Membership
Help
Shanghai sosin Electronics Co., Ltd.
Shanghai sosin Electronics Co., Ltd.
Switching the transient process (to cut off inductive load, relay contact bounce, etc.) usually interferes with other electrical and electronic equipment in the same circuit. This type of interference is characterized by high amplitude, short rise time, high repetition rate and low energy. Pulse generators are used for evaluating the performance of electrical and electronic equipment power supply port, signal, control and grounding ports when subjected to electrical fast transient burst interference.
The EFT S/ T series are the state-of-the-art EFT/ Burst testers with a built-in coupling/ decoupling network for single phase or three-phase mains supply line and a HV terminal to connect a capacitive coupling clamp. Its performance fully complies with IEC 61000-4-4 standard.
u Fully Compliant with latest Standards IEC/ EN 61000-4-4
u User friendly 7” Touch Panel Display
u Support multi-language & facilitate users
u Built-in environment self-test program
u Programmable operation
u Pre-programmed IEC 61000-4-4 test settings
u The highest pulse frequency is up to 1.2MHz
u RS232 interface, PC control operation & printable test report
u Comfortable use and convenient operation
Model EFT S4
Output voltage 0.2~±5kV
Frequency 1kHz~ 1200KHz ± 10%, continuous adjustable
Polarity Positive/ negative/ alternating
Running time 1~ 9999s, continuous adjustable
Internal resistance 50Ω±10%
Pulse rise time 5ns ±30%
Pulse width 50ns ±30% (50Ω load) ; 35ns ~ 150ns(1kΩ load)
Numberof pulses 1 ~ 255, continuous adjustable
Phase 0 ~ 359°synchronous, asynchronous, automatic
Burst period 0.15 ~ 99.9s,continuous adjustable
Coupling/ decoupling network Built-in, single-phase three-line, 16A(Customer specific on demand)
Power supply AC 220V ±10% 50/60Hz
Ambient temperature 15℃ ~ 35℃