Welcome Customer !

Membership

XwbooInstrumentationEnvironmental Test ChamberOther Test ChambersThermal Runaway Test Machine
  • $item.Title
  • $item.Title

Thermal Runaway Test Machine

GUANGDONG BELL EXPERIMENT EQUIPMENT CO., LTD.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Other Test Chambers
Place of Origin
GuangDong,
Thermal runaway test machine test the whole vehicle or the complete vehicle-borne ion battery system or the subsystem of vehicle-borne lithium-ion battery system, including a lithium ion battery and an electrically connected lithium ion battery. The applicable standard is UL 2580, IEC 62619.

Thermal Runaway Test Machine Standards

  • UL 2580
  • IEC 62619

Relevant standards requirement

  • Test objects: The test object is the whole vehicle or the complete vehicle-borne ion battery system or the subsystem of the vehicle-borne lithium-ion battery system, including a lithium ion battery and an electrically connected lithium ion battery.
  • Test conditions test shall be started under the following conditions:
  1. Testing should be started at temperature higher than 0 ℃, relative humidity 15%~90%, and the atmospheric pressure 86~106 kpa.
  2. Before testing, The SOC of the test object should be adjusted to 90% or 95% of the normal SOC working range specified by the manufacturer.
  3. Before testing, all the test devices must be running normally.
  4. The test objects should be modified as little as possible when testing, and the manufacturer should submit a list for all changes.
  5. Testing should be at the room temperature or wind speed is not more than 2.5 km/h.
  • Thermal runaway trigger object Heating and needling are recommended as candidates for the thermal runaway test of lithium ion battery systems. Manufacturers can choose one of them.

Technical Parameters

Product NameThermal Runaway Test Machine
ModelBE-8401
Trigger ModeOvercharging and heating (Optional)
Heating Mode Channel2 channel(1 in common used, 1 for spare)
Max. Heating Power3KW, Single channel
Power Adjust ModeChanged the heating tube with different capacity + Adjust the input current.
Power SupplyAC 220V 50Hz
Max. Overcharging Voltage10V and 100V
Voltage Acquisition Channel2 channel (Customizable)
Temp. Acquisition Channel4 channel (Customizable)
Control ModePLC+PC control (PC and main chamber integrated)
Control Host Overall DimensionW700 X D650 X H1360mm
Explosion-proof Chamber DimensionW2000xD3000xH2000mm (Optional)
Total Weight1000KG
Power SupplyAC 220V , 7.0KW

Thermal Runaway Test Machine Test method

The two methods of heating and nail penetration are recommended as candidates for the thermal diffusion test lithium-ion battery systems. Manufacturers can choose one of these methods or choose other methods to trigger thermal runaway.

Thermal runaway trigger object

  • The lithium-ion battery cell in the test object.
  • Choose a lithium-ion battery cell close to the center of the lithium-ion battery pack or surrounded by other lithium-ion battery cells and difficult to generate thermal radiation.

Nail penetration triggers thermal runaway

  • material: steel
  • Nail penetration diameter: 3 mm~8 mm
  • Nail penetration tip shape: conical, angle 20°~60°
  • Nail penetration speed: 10 mm/s ~100 mm/s
  • Nail penetration position and direction: select the position and direction that can trigger the thermal runaway of the lithium ion battery cell (for example, the direction perpendicular to the pole piece). (Cooperate with the nail penetration testing chamber or the nail penetration testing equipment at the bottom of the battery pack to complete the test)

Heating triggers thermal runaway: use planar or rod-shaped heating devices, and the surface should be covered with ceramic, metal, or insulating layer.

For the block heating device with the same size as the lithium-ion battery cell, the heating device can be used to replace one of the lithium-ion battery cells, which is in direct contact with the surface of the trigger object; for the thin-film heating device, it should always be attached to the trigger object.

The heating area of the heating device should not be greater than the surface area of the lithium ion battery cell; the heating surface of the heating device directly contacts the surface of the battery cell, and the position of the heating device should correspond to the position of the temperature sensor.

Start the heating device immediately to heat the triggered object with the maximum power of the heating device; when thermal runaway occurs or the temperature of the defined monitoring point reaches 300℃, stop the trigger.

  Guangdong Bell Experiment Equipment Co., Ltd was established in 2005 with a registered capital of RMB 16.8 million. Located in Dongcheng District of Dongguan City, its factory covers an area of 20,000 square meters, with a building area of 12,000 square meters. As DGBELL attaches great importance to producing first-rate products, talents are highly valued. Among the 120 employees, half of them are with a college education background and 15 senior engineers, Enable us to provide excellent equipment and service to satisfy various customers, especially the customized non-standard equipment. Currently, after great efforts over the last 14 years, our annual production capacity has reached RMB 120 million.DGBELL not only focuses on the research and development of test chamber, but also specializes in its manufacture, selling as well as customer service. A wide variety of products are introduced into markets, such as Li-ion Battery Safety Test Equipment, EV (Electric Vehicle) Battery Safety Test Equipment, Environmental Test Equipment and Mechanical Test Equipment. We cooperated with many international famous corporations from Europe, Asia, South America and Australia, including auto companies, battery companies, electronic production companies, detection institutions and laboratories.As a responsible enterprise, DGBELL’s mission lies, on one hand, in creating a platform for staff to pursue happiness and fulfill their dreams, and on the other hand, providing customers with top-class testing solutions. To become the leading brand of the test equipment industry, DGBELL stresses commitment, pragmatism, service and creativity as its core value, and is always in the pursuit of high quality, customer satisfaction, continuous improvement as well as perfection and excellence of products.DGBELL aims at “ Technology assures quality while service enhances product” and orientated “ service first, sales follow; sincerity to each other and win-win”. DGBELL established a complete 4S system (Sale, Spare Part, Service, Survey) while DGBELL will utilize its wide and depth national relationship, powerful marketing and after-sale services capacity, rich technical strength to provide our customers with ideal Research, manufacturing environments & equipment that widely applied in electronics, Li-ion battery, EV battery, semi-conductor, medical, chemical, cosmetic, coatings, petroleum oil, food industries.Quick, high-efficient service is provided to eliminate customer’s worries. For years, DGBELL except performing a good service of its own products and distributed products, solves imported branded instrument repairing and maintenance to answer for customer’s demand so that established a good enterprise image among customers.
Similar Product Recommend