Welcome Customer !

Membership

XwbooPaper machineryPapermaking Auxiliary EquipmentSlurry PumpSlurry crushing pump
  • $item.Title
  • $item.Title

Slurry crushing pump

Nantong Fleck Fluid Equipment Co., Ltd.

Model
Nature of the Manufacturer
Other
Product Category
Slurry Pump
Place of Origin
,
Slurry crushing pump

1

Slurry crushing pump is a new type of crushing and refining equipment, which is widely used in various fine chemicals, pharmaceutical and pharmaceutical, food light industry, petrochemical and other alkali residue, slag, dregs, slag, etc. and various residue after filtration. Crushing and refining conveying. This high-efficiency pulverization residue equipment is characterized by advanced technology, multiple functions, high efficiency and energy saving, and crushing and conveying.

All residues entering the slurry pulverizing pump must be fragile crystals, agglomerates, agglomerates, sticks, filter cakes, etc. It is strictly forbidden to enter the pump body with metal materials such as wire nut and stone brick. The solid particle content of the material is ≤30%, and the maximum feed particle of the large-diameter slurry crushing pump is about 100mm. The granules after pulverization and refining are according to user needs. set.

11

Corresponding parameter set not found, please add it in property template of background
ModelProcessing capacity m³/hMotor Power kwImport and export size mmConnection method
ZJB-320.5-2.57.550/32Direct connection
ZJB-402-4.51150/40Direct connection
ZJB-503-71865/50Bearing seat connection
ZJB-655-123080/65Bearing seat connection
ZJB-809-1837100/80Bearing seat connection
ZJB-10014-2845125/100Bearing seat connection
ZJB-12524-3455150/125Bearing seat connection
ZJB-15030-6075175/150Bearing seat connection
ZJB-17540-8095200/175Bearing seat connection

Note: The flow range in the table is the general fine material as the parameter. When the solid content is ≥30% or the solid particle content is too much, please increase the model or motor correspondingly when selecting the type. If the lift is higher than 20 meters or high viscosity, please reduce the 90o elbow. Quantity, or change to 135o elbow, pump port pressure ≤ 0.2PMa.

Slurry crushing pump product features:

(1) It has strong shearing, pulverizing, dispersing, emulsifying and refining conveying functions.

(2) Quiet design, no noise, good dynamic balance, no vibration.

(3) The material of the rotating mill is 304, 316L, 2205, 2Cr13 and wear-resistant alloy steel for nitriding treatment or tungsten carbide treatment.

(4) The gap can be adjusted, the adjustment distance is 0.3~8mm, and the refining particles can be made according to the user's needs.

(5) Sealed optional double-sided water-cooled mechanical seal or single-sided liquid-cooled mechanical seal.

Principle of slurry crushing pump:

The slurry pulverizing pump is designed and manufactured on a special rotating stator to produce a multi-purpose new slurry pump which is combined with a pulverizing and refining conveying by combining a shearing zone, a pulverizing zone, a refining zone and a conveying zone. It is widely used in the crushing and refining of various kinds of residues such as alkali residue, cinder, dregs and slag. During the pulverization process, the residue must be mixed with water or liquid before entering the pulverizing pump through the pipeline. After entering the pump body of the slag pulverizing pump, the cutting blade first cuts, tears, and filters the large particles, and chopped into After the small particles are cut by the conveying impeller, the centrifugal force will be sent to the pulverizing grinding zone. After reaching a certain fineness, the conveying impeller will send the refined slurry out of the pump. The casing of the slurry pulverizing pump is generally made of 304 stainless steel, and the rotating stator is made of wear-resistant high alloy forging and quenching. The plane shear pulverization distance after the combination of the rotating stator is generally 0.3 mm (adjustable between the rotating stators) The distance is (0.3-8mm) and the delivery head can reach 6-20 meters.

All residues entering the slurry pulverizing pump must be fragile crystals, agglomerates, agglomerates, sticks, filter cakes, etc. It is strictly forbidden to enter the pump body with metal materials such as wire nut and stone brick. The solid particle content of the material is ≤30%, and the maximum feed particle of the large-diameter slurry crushing pump is about 100mm. The granules after pulverization and refining are according to user needs. set.

