Welcome Customer !

Membership

XwbooInstrumentationLevel InstrumentCapacitance Level MeterSIN-RD702 Guided wave radar level meter
  • $item.Title
  • $item.Title

SIN-RD702 Guided wave radar level meter

Sinomeasure Automation Technology Co,Ltd

Model
Nature of the Manufacturer
Other
Product Category
Capacitance Level Meter
Place of Origin
,
Category: Radar level meter Views: 759 Applications: SIN-RD702 Guided wave radar for level measurement in liquids and bulk solids. In level measurement with guided wave radar, microwave pulses are conducted along a cable or rod probe and reflected by the product surface. PTFE antenna, suitable for corrosive medium measurement.
Product Guided wave radar level meter
ModelSIN-RD702
Measure range0-20 meters
Application

Acid, alkali, other corrosive media

Process ConnectionFlange
Medium Temperature-40℃~130℃
Process Pressure -0.1 ~ 0.3MPa
Accuracy±10mm
Protection GradeIP67
Frequency Range500MHz-1.8GHz
Signal Output4-20mA (Two-wire/Four)
RS485/Modbus
Power supplyDC(6~24V)/ Four-wire
DC 24V / Two-wire


Introduction


SIN-RD702 guide wave radar level meter can launch high frequency micro-waves which transmits along with probe.


Product Size



Installation guide


H----Measuring range

L----Empty tank height

B----Blind area

E----Minimum distance from probe to tank wall >50mm

Note:

The top Blind area refers to the minimum distance between the highest material surface of the material and the measurement reference point.

Blind area at the bottom refers to a distance that cannot be accurately measured near the bottom of the cable.

The effective measurement distance is between the top Blind area and the bottom Blind area.



Product Guided wave radar level meter
ModelSIN-RD702
Measure range0-20 meters
Application

Acid, alkali, other corrosive media

Process ConnectionFlange
Medium Temperature-40℃~130℃
Process Pressure -0.1 ~ 0.3MPa
Accuracy±10mm
Protection GradeIP67
Frequency Range500MHz-1.8GHz
Signal Output4-20mA (Two-wire/Four)
RS485/Modbus
Power supplyDC(6~24V)/ Four-wire
DC 24V / Two-wire





Installation guide


H----Measuring range

L----Empty tank height

B----Blind area

E----Minimum distance from probe to tank wall >50mm

Note:

The top Blind area refers to the minimum distance between the highest material surface of the material and the measurement reference point.

Blind area at the bottom refers to a distance that cannot be accurately measured near the bottom of the cable.

The effective measurement distance is between the top Blind area and the bottom Blind area.



Sinomeasure Automation Technology Co,Ltd. is specialized in manufacturingelectrochemical sensors and meters for industry water analysis for over 15years.We provide water analytical Instruments for pH, conductivity,resistance, turbidity, TDS, DO etc.Our well-equipped facilities and excellentquality control throughout all stages of production enables us to guaranteetotal customer satisfaction. It is believed that after such a long accumulationof years,our professional ability in the water treatment industry will alsoprovide better technical support to our partners.
Similar Product Recommend