Membership
Help
Dongguan Testco Testing Equipment Co., Ltd.
Dongguan Testco Testing Equipment Co., Ltd.
The tensile property of a material is one of the most important and basic properties of its mechanical properties, which largely determines the occasions of use and the service life of the material. The tensile tester can test the tensile properties.
Tensile strength test, generally clamp the material specimen ends on two jigs at a certain distance apart, the two jigs to a certain rate of separation and stretching the specimen, to determine the stress changes on the specimen, until the specimen damage.
The tensile test is one of the most common test methods to study the mechanical strength of materials, concurrently, which requires the use of constant speed movement of the tensile testing machine. According to the different ways of load determination, the tensile testing machines can be broadly divided into two types pendulum tensile testing machines and electronic tensile testing machines, the current use of the more electronic tensile testing machines.TESTEX tensile tester belongs to electronic ones.
Tensile Tester can use different fixtures such as pneumatic stretching fixtures, manual stretching fixtures, bursting fixtures, etc., to meet the tensile strength of a material.
Application scope: Tensile strength tester has been widely used: in scientific research institutes, commodity inspection, and arbitration institutions, universities, and colleges, as well as rubber, tires, plastics, wire, and cable, shoes, leather, textile, packaging, building materials, petrochemical, and other industries. It plays an important role in the process of material development, physical testing, teaching and research, quality control, incoming inspection, production line sampling, etc.
Tensile Tester TF001 applies to the most common international textile testing standards, such as ISO, ASTM, GB, FZ/T, and dozens of other subdivision standards.
1. The test instrument should be selected according to the standard adopted and the region where it is sold.
Because different regions adopt different standards. Usually, European customers widely accept the ISO standard system, American customers widely recognize the AATCC and ASTM standard system, while Japanese customers are more inclined to the JIS standard system. Generally, tensile tester manufacturers will indicate in the product manual which standards apply, certainly, you can consult the manufacturer.
2. Consider the tension range of the test material (maximum tensile strength).
The difference in the tension range of the test material will determine the size of the sensor, and the structure of the tensile tester, but of course, this has little effect on the price (except for the double column type). For general textile testing, a maximum tension of 200N is sufficient. Therefore, the purchase of a single-column tension machine can be. TESTEX tension machine maximum tension of 2500N, a broader range of application; if the maximum tension needs to exceed 5000N should choose a double-column type.
3. According to the test needs to choose the appropriate maximum stroke.
Usually, the maximum stroke is the distance between the upper and lower fixture (test stroke) + the height of the upper fixture + the height of the lower fixture + the height of the sensor. Because different test materials will choose different fixtures, so choose a good fixture to know the specific test stroke. General textile testing, the stroke in 600-800mm can be. Material elongation of more than 1000% can be selected stroke 1000 or 1200mm.
| Test Capacity | 250kg / 500kg |
| Tester Level | Class 1 |
| Max Travel | 800mm (Without fixture) |
| Travel Accuracy | ≤1% |
| Traverse Speed | 1mm/min ~ 500mm/min |
| Speed Accuracy | ≤1% |
| Test Force Range | 0.2%~99%FS |
| Force Accuracy | ≤1% |
| Power | 220 V 50Hz 3A 400W / 110 V 60Hz 5A 400W |
| Net Weight | Packed Weight |
| 85Kg | 140Kg |
| Machine Dimensions | Packed Dimensions |
| 680x500x1450 mm | 780x600x1590mm |
Strictly meet standards
All data for the tensile tester meet the standard parameters.
Consistency with international third-party laboratories
The test data are comparable to the test results obtained by well-known international third-party laboratories.
High repeatability
With the same set of samples, the same machine, after multiple tests, the results are consistent.
High reproducibility
Whether with the same set of samples, or different machines of the same model, after multiple tests, the results are consistent.
Longer service life
For all the tensile testers manufactured by TESTEX, before mass production, prototypes are made and required to pass the strict Reliability Test, i.e. tested under challenging environments such as high and low temperature, high speed and high load, etc., to ensure the expected serving life no less than 10 years.
User-friendly transparent warranty policy
Textile testing machines, 14 months free warranty (12 months normal warranty time + 2 months shipping time). And all spare parts, 3 months free warranty.
We provide full life-cycle support for the tensile testing machines, so feel free to contact our service team with any questions you may have.
If you want to know more about tensile strength testing machines, please visit:
Tensile Tester: The Complete Guide
| ISO 3377-1:2011 | ISO 3377-2:2016 | ISO 13934-1:2013 | ISO 13934-2:2014 |
| ISO 13935-1:2014 | ISO 13935-2:2014 | ISO 13936-1:2004 | ISO 13936-2:2004 |
| ISO 13937-2:2000 | ISO 13937-3:2000 | ISO 13937-4:2000 | ISO 20932-1:2018 |
| ISO 4674-1:2016 | ISO 9073-3:1989 | ISO 9073-4:2021 | ISO 2062:2009 |
| ASTM D5034-09:2017 | ASTM D5035-11:2019 | ASTM D4964-96 | ASTM D1683/1683M-17 |
| GB/T 3917.3-2009 | GB/T 3917.5-2009 | GB/T 3923.1-2013 | GB/T 19976-2005 |
| ASTM D6797-15 | FZ/T 01030-2016 |
Welcome to TESTEX – a professional textile testing instrument supplier – Tensile Tester is on sale, contact us to get a detailed price quote.
