Welcome Customer !

Membership

XwbooInstrumentationFlow MeterFlowmeterSUP-LDG Remote type electromagnetic flowmeter
  • $item.Title
  • $item.Title

SUP-LDG Remote type electromagnetic flowmeter

Supmea Automation Co.,Ltd

Model
Nature of the Manufacturer
Manufacturer
Product Category
Flowmeter
Place of Origin
,

Supmea Automation Co.,Ltd

Contact

Phone

15868103947

Fax

Electromagnetic flowmeter is only applicable to measure the flow of conductive liquid, which is wide used in water supply, sewage water measuring, industry chemical measuring etc. The remote type is with high IP protection class and can be installed in different locations for the transmitter and converter. Output signal can pulse,4-20mA or with RS485 communication.
  • Specification

 Product Electromagnetic flowmeter
 Model SUP-LDG
 Diameter nominal DN15~DN1200
 Nominal pressure

DN15 - DN250, PN ≤1.6MPa;

DN300 - DN1000, PN ≤1.0MPa;

DN1200, PN ≤0.6MPa;

Higher pressure can be customized

 Accuracy

 ±0.5% F.S.(Flow speed > 1m/s);

 ±0.5% F.S.±2mm/s(Flow speed <1m/s)

 Liner material 

Neoprene (CR), Polyurethane (PU), PTFE (F4), PFEP (F46), PFA

 Electrode material 

316L Stainless Steel, Hastelloy C, Hastelloy B, Ti, Ta, Pt

 Medium temperature

Neoprene: -10…+60℃

Polyurethane: -10…+60℃

PTFE/FEP: -10…+120℃

PFA: -10…+180℃

 Power supply

85-245VAC,50/60Hz, 22VDC-26VDC

 Electrical conductivity Water min.20μS/cm;other medium min.5μS/cm
 Structure type Compact type, Remote type
 Ingress protection

IP65 for converter, IP68 for sensor

 Product standard JB/T 9248-1999 Electormagnetic Flowmeter

  • Measuring principle

Mag meter works based on Faraday's law, and measure conductive medium with conductivity more than 5 μs/cm and flow range from 0.2 to 15 m/s. An Electromagnetic Flowmeter is a volumetric Flowmeter that measures the flow velocity of a liquid through a pipe. 

The measurement principle of magnetic flowmeters can be described as follows: when the liquid goes through the pipe at the flow rate of v with a diameter D, within which a magnetic flux density of B is created by an exciting coil, the following electromotive E is generated in proportion to flow speed v:

E=K×B×V×D

 

            Where:
              E-Induced electromotive force 
              K-Meter constant 
              B-Magnetic induction density
              V-Average flow speed in cross-section of measuring tube 
              D-Inner diameter of measuring tube    
                                                                       

mag meter Measuring principle   

  • Introduction

remote type magnetic flowmeter

Noted: the product strictly prohibited to be used in explosion-proof occasions.


  • Application

Electromagnetic flowmeters have been used throughout industries for more than 60 years. These meters are applicable for all conductive liquids, such as: Domestic water, industrial water, raw water, ground water, urban sewage, industrial wastewater, the processed neutral pulp, pulp slurry, etc

drinking water flowmeter

sewage water flowmeter

water monitoring flowmeter

electroplant flowmeter mag


  • Description

flowmeter feature

flowmeter 4 20ma

flowmeter upgrade

flowmeter calibrated

magnetic flowmeter ce

magnetic flowmeter calibration

mt flowmeter calibrate

yokogawa flowmeter magnetic

 

success story

mag flowmeter application

mag flowmeter application

 

  Supmea is committed to industrial process automation sensors and instrument since its establishment for decades. The main products are analysis instrument, recorder, pressure transmitter, flowmeter and other field instruments.By offering super qualified products and one-stop service, Supmea has been working in the industries as widespread as water & wastewater, chemical & petrochemical in more than 130 countries, and will take further efforts to provide the more superior service and meet customers’ satisfaction.By 2022, Supmea has a great number of R&D researchers and engineers, and more than 500 employees in the group. With diverse market needs and global customers ,Supmea has established and is establishing its offices in Singapore, Malaysia, etc. Supmea is making constant efforts to establish strong partnerships with distributors worldwide, integrating itself into the local innovation system and meanwhile contributing to global technological innovations."Customer centric": Supmea will continuously be committed to process automation sensors and instruments, and play an indispensable role in the world instrument industries.
Similar Product Recommend