Welcome Customer !

Membership

XwbooMachine Tool AccessoriesMachine Tool Functional PartsMotorSingle Phase 3hp Induction Motor Price

Single Phase 3hp Induction Motor Price

Liyuan Motor Ltd

Model
Nature of the Manufacturer
Other
Product Category
Motor
Place of Origin
,
MY series aluminum housing single phase 3hp induction motor price, with run capacitor, is made of selected quality materials and conform to the IEC standard.

Product Introduction

MY series aluminum housing single phase 3hp induction motor price, with run capacitor, is made of selected quality materials and conform to the IEC standard. MY motors have features of good performance, low noise, little vibration and safety and reliable operation. The multiple of starting torque is 0.3-0.7 (MY), 0.45-0.75 (MYT). MY motors are suitable for the occasion where there requirements of starting torque is low and long-term continuous working, such as home electric appliances, pumps, fans, and recording meters, etc.


Product Detail



Motor Type: single phase 3hp induction motor price

Output Power: 0.06 kW - 3 kW

Frame Size: IEC 56 - 100

Number of Poles: 2 and 4

Voltage: 220V / 230V / 240V (can design based on customers` requirements)

Frequency: 50 or 60 Hz

Protection Level: IP54 or IP55

Insulation Class: B / F

Cooling Method: ICO141

Working Duty: Continuous (S1)


Product Parameter (Specification)



single phase 3hp induction motor price

Type

Power (KW)

Rated Current (A)

Speed (r/min)

Eff (%)

Power Factor CosØ

Rated Torque Tn(N*m)

Tst/Tn

Tmax/Tn

Starting Current (A)

Run Capacitor (uf/V)

3000rpm.2 poles

MY90L-2

2.2

12.6

2810

75

0.97

7.46

0.31

1.81

60

60 uf/450V

1500rpm.4 poles

MY100L1-4

2.2

12.7

1430

77

0.97

14.57

0.26

1.81

60

70 uf/450V


Production Features


image001

Know More Us


image006

Why Us


image008

Service and Packing


image009

About motor



3.2 The rotor core has the same hazards as the stator core due to poor lamination quality: increased no-load current and increased electromagnetic noise. For the wound rotor, there is also the problem of forcing the designer to increase the insulation thickness due to the unstable quality of the core In addition, the following quality problems will occur.

3.2.1 When the quality of the rotor iron core is unstable and a "rhombus" appears, the accuracy of the dynamic balance will be affected, and then the vibration and noise of the motor will increase.

3.2.2 If the inner hole of the punching piece is out of tolerance, for the motor of the wound rotor with a single piece stacked on the shaft, because the tolerance of the shaft does not change (the tolerance value cannot be adjusted continuously with the wear of the mold), the rotor will not change. There is a large gap between the iron core and the shaft. Especially when the punching piece is stacked on the shaft at room temperature, when the rotor heats up and expands under load, the clearance will increase, which will not only contribute to the vibration and noise, but also destroy the coaxiality of the stator and the rotor. , make the air gap uneven, increase the unilateral magnetic pull, and then increase the deflection of the rotor. The "sweep" failure of wound rotor motors is directly related to this.

n or the air inlet and outlet are blocked;

13) The internal wiring of the new motor is incorrect;

14) The star-delta wiring is incorrect;


Our HistoryLiyuan Motor Ltd, founded in 1989, is located in Fuan city, the electric motor town of China. Our company has floor area of 3500 square meters and is a professional manufacturer of small and medium size electric motors, equipped with advanced facilities, advanced production and perfect testing equipments. We are the excellent medium-small size motor manufacturer in China, aiming to provide the highest quality but lowest price to our clients.Our FactoryNow, We have a integrated team of high skilled technicians and professional salesmen with advanced product-development method and modernized management system. In order to manufacture high quality products, we make sure we take strict procedure controls, from “material select”, “machining”, “producing”. “assembling”, and “testing”, on each single part. All of our products are produced by national standard and reach the high level in China. Products is hot sale not only in domestic market also oversea regions such as South-East Asia, Middle Asia etc. Motors are quite welcomed and we received thousands good comments from customers.Our ProductThe main business of the company specially produces the cast-iron electric motor such as Y/Y2/IE2 general motor, YEJ break motor, YVF frequency controlled motor, YD multi-speed motor, YC/YCL/YL single phase motor, YTY pump motor, YLJ break motor etc and alluminum motor such as MS general motor, ML/MC single phase motor as well as brushed DC motor and brushed permanent magnet DC motor.
Similar Product Recommend