Welcome Customer !

Membership

XwbooMining & Metallurgical EquipmentSteel Rolling EquipmentGrinding MachineSmall Farm Feed Grinder
  • $item.Title
  • $item.Title

Small Farm Feed Grinder

Henan Lerford Machinery Equipment Co., Ltd

Model
Nature of the Manufacturer
Other
Product Category
Grinding Machine
Place of Origin
,
This small farm feed grinder is mainly a high-yield crushing equipment that crushes cotton stalks, sorghum stalks, soybean stalks and small branches into 5-10 cm long. The pulverized material can be used to make gas, paper and charcoal, and can process 1-3 tons per hour. Raw materials can be crushed wet or dry. A straw small farm feed grinder is a machine that uses a rotating hammer to break up feed.

Application of small farm feed grinder:

A small farm feed grinder is suitable for crushing sawdust, shavings, branches, wood chips and various crop straws, corn straws, cotton stalk, rice husk, peanut husk, sweet potato seedling, grain straw, wheat straw and grain, bean cake, bran, etc. concentrate. A small farm feed grinder is an ideal, effective and economical equipment for farmers and sideline processing households. At the same time in the chemical industry, dyes, coatings, plastics, metallurgy, ceramics, food, and non-metallic mining industries also have uses(corn grinder for cattle).


Working principle of small farm feed grinder:

The material is transported by the feeding device to the crushing cavity of the main machine, and the material and the high-speed rotating device and particles impact, collide, rub, shear, and squeeze each other to achieve crushing. The pulverized material is separated from coarse and fine powder by the grading wheel, and the coarse powder flows into the pulverizing cavity for grinding again, and the purified gas is discharged by the induced draft fan(grinding hay for cows).


Technical information of small farm feed grinder:

Model of small farm feed grinder

Power

Output (kg/h)

Weight (kg)

Number of 20 Container

Motor (kW)

Diesel Engine (HP)

GMEC-160

1.5kw /220v,50hz

6HP

50-200 kg/h

74 kg

210 sets

GMEC-230

2.2kw /220v,50hz

6HP

150-560 kg/h

80 kg

180 sets

GMEC-270

7.5kw /380v,50hz

12HP

250-800 kg/h

188 kg

42 sets

GMEC-360

11kw /380v,50hz

15HP

400-1800 kg/h

280 kg

24 sets

GMEC-500

22kw /380V,50hz

30HP

1000-3000 kg/h

720 kg

6 sets

GMEC-600

30kw /380v,50hz


1100-3200 kg/h

800 kg

6 sets

GMEC-800

55kw /380v,50hz


2000-8000 kg/h

1200 kg

5 sets


Description of small farm feed grinder:

1. It has the characteristics of reasonable structure, easy installation, convenient operation, low vibration, strong versatility, high productivity, safe use, etc. It can crush various raw materials, such as corn, sorghum, wheat straw, bean straw, corn straw, straw, Peanut seedlings, sweet potato seedlings, peanut skins, dried weeds, corn, sorghum, dried sweet potatoes, broken bean cakes, and other various grains and dry materials, as well as coarsely crushed cakes, etc. Enterprises and breeders process various livestock and poultry aquatic feeds(grinder for cattle feed).

2. The equipment can be matched with a motor, diesel engine, or tractor. The main machine is composed of a feeding mechanism, guillotine mechanism, wire kneading, and crushing mechanism, bagging mechanism, transmission mechanism, traveling mechanism, protective device, and frame. The grinder mixer for cattle feed has the characteristics of reasonable structure, convenient movement, and automatic feeding. It will not explode the casing due to iron, stone, and sundries entering the machine by mistake, and it is integrated with the power assembly, which is convenient for flow processing(grinding feed for cattle).


Performance advantages and characteristics of small farm feed grinder:

The superfine mechanical small farm feed grinder is a new type of mechanical pulverization equipment independently developed by our company.

1. Low energy consumption: small farm feed grinder integrates centrifugal crushing, impact crushing, and extrusion crushing, which saves energy by 40-50% compared with other types of mechanical crushers.

2. High fineness: Equipped with a self-split classification system, the product fineness is ≥2500 mesh.

3. The feeding range is large: the feeding particle size is less than or equal to 50mm, and the material only needs to pass through the first-level rough crushing equipment(cattle grinder).


Instructions for using of small farm feed grinder:

1. For the long-term operation of the small farm feed grinder, it should be fixed on the cement foundation. If the working location is changed frequently, the small farm feed grinder and the motor should be installed on the frame made of angle iron. If the machine is powered by diesel, the power of the two should be matched, that is, the power of the diesel engine is slightly larger than that of the small farm feed grinder, and the power of the two should be matched. The grooves of the pulley are the same, and the outer end face of the pulley is on the same plane.

2. After the crusher is installed, check the fastening of each fastener and tighten it if it is loose.

3. Check whether the tightness of the belt is appropriate and whether the motor shaft and the grinder machine for the cattle feed shaft are parallel.

