZ interval 1KHZ 500 dots

2.Test range:(-100dB) - (+20dB)

3.Test accuracy: 0.1dB;

4.Frequency accuracy:<0.01%

5.Signal input impedance:>1M Ω

6.Signal output impedance:50 Ω


F. A. Q



1. Are you manufacturer or trading company ?

We are ISO certified manufacturer .


2. When can I get price ?

Within 24 hours after get your inquiry .


3. Do you supply OEM?

Yeah, OEM is available .


4. How long it will take for production ?

Usually around 10-15 days .


5. What is your terms of delivery ?

EXW, FOB, CFR, CIF, DDU, etc .


6. What’s your payment terms :

TT , L/C , Paypal, Western union, etc.


7. How much is the shipping cost and time ?

Depend on transporting modes and destination .


8. How about the warranty ?

One year free and lifelong maintenance .


9. Can you afford calibration certificate ?

Yes , we can afford calibration certificate issued by third authoritative institution .


10. Do you have Technical Backup to all customers from different countries ?

Sure, we have rich-experienced engineer service you within 24 hours through phone call , ,or on-line communication to solve your problems . And if if necessary , our engineer can visit your company to afford technical support face to face .


Company profile



Wuhan Goldhome Hipot Electrical Co.,ltd is one of the earliest ISO certified enterprises specially in develop, design and manufacture high-voltage testing equipment in China.

Goldhome hipot main products included AC/DC hipot tester, transformer testing device, CT/PT analyzer , Circuit breaker tester, insulation resistance tester set , earth continuity tester, protection relay tester as well as transformer oil testing equipment.

Goldhome Hipot always stick to conception of "credit is the basis, quality is the first" , provide high quality products and perfect after-sales service for customers at home and abroad.


1


  Wuhan Goldhome Hi pot Electrical Co.,ltd(short for Goldhome Hi pot) was established in 2008, its predecessor was state-owned third industry enterprises, one of the earliest enterprises specially in develop, design and manufacture high voltage testing equipment in China.In 2016, merged with Wuhan Sang Electric Co., Ltd. , we realize advantageous compartmentalize and resources reorganization.Now it has become a high-tech enterprise integrating R&D, production, marketing installation and commissioning.1.our-historyOur FactoryGoldhome Hi pot is located in Huading Mould Industrial Park, Economic and Technical Development Zone, Wuhan City, Hubei Province, China, working area more than 4000 square meters.As a high-tech enterprise, we are supported by natural advantages from various research universities in Wuhan city. Goldhome Hi pot works closely with professors from State Grid Power Science Research Institute, Electrical Engineering Colleges of Wuhan University and other scientific research institutions, constantly improving technology and updating products . Now Goldhome Hi pot has more than 20 patented technologies, and many software Copyrights!2.our factory-1product and product applicationOur ProductOur advantage products included AC Resonant Test System, PD Free Test System, AC/DC Hi pot Tester, Primary Current Injection, VLF Hi pot Tester, transformer tester,impulse generator,Transformer oil tester,HV Switch gear Tester ,Insulation Tester,ground Resistance Tester,cable fault locator,relay test set,CT PT analyse,arr ester tester and sf6 gas analyzer,etc.Product ApplicationAll the performance indexes of above testing equipment can reach the leading level in China, widely used in power supply bureau, power plant, power construction, railway, petroleum, chemical industry, metallurgy, coal and other industries.In recent years,our factory continues to expand overseas markets, some competitive products are already exported to American and European countries, Africa, Middle East, etc , and well praised by customers.product applicationOur CertificateAll product process is strictly in accordance with international standards and power industry regulations. And the products are through the national, provincial power authorities testing, as well as CE certification! At present,0ur company has received ISO9001:2015 quality management system certification, ISO14001:2018 occupational health and safety management system certification, and ISO14001:2015 environmental management system certification,and also had got SGS certification.We has more than 20 patented technologies,such as The utility model patent of a frequency conversion series resonance test device,The utility model patent of Lightning impulse voltage testing equipment,The utility model patent of DC high voltage generator,The utility model patent of microcomputer relay protection tester,The utility model patent of High voltage switching characteristic tester., etc.4.certificateoverseas market & our serviceOverseas MarketOur products are sold to Europe, Asia, Africa, North and South America and Oceania, Middle East, etc.and are well received by customers.We had won the bids for the purchase of high-voltage no-partial discharge test equipment from the Polish state-owned insulator production plant, the Myanmar National Grid cable fault tester purchase project, and the high-voltage test equipment purchase project of a Russian power installation and test engineering company.We also sell to end customers, and a single device can also be sold. For example, there are power maintenance and installation companies in Indonesia, South Africa, Denmark, and South Korea, and universities and research institutions purchase and use our test equipment.At the same time, our sales targets also include agencies. At present, we already have cooperated with agents in Singapore, Israel, Mauritius , etc.We insist on providing customers with first-class products and first-class services with reliable product quality and perfect service team.5market-1Our service1.Strict factory testAll products will be assembled and test strictly accord with our product process standard. All qualified products will be issued factory release reports and certificate labels.Defect products or non-qualified products won’t be allowed to make deliver.2.Providing technical materialsDuring the product acceptance, we provide the related manual sheets, packing list,qualified certificate labels, factory test reports and other technical documents.3. Support technical guidanceWe also provide the training for the operators. Complete training includes the skilled operations of our equipment, maintenance and troubleshooting . it also ranges the commissioning and test of our products at site!After-sale service1.First-use responsibility systemAfter the product is delivered, the technician can guide the operation at site if the client requires, and be responsible for the first use of each part2.One year warrantyAll products warranty is 1year, life-time maintenance .During the warranty period, if any defects or damaged because of product’s quality, maintenance or replacement can be provided with free charge in order to let our client’s satisfied !3.TroubleshootingIf the troubleshooting is not difficult, and client can handle with it by themselves, we can offer the call-on line guide within 1 hour!If the troubleshooting is difficult to handle with for client, we can promise that the best solution can be provided within 24 hours!
Similar Product Recommend