Welcome Customer !

Membership

XwbooInstrumentationTesting MachineTransformer Testing MachineThree Phase Power Analyzer for Transformer Testing
  • $item.Title
  • $item.Title

Three Phase Power Analyzer for Transformer Testing

Wuhan Goldhome Hipot Electrical Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Transformer Testing Machine
Place of Origin
HuBei, WuHan
1.Waveform real-time display (4 channels voltage/4 channels current).2.True RMS values of voltages and currents.3.The DC components of voltages.4.Peak current and voltage values.5.Minimum and maximum half-cycle RMS current and voltage values.6.Pharos diagram display.7.Measurement of each harmonic up to order 50.8.Bar charts show harmonic ratios of current and voltage of each phase.9.Total harmonic distortion (THD).
Brief introduction


This Three Phase Power Analyzer for Transformer Testing is mainly used for troubleshoot of complex power system more quickly and accurate, and monitoring and maintenance of power quality parameters more comprehensive and systemic.

It can simultaneously measure the 4-channel current (ABC three phase and neutral wire current), 4-channel voltage (ABC three-phase voltage and neutral line voltage to ground), the peak value of current voltage, maximum/minimum value over a period, three-phase imbalance factor, short-time voltage flicker, transformer K factor, active power, reactive power, apparent power, power factor and displacement power factor, active power, reactive power, apparent power, total harmonic distortion and harmonic, etc; Display real-time waveform, harmonic ratio bar charts of current voltage; Dynamically capture instantaneous change of voltage current, monitoring starting current, monitoring the power parameters and generate the alarm list, generate the trend chart for a long time record test data.

Three Phase Power Analyzer for Transformer Testing adopt DSP + ARM double processor architecture, DSP is use for data collection and the processing of algorithm, the ARM is use for the communication protocol and the man-machine interface processing;

Three Phase Power Analyzer for Transformer Testing apply to electricity industry, petrochemical, metallurgy, railway, mining enterprises, scientific research institution, metrological department. Especially suitable for comprehensive analysis and diagnosis on all the voltage, current, power, power, harmonic, phase electric parameters.


Functions


1.Waveform real-time display (4 channels voltage/4 channels current).

2.True RMS values of voltages and currents.

3.The DC components of voltages.

4.Peak current and voltage values.

5.Minimum and maximum half-cycle RMS current and voltage values.

6.Pharos diagram display.

7.Measurement of each harmonic up to order 50.

8.Bar charts show harmonic ratios of current and voltage of each phase.

9.Total harmonic distortion (THD).

10.Active, reactive, apparent power, by phase and cumulative.

11.Transformer K factor.

12.Power factors (PF) and displacement factors (DPF or COSΦ).

13.Short-term voltage flicker (PST).


Interface as below:

1(001)


Technical specification


Base condition and working condition

Influence factor

Test item

Base condition

Working condition

Environment temperature

All parameters

(23±2)°C

-10°C~ 40°C

Relative humidity

All parameters

40%~ 60%

<80%

Phase-to-neutral voltage

All parameters

(100±1%)V

1.0V~ 1000V

Phase-to-phase voltage

True RMS phase-to-phase voltage

(200±1%)V

1.0V~ 2000V

Current

True RMS current

(5±1%)A

10mA~ 1000A

Network frequency

All parameters

50Hz±0.1Hz

40Hz~ 70Hz


Phase shift

Active power and active energy

Cosφ=1

Cosφ: 0.2~ 1.0

Reactive power and reactive energy

Sinφ=1

Sinφ: 0.2~ 1.0

Harmonic

All parameters

<0.1%

0.0%~ 99%

Voltage unbalance

All parameters

<10%

0.0%~ 99%

Working voltage of device

All parameters

DC9.8V±0.1V

DC9.5V~ 10.5V

External electric field,
magnetic field

All parameters

Should be avoided


Test position

Measured related parameters of
current

Tested wire at the center of clamp.


General specification

Power supply

Rechargeable lithium-ion battery packs 9.6V, backup charger.


Battery indicator

Battery symbol shows dump energy. When the voltage is too low, automatic shutdown after the 1 minute.

Power consumption

Current consumption of normal test 490 mA, continuous working for 8 hours.

Display mode

LCD color screen, 640dots×480dots, 5.6 inches, display domain: 116mm×88mm.


