Membership
Help
Shenzhen Smida intelligent equipment Co., Ltd
Shenzhen Smida intelligent equipment Co., Ltd
Green laser output wave length is 532nm, compared to CO2 laser and fiber laser, its thermal radiation effective is smaller, is a relative cold light source.
Green laser is typically used in crystal or acrylic marking and engraving
Able to achieve clear marking on plastic material, and high quality marking on silicon material , gold ,silver and other high reflective material.

Model | 07LV | Single pulse energy | 220 uj | Beam mode | TEM00(m2˂1.3) |
Product | Manual green laser marking machine | Single pulse stability | ˂3% rms | spot diameter | 0.7mm |
Pulse width | 18ns | Point stability | ˂500urad | Spot roundness | >90% |
Laser wavelength | 532 nm | Average power | 7 W | Spot divergence angle | ˂2mrad |
Repeat frequency | 10HZ-150KHZ | Average power stability | ˂ ±3% over 24 hours | Work ambient temperature | 15-30 ℃ |
Cooling method | Air cooling | Working voltage | 90-260VAC | Storage temperature | -10-50 ℃ |
Polarization state | straight | Polarization ratio | 100:1 | ||
1、 No further notice if there is appearance,specification change 2、 Do not put danger or hazardous material 3、 SMIDA reserve the final interpretation of our product. . | |||||