Thermocouple Control Cable
Application:
For use as a 600 Volt, multi-pair thermocouple instrumentation cable where flame-retardance, and moisture/chemical resistance is critical. Cable can be installed in free air, in raceways, or direct burial. The cable is also approved for wet or dry locations as well as Class 1 Division II industrial hazardous locations per NEC 501-4(b) for (UL) Type Tray Cables (TC).
Temperature rating of 90oC wet or dry. Insulation provides excellent electrical, thermal, and physical properties, excellent flame resistance and resistant to crush, compression, cuts and heat deformation. Also conductor insulation provides good low temperature (-40oC) cold bend characteristics.
Approved for direct burial.
Construction:
Conductor is thermocouple alloy per ANSI MC96.1 - 1982.Extruded flame-retardant ethylene propylene rubber (EPR) insulation.Conductors twisted together with a drain wire and aluminum mylar shield. Shielded pairs cabled together with fillers as needed to form a round core. An overall aluminum mylar shield and drain wire is applied over the core.Pairs are color coded per thermocouple type with pair number printed on the negative (red) conductor. See chart below for specific color codes.Black, flame-retardant, sunlight resistant, Chlorinated Polyethylene (CPE) jacket. Available with color coded jacket.Available with class B stranding per ASTM B174.
Standards:
Insulated Conductor - VW-1.UL Type TC, 90oC Wet or Dry, 600VICEA S-82-552, 90oC Wet or Dry, 600V.Passes UL 1277 Flame Test (70,000 BTU/hr).Passes UL 1202 Flame Test (70,000 BTU/hr).Passes IEEE 383 Flame Test (70,000 BTU/hr).Passes ICEA T-29-520 Flame Test (210,000 BTU/hr).
EX - Color CodeChromel (Positive) - PURPLEConstantan (Negative) - RED
JX - Color CodeIron (Positive) - WHITEConstantan (Negative) - RED
TX - Color CodeCopper (Positive) - BLUEConstantan (Negative) - RED
KX - Color CodeChromel (Positive) - YELLOWAlumel (Negative) - RED
Note: Dimensions and weights shown are nominal, subject to industry tolerances. Dimensions and weights for other cabLe configurations are available upon request.
China Anhui Electric Group Shares Co.,Ltd.(CAHE) is a global company responsible for the design, production and distribution of wire and cable for the Renewable Energy Industry (Wind and Solar) and to Electric Utilities responsible for power generation, transmission and distribution. CAHE also provides traffic signal cable and lighting cable to municipalities.Serving these industries since 2004, China Anhui Electric Group Group’s accumulated experience spans over 100 combined years in the Wire & Cable industry. Our products include Overhead Bare Aluminum Conductors (ACSR, AAAC, AAC, ACSS), Industrial Power Cables, 15-35kV Copper and Aluminum Primary Distribution Power Cables, Secondary Aluminum and Copper 600V Service Drop and URD, 600V and 1kV Multi-conductor Control Cables, Galvanized Steel Wire, Bare Copper Conductors, Copper clad Steel,Aluminum Clad Steel, Static Wire, Substation Control Cables, Fiber Optic Cables, Hardware, OPGW and more.CAHE makes it easier and less expensive as a complete solution for all cable needs. With inventory over $2 million in warehouses across P.R.China, we can solve immediate needs. Combined with our extensive manufacturing capability to ensure large project requirements, Anhui Electric Group Shares Co.,Ltd. handles needs both large and small.Our products are approved by CCC,AEIC, ICEA, ASTM, UL as applicable. (IEC, CSA, BS also available). Anhui Electric Group Shares Co.,Ltd. is ISO 9001,14001,18000 certified.