Membership
Help
Sunrise Mechatronic Technology Co., Ltd
Sunrise Mechatronic Technology Co., Ltd
Overview
This is very fast steel rod shearing machine which is used for forging shod shearing widely. Comparing with conventional machine, it is almost 10 times higher and save much costs.
Machine Application:
Machine Feature
Adopt automatic feeding rack, no need of manual feeding and pushing, save time and effort and cost
Made of reinforced gear alloy steel, specification heat treatment, high transmission torque
The crankshaft is made of alloy steel with high rigidity and high fatigue strength
Professional bimetal sliding guide, wear resistance, good durability
Automatic lubricating oil pump for guide rail, automatic alarm when oil is cut off
Reasonable design of material retaining mechanism makes the cutting size accurate and easy to adjust
The use of enclosed gear box, gear bearing immersion oil, lubrication reliable
The design of total retaining material makes the cutting size more accurate, the weight deviation smaller and the section evenness higher
Configuration
1. Automatic feeding system:
Non-impact feeding system is adopted to the feeding roller table.
2. Automatic feeding system:
Roller feeding, stable and reliable transmission.
3. Automatic lubrication system:
In order to improve the service life of the equipment, the system plays a vital role.
4. Automatic lubrication system
Can realize automatic timing, fixed point, quantitative lubrication.
5. Automatic clamping center system:
The device can automatically clamp the incoming material, and automatically clamp the center of the die cavity.
Item | Parameter | Remarks | |
Max shearing diameter | Φ50mm | 45# carbon steel for example | |
Max shearing speed | 50 times/min | | |
Stop distance | 30-300mm | customzied | |
End roundness | 0.95 | 45# carbon steel for example | |
Shearing weight tolerance | ≤200g | ≤±1g | |
≥200g | ≤±0.5% | ||
Main power | 7.5kw | | |
Machine weight | 3500kg | | |
Feeder speed | 250mm/s | |
Safe shearing list for different material:
NO. | Material | Max shearing dia | Remarks |
1 | 45# | 50mm | Cold draw round steel shearing performance will be less around 20% |
2 | Q235 | 50mm | |
3 | 35# | 50mm | |
4 | 20Cr | 40mm | |
5 | 40Cr | 38mm | |
6 | 20CrMnTi | 40mm | |
7 | 42CrMo | 32mm | |
8 | 60crv | 26mm |