Accessories: Equipment selection parameters and technical requirements (downloadable)

 First, the technical parameters of your company's materials:
Material medium Processing capacity(m³/h)
Liquid category□Water-based, □Oily, □SolventSolid category□Agglomerate, □Crystals, □Primary particle
Liquid to solid ratio(%)      Viscosity Pa.s Material flow□Very good (water), □可以, □difference, □Very poor
Feed containsLarge particles mm,Take up %Medium particle mm,Take up %Small particles mm,Take up %
Solid particles(□fragile, □Not fragile, □Viscous)Discharge granule μmHead mtemperature ℃
Remarks:
 Second, your company's requirements for equipment:
 1. Material contact part material□stainless steel 304, □stainless steel 316L, □Duplex steel 2205, □TA2, □HastelloyC276
 2, rotating stator material□stainless steel 304, □stainless steel 316L, □Duplex steel 2205, □TA2, □Hastelloy C276,
□Wear-resistant steel NM500, □Wear-resistant steel 38CrMoAl, □Tungsten carbide treatment, □Emery treatment
 3, sealed□Ordinary single-sided mechanical seal, □Ordinary double-sided mechanical seal, □Custom double-sided mechanical seal
O-ring configuration□Ding O-ring, □Fluoro rubber O-ring, □Fluorine-containing O-ring, □Perfluoroether O-ring
Material contact surface□Tungsten carbide-silicon carbide, □Tungsten carbide-tungsten carbide, □Silicon carbide-silicon carbide
 4, the motor□Ordinary motor, □Inverter motor, □Ordinary explosion-proof motor, □Explosion-proof inverter motor, □Dust explosion-proof motor
□Class 2 energy efficient motor, □Marine motor, □Waterproof motor□Self-contained control box□With control box
 Third, the corresponding device model:
Full name of the equipmentModelProcessing capacitym³/h)Motor Power(kw)AmountRemarks
other


Fill in the unit:          Fill in the person:          phone:

Daily chemical industry: AES、LAS、AOS、MES、K12、Glycerin, sorbitol, fatty alcohol, shower gel, skin cream, shampoo, hand soap, toothpaste, soap, detergent powder, etc.

Fine Chemicals:Dyes, pigments, various pastes, chemical additives, adhesives, 107 glue, silicone oil, leather oil, emulsion explosives, various colloidal materials.

Food:Chocolate, condensed milk, yogurt, honey, syrup, sucrose, tomato juice, concentrated juice, jam, ice cream, milk, yeast mud, meat, jelly, condiments, vinasse, soy protein, flour, etc.

Paper production:Polyacrylamide (PAM), calcium carbonate, starch paste, carboxylated butylbenzene/propylbenzene latex, rosin, rosin gum, pulp, filler, dry strength: agent, wet strength agent, sizing agent, retention and drainage aid, elimination Foaming, coating, water treatment chemicals, etc.

Chemical fiber:Viscose porridge, PVA, vinylon pulp, acrylic pulp, amine pulp, polyester chips, polyester, polypropylene, rayon, functional fiber, etc.

Medical medicine:Various ointments, extracts, drug lotions, pill pastes, syrups, health products, pharmaceuticals, etc.

Coating:Paints, coatings, inks, insulating varnishes, resins, auxiliaries, organic solvents, etc.

暂未实现,敬请期待
暂未实现,敬请期待
Nantong Fleck is a high-tech enterprise in Jiangsu province integrating equipment research and development, design and manufacturing.The company is specialized in shearing crushing, dispersing emulsifying, crushing and grinding, homogenizing mixing of fluid material particles.At present, the company has passed ISO9001 system, ISO14001 system certification and CE Certification.In 2019, Nantong Fulek was officially listed on the "Science and Technology Innovation Board" of Jiangsu Equity Exchange Center. [Enterprise code: 695418]Nantong Fleck fluid Equipment Co., LTD., with the international advanced manufacturing technology as its tenet and the company's professional manufacturing level as its benchmark, has been constantly researching, exploring and developing high-end technologies in the fluid industry at home and abroad.Over the past two decades, with the unremitting efforts of the R&D team and the advocacy of advanced design and manufacturing concepts, Fulek has launched a number of innovative products, and has successively obtained 8 invention patents, 22 utility model patents and 12 high-tech products.It is the research and development of these high-tech products that have solved the technical problems of many enterprises in the process of shearing, grinding and refining of material particles, and improved the product quality of user enterprises.Created value for users, but also for the company's development direction laid a good foundation.At present, the company has 1 office building, 1 research and development building, dozens of experimental equipment and instruments, the production workshop area of nearly 4000 square meters.Company has a group of highly qualified r&d team, and southeast university, fudan university, east China university of science and technology, Harbin industrial university, nantong university, and many colleges and universities to achieve "production, study and research" long-term cooperation, in order to solve the fluid particles in deep crushing grinding and material in the nano emulsion and other technical problems have made unremitting efforts.
Similar Product Recommend