Membership
Help
Shanghai Suote Valve Co., Ltd.
Shanghai Suote Valve Co., Ltd.
Our employees are skilled at utilizing state-of-the-art technologies.In the application field(s) of Control Valve, Non-Modulating Float-Control Valve is widely used and highly recognized by users. Technological innovation is the fundamental reason for Shanghai Suote Valve Co.,Ltd. to achieve sustainable development. Shanghai Suote Valve Co.,Ltd. will strive toward excellence by building our working principles of guaranteeing quality for survival and seeking innovation for development, into everything we deliver. We are confident that we will overcome all the difficulties and obstacles to make a success in the end.
| No. | Part | Material | China stardard |
| 1 | body | Ductile iron | EN-JS1040 |
| 2 | Seat ring | Stainless steel | AISI 304 |
| 3 | O-ring | Rubber | NBR |
| 4 | O-ring | Rubber | NBR |
| 5 | Screw bolt | Stainless steel | A2 |
| 6 | Gasket | Stainless steel | A2 |
| 7 | bonnet | Ductile iron | EN-JS1040 |
| 8 | Shaft Sleeve | Lead Brass | CZ 122 |
| 9 | Spring | Stainless steel | AISI 304 |
| 10 | Nut | Stainless steel | A2 |
| 11 | Diaphragm | Rubber | NBR |
| 12 | Diaphragm pressure plate | Ductile iron | EN-JS1040 |
| 13 | Hinge Pin | Stainless steel | AISI 304 |
| 14 | Yoke | Ductile iron | EN-JS1040 |
| 15 | Seal Ring | Rubber | NBR |
| 16 | Guide plate | Stainless steel | AISI 304 |
| 17 | Stem | Stainless steel | AISI 304 |
| I8 | Plug | Stainless steel | AISI 304 |
| DN | L | B | H | D | PN10 | PN16 | PN25 | N.W. kg |
| 50 | 230 | 173 | 232 | 85 | 4-019 | 14 | ||
| 65 | 290 | 197 | 259 | 95 | 4-019 | 4-019 | 8-019 | 19 |
| 80 | 310 | 224 | 279 | 102 | 8-019 | 8-019 | 8-019 | 23 |
| 100 | 350 | 265 | 305 | 120 | 8-019 | 8-019 | 8-023 | 32 |
| 150 | 480 | 352 | 445 | 152 | 8-023 | 8-023 | 8-028 | 68 |
| 200 | 600 | 436 | 569 | 182 | 8-023 | 12-023 | 12-028 | 112 |
| 250 | 730 | 518 | 611 | 212 | 12-023 | 12-028 | 12-031 | 178 |
| 300 | 850 | 600 | 659 | 242 | 12-023 | 12-028 | 16-031 | 225 |
| DN | L | ØD | ØK | H | N-Ød | ||||||
| PN10 | PN16 | PN25 | PN10 | PN16 | PN25 | PN10 | PN16 | PN25 | |||
| 400 | 1100 | 565 | 580 | 620 | 515 | 525 | 550 | 813 | 16-028 | 16-031 | 16-037 |
| 450 | 1100 | 615 | 640 | 670 | 565 | 585 | 600 | 813 | 20-028 | 20-031 | 20-037 |
| 5CO | 1250 | 670 | 715 | 730 | 620 | 650 | 660 | 967 | 20-028 | 20-034 | 20-037 |
| 6CO | 1450 | 780 | 840 | 845 | 725 | 770 | 770 | 1140 | 20-031 | 20-037 | 20-040 |
| 700 | 1450 | 895 | 910 | 960 | 840 | 840 | 875 | 1140 | 24-031 | 24-037 | 24-043 |
| Design standard | CJ/T219, JB/T10674 | |
| Connection standard | GB/T17241.6 | |
| Face spacing standard | GB/T12221 | |
| Inspection testing standard | GB/T13927 | |
| Nominal diameter | DN50~DN600(2"~24") PN10 DN50~DN600(2"~24") PN16 DN50~DN200(2"~8") PN25 | |
| Nominal pressure | 0.1MPa-0.8MPa 0.8MPa-1.3MPa 1.3MPa-2.0MPa | |
| Operating temperature | -10°C~85°C | |
| Seal test | 1.1PN | |
| Shell test | 1.5PN | |
| Suitable medium | Water | |




