Welcome Customer !

Membership

XwbooEnvironmental ProtectionBiological Treatment EquipmentDrying Equipmentthree drum dryer
  • $item.Title
  • $item.Title

three drum dryer

Zhengzhou Hengxing Enginering Technology Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Drying Equipment
Place of Origin
HeNan, ZhengZhou
three drum dryer

three drum dryer

Usage and application:

The three drum dryer improves the internal structure on the basis of single drum dryer, the pre-drying of wet material is added before getting into the dryer and prolong the drying time of wet material in the dryer. It is widely used in various industries’ slag, clay, coal, iron ore powder, ore powder, and dry mixed mortar, yellow sand and other mixed materials.

Working principle:

Materials enter the inner side of the drum through the feeding device to realize current flow drying process, and then the materials enter the middle layer of the inner wall through the other end to realize counter current drying process. They are lifted in over and over in the middle layer which advance in two-steps forward and one-step back way. The three-drum dryers absorb heat from both inner drum and middle drum, which extend the drying time and realize the best drying condition. Finally, materials fall into the external layer of the drum from the other end of the middle layer, processing in a rectangle multi-loop way. The dried materials move quickly out of the drum under the hot air, while the wet ones remain because of their own weight. Materials are dried completely inside the rectangle shoveling plate and then cooled by the single drum cooler, thus finishing the whole drying process.

Features:

1. Low outlet air temperature, longer service life of dust removal equipment.

2. Sizes of lump materials, particles, and powders are less than 20mm can be dried.

3. Gear driving is not required and it’s directly driven by roller, with higher mechanical efficiency.

4. Without the phenomenon of air leakage, the sealing difficulty is totally solved, and the installation can be finished within a few hours.

5. 50% of area covers has been reduced compared with the single drum dryer, and land investment reduced by 50%, power consumption reduced by 60%.

6.The self-insulation thermal efficiency of three-cylinder dryer can reach above 70% (the self-insulation thermal efficiency of traditional single drum dryer is only 35%), it has remarkable energy saving effect.

7. Final moisture indicators can be regulated easily according to the request.

8. Less than 1% of material moisture can be assured by the three-cylinder dryer, which is the preferred product for the dry mixed mortar and slag powder production line.

9.The temperature of discharged material is < 50 ℃, which can be directly conveyed into the storage silo, needless to cool down in the cooling shed.

Techncial specifications:

Project Unit

φ2.0×6m

φ2.5×6.5m

φ2.7×7m

φ3×7m

φ3.2×7m

φ3.6×8m

φ4.2×8.5m

Outer Tube Diameter (m)

2.0

2.5

2.7

3

3.2

3.6

4.2

Outer Tube Length (m)

6

6.5

7

7

7

8

8.5

Cylinder Volume (m3)

18.84

31.89

40.5

49.46

56.26

81.38

118

Rotating Speed (rpm)

3-10

3-10

3-10

3-10

3-10

3-10

3-10

Material Staying Time(min)

12-30

12-30

12-30

12-30

12-30

12-30

12-30

Intial Moistue (%)

6-25

6-25

6-25

6-25

6-25

6-25

6-25

Final Moisture (%)

≤1

≤1

≤1

≤1

≤1

≤1

≤1

Max Inlet Temperature (ºC)

750-900ºC

750-900ºC

750-900ºC

750-900ºC

750-900ºC

750-900ºC

750-900ºC

Capacity (T/H)

Slag

20-25

25-30

30-35

35-10

40-45

50-65

70-85

 

Coal Ash

10-17

17-21

20-25

23-27

25-30

30-45

45-63

 

Yellow Sand

20-27

25-40

27-45

30-45

35-50

55-75

75-99

Model of Motor

Yr160m-4

Yr132m-4E

Yr160m-4

Yr160m-4

Yr132m-5E

Yr160m-4E

Yr160m-4E

Motor Power (kw)

7.5×2

11×2

7.5×4

7.5×4

11×4

15×4

18.5×4

Model of Reducer

XWD-6

XWD-6

XWD-6

XWD-6

XWD-6

XWD-8

XWD-8

Speed Ratio of Reducer (I)

17-29

17-29

17-29

17-29

17-29

17-29

17-29

Weight (T)

25

32

35

38

43

57

77

 

Zhengzhou Hengxing Enginering Technology Co., Ltd. is a joint-stock mining machinery manufacturing enterprise integrated in scientific research, production and marketing. It is located at the High & New Technology Industries Development Zone of Zhengzhou,China with an area of 50 thousand m2 which includes 15,000 m2 of standard heavy duty industrial workshop. Equipments are more than 160 pieces, including large and medium sized metal processing, riveting and installing equipments. There are more than 660 workers including 80 administrators with secondary and senior occupational titles and engineering technicians.Zhengzhou Hengxing Enginering Technology Co., Ltd. is specializing in the research, development, and manufacture of industrial stone crushing & screening equipments, grinding mills, ore dressing equipment ,calcination equipent ,coal briquette equipment mining equipments and so on. They are widely used in the industry of mining, construction materials, chemicals, metallurgies, transportation, hydraulic engineering and so on.. Our products are not only renowned in more than 20 provinces and cities in domestic markets, but also have being sold all over the world like Eastern Europe, Middle East, Africa, South Asia, Southeast Asia, Oceania, and Central and South America etc.Our company has already formed a full set of modern production line, equipped with intelligent and standardized testing, controlling laboratories, and owned a professional team of R & D, production, sales and service. Zhengzhou Hengxing Enginering Technology Co., Ltd. lays much emphasis on the quality and clients. We serve clients with the quality guideline of being responsible for every working procedure, every product and every client. What we have done is for the clients and we believe that quality is the best way to develop market. All of the products have passed the authentication of ISO9001. Reliable and stable quality is the key to success; our products are well known at home and abroad
Similar Product Recommend