Welcome Customer !

Membership

XwbooMachine Tool AccessoriesMachine Tool Functional PartsMotorSmall Ac Electric Motors
  • $item.Title
  • $item.Title

Small Ac Electric Motors

Liyuan Motor Ltd

Model
Nature of the Manufacturer
Other
Product Category
Motor
Place of Origin
,
The ML series small ac electric motors, with run and start capacitor, adopts the latest international design and is developed from high-quality materials according to IEC related standards, which is designed and manufactured according to JB/T 7588.

Product Introduction

The ML series small ac electric motors, with run and start capacitor, adopts the latest international design and is developed from high-quality materials according to IEC related standards, which is designed and manufactured according to JB/T 7588. The 220 volt ac motor has good starting and performance, reliable operation, safety, beautiful appearance, convenient maintenance, low noise, and micro-vibration. A series of advantages such as light weight and simple structure. ML series motors are suitable for air compressors, water pumps, refrigerators, medical instruments, equipment and other small machines.


Product Detail



Motor Type: ac motors

Output Power: 0.12 kW - 4 kW

Frame Size: IEC 63 - 112

Number of Poles: 2 / 4

Voltage: 220V / 230V / 240V (based on customers` requirements)

Frequency: 50 or 60 Hz

Protection Level: IP54 or IP55

Insulation Class: B/F

Cooling Method: ICO141

Working Mode: Continuous (S1)


Product Parameter (Specification)



Ac 220v motor and low rpm motor 220v

image001

Production Features


image001

Know More Us


image006

Why Us


image008


Service and Packing


image009

Points to note when using the motor



1. Monitor the change of power supply voltage. The range of voltage change should not exceed or be lower than 10% of the rated voltage. If it is lower than this range, the load should be appropriately reduced during operation. At the same time, the three-phase voltage imbalance cannot be too large. The difference between any two-phase voltage should not exceed 5%, otherwise the Liyuan motor will heat up too quickly. It is best to install a voltmeter and transfer switch to directly monitor the power supply of Liyuan motor.

2. Monitor the operating current of the Liyuan motor. Under normal conditions, it should not exceed the rating on the nameplate. At the same time, attention should be paid to whether the three-phase currents are balanced, and the current difference between any two phases should not be greater than 10% of the rated current, otherwise the Liyuan motor is faulty. Pay special attention to whether there is a missing phase operation. The Liyuan motor with larger capacity should be equipped with an ammeter to monitor the operating current, and the Liyuan motor with smaller capacity should also use a clamp ammeter to measure the line current at any time.

3. Monitor the temperature of the Liyuan motor. The temperature rise should not exceed the allowable limit on the nameplate of the Liyuan motor. The temperature rise during the operation of Liyuan motor is a direct and reliable way to monitor the operating status of Liyuan motor. Installing a voltmeter, ammeter and overload protection device on the line is also the main method to monitor the temperature rise.

4. Monitor the sound, vibration and smell of the Liyuan motor during operation. When the Liyuan motor is operating normally, the sound is uniform, the operation is stable, and there is no smell of insulating paint and burnt smell. If there is abnormal sound, severe vibration, burnt smell of the insulating paint, etc., it indicates that the Liyuan motor is overheated or has other faults.

5. Monitor the working condition of the transmission device. At any time, pay attention to whether the belt pulley or coupling is loose, whether the transmission belt is slipping (slipping is because the belt is too loose), and whether the belt joint is intact.

6. Monitor the working condition of the bearing. Pay attention to the sound and heat of the bearing. When measuring with the thermometer method, the heating temperature of the rolling bearing must not exceed 95°C, and the heating temperature of the sliding bearing must not exceed 80°C. Abnormal sound or overheating of the bearing is caused by poor lubrication and serious wear of the bearing.

7. Monitor the working condition of the fuse. At any time, pay attention to whether one phase of the fuse is blown, so as to avoid the lack of phase operation and the overheating of the Liyuan motor.

In short, Liyuan Motor monitors the changes of its current and temperature during operation, and solves the problems in time.


Our HistoryLiyuan Motor Ltd, founded in 1989, is located in Fuan city, the electric motor town of China. Our company has floor area of 3500 square meters and is a professional manufacturer of small and medium size electric motors, equipped with advanced facilities, advanced production and perfect testing equipments. We are the excellent medium-small size motor manufacturer in China, aiming to provide the highest quality but lowest price to our clients.Our FactoryNow, We have a integrated team of high skilled technicians and professional salesmen with advanced product-development method and modernized management system. In order to manufacture high quality products, we make sure we take strict procedure controls, from “material select”, “machining”, “producing”. “assembling”, and “testing”, on each single part. All of our products are produced by national standard and reach the high level in China. Products is hot sale not only in domestic market also oversea regions such as South-East Asia, Middle Asia etc. Motors are quite welcomed and we received thousands good comments from customers.Our ProductThe main business of the company specially produces the cast-iron electric motor such as Y/Y2/IE2 general motor, YEJ break motor, YVF frequency controlled motor, YD multi-speed motor, YC/YCL/YL single phase motor, YTY pump motor, YLJ break motor etc and alluminum motor such as MS general motor, ML/MC single phase motor as well as brushed DC motor and brushed permanent magnet DC motor.
Similar Product Recommend