Membership
Help
Dongguan Mintech Electronic Technology Co., Ltd.
Dongguan Mintech Electronic Technology Co., Ltd.
Mintech V3
CNC router

(Picture for reference only)
Model:V3
Working voltage :AC380V / 50HZ / 3PH
Working size :1200mm * 600mm * 100mm
The height from beam to working table :200mm
Z axis travel :280mm
Max working speed :20m/min(Tools required for maximum cutting)
Maximum idle speed :30m/min
Repeated positioning accuracy :+ / - 0.05mm
Driving mode : X, Y axis adopt bevel gear rack transmission, the Z axis adopts the high precision ball
screw drive.
Operation software using WeiHong handle control system
² Tool compensation function: support tool radius compensation and length compensation measured by both manual and automatic modes,easy to understand human-computer interface,make users reduce the conversion of tool compensation values. For users using tool length compensation,avoidance of many unnecessary conversions.
Program simulation and real-time simulation, provides powerful program simulation capabilities, can fully display the process of rough cutting. The program simulation function also supports the transition between the analog interface and the processing interface at any time. It is convenient for users to monitor the processing program in real time to make the processing convenient.

Spindle motor :4KW manual tool change 40000RPM
Spindle speed :40000RPM
Cooling:water cooling

Aluminum table with T-slot & high-pressure Vacuum pump
The vacuum table is equipped with a sink around the edge, and is equipped with a water supply and drainage system.
Sample



list of machine configurations
NO | Desc. | Parameter | Remarks | |
1 | Working area | X axial processing scope | 600mm | |
Y axial processing scope | 1200mm | |||
Z axial processing scope | 100mm | |||
2 | Machine parameter index | X,Y,Z axial motion positioning accuracy | 0.05mm/300mm | |
X,Y,Z axial motion positioning accuracy | 0.05mm | |||
Maximum displacement speed | 30m/min | |||
Maximum processing speed | 20m/min | |||
total weight of machine tools | 1500KG | |||
machine tool operating voltage | AC380V/50HZ/3PH | |||
3 | Working table | aluminum table | Vacuum table | |
worktable load | 200KG | |||
4 | Software | Wei Hong professional numerical control system | Weihong handle system | |
5 | Tool changer | No tool library | Manual tool change | |
6 | Drive power( Servo motor ) | X axial drive motor | Servo motor | Delta |
Y axial drive moto | Servo motor | Delta | ||
Z axial drive motor | Servo motor | Delta | ||
7 | Spindle motor(frequency conversion) | cooling | Water cooling | |
spindle speed | 40000RPM | |||
spindle power | 4KW | Manual tool change | ||
Spindle taper | ER25 | |||
Spindle dynamic balance level | G2.5 | |||
Frequency converter | Ivnt | |||
8 | Guide rail | X axle guide rail | square guide rail (20mm) | TBI |
Y axle guide rail | square guide rail (25mm) | TBI | ||
Z axle guide rail | square guide rail (20mm) | TBI | ||
9 | Drive | X shaft drive | Helical rack | |
Y shaft drive | Helical rack | |||
Z shaft drive | Helical rack | TBI |
Mintech V3
CNC router

(Picture for reference only)
Model:V3
Working voltage :AC380V / 50HZ / 3PH
Working size :1200mm * 600mm * 100mm
The height from beam to working table :200mm
Z axis travel :280mm
Max working speed :20m/min(Tools required for maximum cutting)
Maximum idle speed :30m/min
Repeated positioning accuracy :+ / - 0.05mm
Driving mode : X, Y axis adopt bevel gear rack transmission, the Z axis adopts the high precision ball
screw drive.
Operation software using WeiHong handle control system
² Tool compensation function: support tool radius compensation and length compensation measured by both manual and automatic modes,easy to understand human-computer interface,make users reduce the conversion of tool compensation values. For users using tool length compensation,avoidance of many unnecessary conversions.
Program simulation and real-time simulation, provides powerful program simulation capabilities, can fully display the process of rough cutting. The program simulation function also supports the transition between the analog interface and the processing interface at any time. It is convenient for users to monitor the processing program in real time to make the processing convenient.

Spindle motor :4KW manual tool change 40000RPM
Spindle speed :40000RPM
Cooling:water cooling

Aluminum table with T-slot & high-pressure Vacuum pump
The vacuum table is equipped with a sink around the edge, and is equipped with a water supply and drainage system.
Sample



list of machine configurations
NO | Desc. | Parameter | Remarks | |
1 | Working area | X axial processing scope | 600mm | |
Y axial processing scope | 1200mm | |||
Z axial processing scope | 100mm | |||
2 | Machine parameter index | X,Y,Z axial motion positioning accuracy | 0.05mm/300mm | |
X,Y,Z axial motion positioning accuracy | 0.05mm | |||
Maximum displacement speed | 30m/min | |||
Maximum processing speed | 20m/min | |||
total weight of machine tools | 1500KG | |||
machine tool operating voltage | AC380V/50HZ/3PH | |||
3 | Working table | aluminum table | Vacuum table | |
worktable load | 200KG | |||
4 | Software | Wei Hong professional numerical control system | Weihong handle system | |
5 | Tool changer | No tool library | Manual tool change | |
6 | Drive power( Servo motor ) | X axial drive motor | Servo motor | Delta |
Y axial drive moto | Servo motor | Delta | ||
Z axial drive motor | Servo motor | Delta | ||
7 | Spindle motor(frequency conversion) | cooling | Water cooling | |
spindle speed | 40000RPM | |||
spindle power | 4KW | Manual tool change | ||
Spindle taper | ER25 | |||
Spindle dynamic balance level | G2.5 | |||
Frequency converter | Ivnt | |||
8 | Guide rail | X axle guide rail | square guide rail (20mm) | TBI |
Y axle guide rail | square guide rail (25mm) | TBI | ||
Z axle guide rail | square guide rail (20mm) | TBI | ||
9 | Drive | X shaft drive | Helical rack | |
Y shaft drive | Helical rack | |||
Z shaft drive | Helical rack | TBI |