A tensile tester, also named a universal material testing machine, is a kind of tester used for adding the mechanical force to fabrics under the test of their mechanical properties such as instrumentation static load, tensile, compression, bending, shear, tear and peel. It is also suitable for testing various physical and mechanical properties of plastic plates, tubes, profiles, plastic film and rubber, wire and cable, steel, glass fiber, and other materials, becoming an indispensable testing machine for boosting material development, teaching research, quality control, and other aspects. The fixture is a crucial componence of the tester. And different materials call for different fixtures, which plays an important role in finishing the test smoothly and the accuracy of the test result.
The tensile tester is mainly applicable to determine the tensile strength of metal and non-metal materials subject to compression, bending, shear, peeling, tearing, etc, such as rubber, plastic, wire and cable, safety belt, insurance belt, plastic profiles, waterproof coil, copper and so forth.
Measure the displacement by the imported photoelectric encoder. The controller adopts an embedded single-chip microcomputer structure. There is powerful measurement and control software inside the machine which integrates the function of measurement, control, calculation, and storage into one system. It can also carry out the automatic calculation of stress, elongation (need to be equipped with an extensometer), tensile strength and elastic modulus, and even statistics of results. Moreover, it has the function of recording the maximum force, fracture point, force, and elongation at the specified point. It is also characterized by the dynamic display of the test process and test curve by the computer which is used for the data processing. Once the test is completed without any error, you can re-analyze and re-edit the data by enlarging the curve in accordance with the graphic processing module. Finally, you can print the report which will denote that the performance of the product has met the international advanced level.
The tensile tester is extensively used across a wide range of industries, such as measurement and quality inspection, rubber and plastic, metallurgy and steel, machinery manufacturing, electronic appliances, auto production, textile and chemical fiber, and commercial arbitration, and technical supervision departments, petrochemical and so on.
一 When adding load on the tensile testing machine, the pointer chattering keeps or stops operation from time to time. There are three reasons for this situation.
There is wear in the clutch gear which needs to repair or replace.
There is wear in the leather washer of the friction disk or spring, which needs to replace with another leather washer or spring.
二 When tensile testing machine pendulum comes back to the original position too fast or slow. There are also three reasons for this situation.
1 the buffer valve block is not properly placed: adjust the buffer valve to the appropriate position.
2 hydraulic oil viscosity is too low or too high: should replace the hydraulic oil with the appropriate viscosity.
3 there is smudginess in the buffer valve, oil pipe, or hydraulic oil: clean the buffer valve and oil pipe. should replace the hydraulic oil.
1 Regularly check the screws in the jaw area. If they become loose, you should tighten them in time.
2 The sliding surface of the steel plate contacting with the liner and the dovetail groove surface on the liner should be kept clean and regularly coated with a thin layer of MoS2 (molybdenum disulfide) grease.
3 Regularly check the transmission of the sprocket. If they become loose, please re-tension the tension pulley.
4 If there is no need to use the machine for a long time, please close the controller and computer.
5 According to the use of the machine and the service life of the oil, regularly replace the oil suction filter and filter element, the hydraulic oil, and regularly check whether there are oil leaks at the host and oil source. If there is any oil leak found, the sealing ring or combination gasket should be replaced in time.
One end of the sample to be tested is held by the upper gripper, and the other end is applied with the standard prescribed pre-tension. It is clamped by the lower gripper. The lower gripper stretches the sample at a constant rate during the test, and the lower gripper drops at a displacement that is the elongation of the sample. The tensile force on the sample is converted into an electrical signal by the sensor connected with the upper gripper, which is amplified by the amplifier and converted by the A/D converter, and the force on the sample during the stretching process is calculated by the microcontroller, and the corresponding data chart is output for reference.
(1) Preparation of specimens. According to the fabric species, choose the shape of the test strip, cut the specimen according to the specified specimen size, and the length direction should be parallel to the warp (longitudinal row) or transverse (or horizontal column) of the fabric. Each sample of warp and weft direction specimens at least 5 pieces, and in the standard atmospheric conditions to adjust the wet 4h.
(2) Prepare a tensile testing machine. According to the shape of the fabric with the appropriate clamping fixture.
(3) according to the requirements, adjust the upper and lower clamp spacing (clamping length), and stretching speed.
(4) Clamp the specimen. First, clamp one end of the specimen in the center of the upper clamp, and then put the other end of the specimen into the center of the lower clamp and straighten it under pre-tension; then tighten the lower clamp (or use the loose clamping method).
(5) Start the button to begin repeated testing and output the data information chart.
Cary –
Electronic tensile strength machines for testing and data processing according to ISO, ASTM and other standards. Tension tester can measure parameters such as tensile strength, compressive strength, bending strength, elongation at break, modulus of elasticity, stress, and strain of materials.
Alan –
TF001 Electronic tensioning testing machine with plc intelligent control system, easy to operate and labor-saving. Suitable for most lab.
kay –
Expect it can run well, just received it.
Yuki –
This universal testing machine is an amazing machine with easy operation, well design and reasonable price. Great!
Candy –
work well!