Membership
Help
Jinan Focor Machinery Co.,Ltd
Jinan Focor Machinery Co.,Ltd
| Brief Introduction |
Name: single boom jumbo
Model: FK10-1BCDL
Power of Diesel engine: 50 KW
Power of Electric motor: 42.5 KW
Section (b×h): 2×2~3.5×3.5 m
Dimensions: 8300×1350×2650 mm
| Product Introduction |
Main features of FK10-1BCDL single boom jumbo:
(1) It is mainly used to drill blast holes for tunneling constructions in mining, metallurgy, water and electricity, railway, highway engineering;
(2) It has advanced hydraulically controlled drilling system, which is safe and simple to operate, incorporates the auto stop and anti-jamming function, auto-stop at end-point, auto wash.
(3) This jumbo has a small body, runs with the wheels, can reach a speed of 20km/h Working with electric motor can improve the working environment, reduces noise, dust and energy consumption.
(4) The jumbo can not only drill blast hole, according to the the basis of section, it also can drill bolt hole conveniently with our patent impeller.
| Configuration And Technical Parameters |
Item | Parameter | |
Body | Overall size (L×W×H) | 8300×1350×2650 mm |
Hole diameter | φ33~φ102 | |
Drill pipe length | 3050 mm | |
Hole depth | 2.7 m | |
Drilling speed | 0.8~2 m/min | |
Section (W×H) | 2×2~3.5×3.5 m | |
Climbing capability | 14% | |
Total weight | ≈7000 kg | |
Bottom | Min. turning radius | 2500 m |
Running speed | ≤20 km/h | |
Climbing capability | 8° | |
Joint | inner35°, outer35° | |
Up and down | up55°, down16° | |
Rotation angle | positive180°, negative180° | |
Pitching | down105°, up15° | |
Compensation | 1500 mm | |
Thruster | Pitching | down105°, up15° |
Swing angle | inner45°, outer45° | |
Total length | 4150 mm | |
Hole depth | 2700 mm | |
Max. Propulsion | 9000 N | |
Impact oil pressure | 14~16 MPa | |
Impact flow | 30~45 L/min | |
Torque | 60~260 N·m | |
Impact energy | 100~200 J | |
Impact frequency | 34~67 Hz | |
Rotating speed | 200~400 r/min | |
Hydraulic system | Impacting loop pressure | 16 MPa |
Drill pipe rotation loop pressure | 15 MPa | |
Compensation loop pressure | 10 MPa | |
Boom loop pressure | 20 MPa | |
Propulsion loop pressure | 16 MPa | |
Leg extension loop pressure | 21 MPa | |
Running loop pressure | 20 MPa | |
Air system | Tank air pressure | 0.03 MPa |
Rock drill air pressure | 0.4 MPa | |
Water system | Rock drill water pressure | (≥)1.2 MPa |
Colder water pressure | (≤)0.6 MPa | |
Electric system | Installed power | 42.5 KW |
Supply voltage | 380 V | |
Electric motor rotation speed | 1470 r/min | |


| Main Features |

| Product Qualification |

| Other Underground Mining Machines We Supply |

| Latest News - Attentions of Single boom jumbo for underground mining |
1. Receive instruction and the machine certificate when buying the jumbo.
2. The driver must read the instructions carefully before operation, then operation, adjustment and maintenance as request.
3. The hydraulic system of the machine is not allowed to adjust the pressure at will.
4. The warranty period of the walking chassis is three months from the date of purchase, warranty for quality problems due to manufacturing. No product certification, warranty card, electrical parts, wearing parts and failure caused by improper used is not within the scope of the warranty.
5. If the jumbo has a mechanical failure, users should inform our company the model, factory number and purchase date.
Important Note
6. In any case, the fuel tank should not be injected into the fuel without filtration, which will cause injector needle wearing and blocking.
7. New jumbo must start normal working after running-in as required.
3. High speed is strictly prohibited when turning or running on the slope.
4. Forbid to travel on a ramp greater than 14°
5. Turning must be on the horizontal ground.
6. The drilling boom should be put on transport station and as low as possible.
7. When passing slope, the drilling boon cannot be swung to one side when passing slope, and no turning. When the slope greater than 5°, the jumbo cannot pass.
8. Strictly forbid more than 1800rmin, it will injure the jumbo!
9. Maintenance or adjustment is strictly prohibited when the jumbo is working.
10. Do not use non-label fuel oil, gear oil or hydraulic oil. Hydraulic oil, engine gear oil, diesel filter element, oil filter element and air filter element must be replaced after the new jumbo working 80-120h.
Precautions
The diesel engine must be used in well ventilated mine and tunnel, to prevent poisonous gases from causing damage to our bodies.