Welcome Customer !

Membership

XwbooElectrical & ElectronicsMotorStepper MotorStepper Motor With Gear
  • $item.Title
  • $item.Title

Stepper Motor With Gear

Shenzhen Ineed Youngsun Technology Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Stepper Motor
Place of Origin
GuangDong, ShenZhen

Motor Parameter

Step angle: 18°

Voltage: 5.0 V DC

Resistance: 14 Ω

Drive mode: Bipolar

Pull in torque:>600gf

Gear ratio:1: 50

Dia: 15 mm

Gear box length: 11.45 mm

Overlength: 21.10 mm

D-shfat length: 9.15 mm

Our customized services

The standard shaft type is round type, D-cut type, screw type and I-cut type.

The connection types of input method is Pin type, FPC, PCB and lead wire etc. 

Both Shaft type and connection type are customizable, as well as fixture covers.

What is stepper motor?

Stepper motor is an open-loop control element stepping motor that converts electrical pulse signals into angular displacement or linear displacement.

In the case of non-overload, the motor speed and stop position only depend on the frequency and pulse number of the pulse signal, and are not affected by the load change. When the stepper driver receives a pulse signal, it drives the stepper motor Rotate a fixed angle in the set direction.

The angular displacement can be controlled by controlling the number of pulses, so as to achieve the purpose of accurate positioning; at the same time, the speed and acceleration of the motor rotation can be controlled by controlling the pulse frequency, so as to achieve the purpose of speed regulation.

Stepper 0

More products 2

Company show

INEED a professional high-tech enterprise in micro-motor research and development, production and sales. The main products are brush DC motor, brushless DC motor, stepper motor, DC gear motor, and the application range is extremely wide, including aviation model, intelligent robot, electric vehicle, power tool, security equipment, household appliances, automation

Owning the most advanced manufacture device and testing equiments as well as factory area more than 100,000㎡, the annual output of motor is over 80 million.

stepper motor manufacturer-Ineed

Our certificate

INEED honor new

Our advantages

1) Continuously improve production automation

35 of 47 existing process has been realized automation, automation rate: 75%.

2) No pure manual work

For process that fail to use automate, jigs must be used to assist in the operation.

3) Optimize the production jigs

Design and manufacture engineering fixture and equipment by ourselves.

Including 30% equipment, 90% jigs to reduce lead time and develop period.

4) 40 Continuously improve production efficiency

Efficiency increased by 10% every year in recent years.

5) Continuously reduce quality accident

Strengthen quality management beforehand.

Periodically replace production tools and jigs.

Stepping motors have the following characteristics

1) The angular displacement of the stepping motor is strictly proportional to the number of input pulses. Therefore, after it makes one revolution, there is no accumulated error, and it has good followability.

2) The open-loop numerical control system composed of a stepping motor and a drive circuit is simple, cheap, and very reliable. At the same time, it can also form a high-performance closed-loop numerical control system with the angle feedback link.

3) The stepping motor has fast dynamic response, easy to start and stop, forward and reverse rotation and speed change.

4) The speed can be adjusted steadily in a wide range, and a large torque can still be obtained at low speeds, so the load can generally be driven directly without a reducer.

5) The stepping motor can only be operated by pulse power supply, and cannot directly use AC power and DC power.

6) The stepping motor has oscillation and out-of-step phenomena, and corresponding measures must be taken for the control system and mechanical load.

The stepping motor has two working modes: full-step mode and half-step mode.

7) The accuracy of the stepping motor is 3-5% of the step angle, which is not accumulated. (The stepper motor has only periodic error and no accumulated error)

8) The maximum temperature allowed by the appearance of the stepper motor. It has no characteristic of accumulating errors (accuracy of 99%).

9) The torque of the stepping motor will decrease with the increase of the speed.

10) The stepper motor can run normally at low speed, but if it is higher than the fixed speed, it will not start, accompanied by howling.

  Our plants are expanding and developing very fast since establishment.Certificated by ISO9001, ISO14001, and ISO45001 systems, we can support our clients with good quality products and best service.We have been awarded “National Hi-Tech Enterprise".With strong capability in R&D and high efficiency in production, we continuously improve the quality of our products and service to satisfy our clients.We sincerely wish to establish long-term business relationship and grow stronger together with our clients all over the world!OEM and ODM business are welcome.R&D ManagementR&D Equipments - We have special world-class reliability test facilities, measuring equipments and test centers in the industry.R&D Level - Our R&D level has been in the leading position in the industry over a decade and we aim to provide best design solutions to our customers worlwide.R&D Team - We have a professional technical team with a background of over 20 years in the micro motors industry.ProductionProduction Lines: 75-80% of the production lines are automatic processes.Production Jigs: All jigs and tools are 99% developped by ourselves.Production Efficiency: Increased by 15-20% every year in the recent 5 years.Monthly capacity: 10 million+ pieces.Annual output: 50 million+ pieces.Quality Control & Quality TargetFirst Acceptance Yield (PQC→OQC): ≥98%.Finished Products (OQC): 99% inspection.Defective Rate in acutal use from customer side: ≤200PPM.Customer Satisfaction: ≥99%.On-time DeliveryWe always have stable well-trained employees to keep high production efficiency.We always keep a stable inventory level for top customers.We always keep 99% on-time delivery to satisfy all customers.Environmental & Social ActivitiesSave The Earth, Save Our Homeland!We strictly take actions to protect the environment under the instruction of local laws and related industry regulations. All of our products are green products and in compliance with RoHS and REACH.
Similar Product Recommend