Welcome Customer !

Membership

XwbooInstrumentationFlow MeterFlowmeterSUP-LDG Battery powered electromagnetic flowmeter
  • $item.Title
  • $item.Title

SUP-LDG Battery powered electromagnetic flowmeter

Supmea Automation Co.,Ltd

Model
Nature of the Manufacturer
Manufacturer
Product Category
Flowmeter
Place of Origin
,

Supmea Automation Co.,Ltd

Contact

Phone

15868103947

Fax

The battery-powered electromagnetic flow meter converter adopts internal battery power supply without external power supply. It is suitable for working conditions where the field power grid cannot be reached and the power grid is difficult to lay. It is especially suitable for the monitoring, metering and settlement of the tap water supply system.
  • Specification

 Product

 Electromagnetic flowmeter

 Model

 SUP-LDG

 Diameter nominal

 DN3~DN2100

 Accuracy

0.5%

 Environmental temperature 

-20℃-50℃

 

Relative humidity

≦95%

 Lining material

PTFE, PFA, F46, neoprene, polyurethane rubber, high temperature
rubber

 Flow range

0-15m/s

 Conductivity

Clean water >20 μs/cm

 Communication

RS485 (modbus protocol), GPRS

 Electrode material

SS316, Hastelloy B/C, titanium, tantalum, platinum-iridium alloy,

tungsten carbide

 Electrode type

Standard , scraper, replaceable

 Connection

Flange, plug-in, clamp ,clip-on

 Medium temperature

-20℃~+60℃
Nominal pressure
0.6~4.0Mpa (other can be customized)
Measurement parameter
Instantaneous flow, instantaneous flow rate
Record parameter
Accumulated total Flow
Detection and alarm parameters
Fluid empty pipe detection alarm, excitation current detection alarm
Test mode output signal
Unit volume flow pulse

 

  • Measuring principle

Mag meter works based on Faraday's law, when the liquid goes through the pipe at the flow rate of v with a diameter D, within which a magnetic flux density of B is created by an exciting coil, the following electromotive E is generated in proportion to flow speed v:

E=K×B×V×D

Where:
E-Induced electromotive force 
K-Meter constant 
B-Magnetic induction density
V-Average flow speed in cross-section of measuring tube 
D-Inner diameter of measuring tube   

flowmeter principle

The sensor uses the induced potential E as a flow signal and transmits it to the converter. After a series of digital processing by amplifying, transforming and filtering, the instantaneous flow and cumulative flow are displayed by a dot matrix liquid crystal with backlight.


                 

  • Introduction 

The battery-powered electromagnetic flow meter converter adopts internal battery power supply without  external power supply. It is suitable for working conditions where the field power grid cannot be reached and  the power grid is difficult to lay. It is especially suitable for the monitoring, metering and settlement of the tap  water supply system. The battery-powered electromagnetic flow meter converter adopts ultra-low power circuit technology to design efficient and reliable excitation and signal processing circuits to achieve measurement functions to ensure that the converter has high reliability and stability. At the same time, it  adopts highly efficient system management technology. The system power consumption is reduced, power supply cost is saved, and accurate measurement is realized at the same time.

 

 

  Supmea is committed to industrial process automation sensors and instrument since its establishment for decades. The main products are analysis instrument, recorder, pressure transmitter, flowmeter and other field instruments.By offering super qualified products and one-stop service, Supmea has been working in the industries as widespread as water & wastewater, chemical & petrochemical in more than 130 countries, and will take further efforts to provide the more superior service and meet customers’ satisfaction.By 2022, Supmea has a great number of R&D researchers and engineers, and more than 500 employees in the group. With diverse market needs and global customers ,Supmea has established and is establishing its offices in Singapore, Malaysia, etc. Supmea is making constant efforts to establish strong partnerships with distributors worldwide, integrating itself into the local innovation system and meanwhile contributing to global technological innovations."Customer centric": Supmea will continuously be committed to process automation sensors and instruments, and play an indispensable role in the world instrument industries.
Similar Product Recommend