4. Before starting the cattle feed grinder, first turn the rotor by hand to check whether the claws, hammers, and the rotor operate flexibly and reliably, whether there is any collision in the shell, and whether the rotation direction of the rotor is consistent with the direction indicated by the arrow on the machine, and whether the motor is connected to the cattle feed grinder. Whether the machine lubrication is good.

5. Do not replace the pulley casually, to prevent the crushing chamber from exploding due to too high rotation speed, or the working efficiency being affected if the rotation speed is too low.

6. After the crushing table is started, it will idle for 2 to 3 minutes, and then start feeding work if there is no abnormal phenomenon.

7. Pay attention to the operation of the livestock feed grinder at any time during the work, and the feeding should be uniform to avoid blocking the boring car and not run overloaded for a long time. If it is found that there is vibration, noise, high temperature of bearing and body, material spraying out, etc., it should be stopped immediately for inspection, and the work can be continued after troubleshooting.

8. The crushed materials should be carefully checked to avoid accidents such as copper, iron, stones and other hard objects entering the crushing chamber.

9. The operator should not wear gloves and should stand on the side of the grinder when feeding to prevent the rebound debris from hurting the face.

Welcome to contact us and discuss more!

Hot Tags: small farm feed grinder, suppliers, factory, low price, for sale, Paper Pencil Machine, Macadamia Nuts Cracking Machine, Potato Chips Production Line, Pelleting Machine, Potato Chips Cutter Machine, Dates Processing Machine
Our HistoryHenan Lerford Machinery Equipment Co., Ltd is an integrated industry and trade company integrating R&D, production and sales.,which has more than 10 years of export and import experience.We are mainly engaged in fruit and vegetable processing production lines, agricultural and animal husbandry machinery and equipment production lines, and related packaging equipment, company services In more than 130 countries and regions around the world, the annual export value is more than 50 million yuan. We have a standardized workshop of 3000 square meters, more than 80 workshop workers, 15 sales teams, 16 technical teams, 6 after-sales service teams, we Have a complete factory production, quality supervision and delivery process, as well as a complete after-sales service system.All our products are provided with a 2-year warranty and lifetime free after-sales service.Taking "Sincerity makes trust, Quality wins market"as our business philosophy, Our company always put quality in the first place and meet our customers' needs by ensuring high quality products and the most professional services, Therefore, our products have been exported to almost the whole world and enjoyed a good reputation from our customer for years.We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success.Welcome everyone!Our FactoryWe have a standardized workshop of 3000 square meters, more than 80 workshop workers, 15 sales teams, 16 technical teams, 6 after-sales service teams, we Have a complete factory production, quality supervision and delivery process, as well as a complete after-sales service system.All our products are provided with a 2-year warranty and lifetime free after-sales service.In view of the global impact caused by the new coronavirus epidemic in 2020, in order to serve customers more conveniently, our company established its own overseas warehouse in Nairobi, the capital of Kenya on the African continent, in June 2021. Customers in Kenya and neighboring countries can contact me directly The company’s overseas warehouse colleagues directly contacted, and some products from overseas warehouses are available from stock. Warehouse address: Kenya Oversea Showroom and Warehouse Address: Mavoko Business Park, Opposite of Signature Mall, along Mombasa Road, Nairobi, Kenya.Working time:Monday to Friday: 8:30-17:00Saturday: 9:00-12:00Our ProductWe are mainly engaged in fruit and vegetable processing production lines, like fruit vegetable washing machine,drying machine,fruit pitter,pitting machine,vegetable peeling machine,potato chips making machine line,chicken paw processing machine line,nut cracking machine,nut processing machine line;agricultural and animal husbandry machinery and equipment production lines, like grass cutter machine,feed pellet machine,puffed food machine,pellet dryer and so on;and related packaging equipment.Product Application1. The fruit and vegetable processing production line equipment produced by our company can be widely used in fruit and vegetable processing plants, large food processing plants, or large group hotels and restaurants.2.Our agricultural and animal husbandry machinery production lines can be widely used in crop harvesting, thresher, crushing and feed pelleting, and can also be used in crop processing plants.3.Our food machinery is the first choice for small and medium-sized entrepreneurial companies or individual bosses, such as various types of puffing machines, chicken feet production lines, peanut processing equipment, fries potato chips production line, peanut butter production line, etc.4.Our packaging machinery serves the above-mentioned fruit and vegetable processing, food processing, and agricultural and animal husbandry products. For example, the crushed materials can be packaged with a packaging machine, and the processed vegetables also need a packaging machine. The packaging machine is a food machinery. Required equipmentOur CertificateHenan Ledford Machinery Equipment Co.,Ltd has won extensive praise and awards Since its establishment in the year of 2012, including ISO quality system certification, Societe Generale de Surveillance SA certification, by virtue of its excellent technical strength and perfect pre-sales and after-sales service system. BV third-party certification has also applied for a number of our own invention patents. We believe that with our strength, we can achieve industry benchmarks in the future!
Similar Product Recommend