Welcome Customer !

Membership

XwbooInstrumentationEnvironmental Test ChamberOther Test ChambersThermal shocking testing chamber (3 areas)
  • $item.Title
  • $item.Title

Thermal shocking testing chamber (3 areas)

Hyde Science and Technology Limited

Model
Nature of the Manufacturer
Manufacturer
Product Category
Other Test Chambers
Place of Origin
ShanXi, XiAn
Thermal shocking testing chamber (3 areas)

Thermal shocking testing chamber (3 areas)

This chamber is designed for cyclic climatic tests, to test temperature resistance of samples in a rapid temperature change.

The design of this chamber includes:

◆ High temperature zone;

◆ Testing (working) area;

◆ Low temperature zone.


 The working area of this chamber is fixed, and equipped with dampers for supplying hot and cold air. Samples for testing are in the basket and placed in the working area. Use damper to supply hot and cold air to change the temperature of the working area and implement the program of high temperature and low temperature maintenance. Additionally, there is a damper for supplying ambient air to the working area for carrying out relevant tests.

 

Technical specifications:

Model

HD-CTS3-1J

HD-CTS3-2J

HD-CTS3-5J

HD-CTS3-10J

Internal volume (L)

120 L

210 L

504 L

900 L

Internal dimensions (D*W*H)

400*500*600 mm

500*600*700 mm

700*800*900 mm

900*1000*1000 mm

External dimensions (D*W*H)

1620*1460*2360 mm

1720*1560*2460 mm

2120*1820*2260 mm

2420*2020*2660 mm

Preheating area

Preheating temperature upper limit

200℃

Heating time

R.T.~+200℃: 40min (approximately)

Pre-cooling area

Pre-cooling temperature lower limit

-75℃

Cooling time

R.T.~-70℃: 90min (approximately)

Working area

Temperature shocking range

High temperature: 60℃~+150℃;

Low temperature: -55℃~-10℃; 

Temperature fluctuation

≤±0.5℃

Temperature deviation

≤±2℃

Temperature recovery time

≤5min

Material

Shell

Cold rolled sheet steel, spray plastics on surface

Internal material

Stainless steel

Thermal insulation material

Polyurethane foam + glass wool

Refrigeration system

Refrigeration mode

Mechanical compression, two-stage refrigeration

Cooling mode

Water cooling

Compressor

Imported compressor

Controller

Programmable logic controller, 7’’ LCD touch screen

Power supply

АС380V, 50Hz, Three-phase four-wire + earth wire



  Hyde Science and Technology Limited, established in 2010, is a high-tech corporation with equipment development, production, sale and maintenance integrated. Our company is engaged in studying and developing the climate testing techniques, manufacturing environmental testing equipment, researching and developing management software. Our main equipment are: temperature test chamber, temperature humidity test chamber, high low temperature/ low air pressure test chamber, thermal vacuum chamber, thermal shock testing chamber (2/3 areas), salt fog chamber, sand and dust test chamber, rain spray test chamber, temperature humidity vibration test chamber, walk in temperature (humidity) test chamber, customized test chamber, drying oven, etc.. These products are widely used in aerospace, electrical and electronics, instrumentation, national defense industry, solar modules, auto parts, biological medicine, universities and colleges, etc.. We also reach cooperation arrangements with domestic first line manufacturers of mechanical equipment and measuring equipment, sell various types of mechanical measurement and testing equipment, such as vibration system, shock / bump system, centrifuges, tilting and swing system, CMM (coordinate measuring machine) and various nonstandard customized mechanical equipment, to satisfy the diversified demands of customers. We keep professionalism, dedication and innovation, constantly increase our technical power, create good conditions of new equipment and technology to all our customers. We are proud of your successes and sincerely hope for long term and mutually beneficial cooperation with you.
Similar Product Recommend