Size of clamp

008B small sharp current clamp: 7.5mm×13mm; 040B circle current

clamp: 35mm×40mm;
068B circle current clamp: 68mm×68mm.
300F Flexible Coil Current Sensor (with Integrator) : Ф300mm

Instrument dimensions

L×W×H: 240mm×170mm×68 mm.

Number of channels

4U/4I.

Phase-to phase voltage

1.0V~2000V.

Phase-to-neutral voltage

1.0V~1000V.


Current

008B current clamp: 10mA~10.0A; 040B current clamp: 0.10A~100A;

068B current clamp: 1.0A~1000A;
300F Flexible Coil Current Sensor (with Integrator) : 10A ~ 3000A

Frequency

40Hz~70Hz.

Parameters of electricity

W, VA, Var, PF, DPF, cosφ, tanφ.

Energy parameters

Wh, Varh, Vah.

Harmonic

Order 0~50.

Total harmonic distortion

Order 0~50, each phase.

Expert mode

Yes.


Number of Transient
records

150 sets.

Voltage flicker

Yes.

Starting current mode

Yes, 100 seconds.

3 phases unbalance

Yes.


Record

300 days(simultaneous recording 20 parameters, record one point every 5 seconds).

Min/Max recorded value

Measurement of maximum and minimum values over a period of time.

Alarm

40 different types of parameter selections, 12,800 sets alarm logs.

Peak

Yes.

Phasor diagram display

Automatically.

Capacity of snapshots

60.

Menu language

English/Chinese.

Communication

USB.


Automatic switching off

When an alarm campaign is initiated or a search for transients, an inrush
current capture, or a trend recording is pending or in progress, the

device is not automatic switching off.

In other test mode, 15 minutes without keystrokes, automatic shutdown after prompt 1 minute.

Backlight function

Yes, suitable for use at night and dark place.



Weight

Host: 1.6kg (with battery).

008B small sharp current clamp: 170g×4;

040B circle current clamp: 190g×4;

068B circle current clamp: 510g×4;

300F Flexible Coil Current Sensor (with Integrator) : 330g×4;

Test wires and power adapter: 900g;

Total weight: about 9.2kg (with packaging).

Length of voltage test wire

3m.

Length of current sensor
wire

2m.

Working temperature and
humidity

-10°C~40°C; below 80%Rh.

Storage temperature and
humidity

-10°C~60°C; below 70%Rh.

Input impedance

Input impedance of test voltage: 1MΩ.


Withstand voltage

Withstand 3700V/50Hz sinusoidal AC voltage for 1 minute between

instrument wiring and shell.

Insulation

Between instrument wiring and shell ≥10MΩ.

Structure

Double insulation, with insulation vibration-proof sheath.


Safely rules

IEC 61010 1000V Cat III / 600V CAT IV, IEC61010-031, IEC61326,

Pollution degree: 2.


Service and Support


1.Strictly factory test for Three Phase Power Analyzer for Transformer Testing

All products will be assembled and test strictly according with our product process standard. All qualified products will be issued factory release reports and certificate labels.Defect products or non-qualified products won’t be allowed to make deliver.

2.Support technical guidance

We also provide the training for the operators. Complete training includes the skilled operations of our equipment, maintenance and troubleshooting . it also ranges the commissioning and test of our products at site!


Introduction


Wuhan Goldhome Electrical Equipment Co., Ltd .(abbreviated as Goldhome Hipot ) was established in 2008, formerly known as the third production enterprise of the national inspection unit, and then through the reform and recombination, we set up the high voltage testing equipment manufacturer.

Goldhome hipot adheres to the” integrity of management, quality-based” concept, dedicated to providing high-quality products and effciency & perfection after-sales service for our all customs,struggling for the global HV power doctor!

1

  Wuhan Goldhome Hi pot Electrical Co.,ltd(short for Goldhome Hi pot) was established in 2008, its predecessor was state-owned third industry enterprises, one of the earliest enterprises specially in develop, design and manufacture high voltage testing equipment in China.In 2016, merged with Wuhan Sang Electric Co., Ltd. , we realize advantageous compartmentalize and resources reorganization.Now it has become a high-tech enterprise integrating R&D, production, marketing installation and commissioning.1.our-historyOur FactoryGoldhome Hi pot is located in Huading Mould Industrial Park, Economic and Technical Development Zone, Wuhan City, Hubei Province, China, working area more than 4000 square meters.As a high-tech enterprise, we are supported by natural advantages from various research universities in Wuhan city. Goldhome Hi pot works closely with professors from State Grid Power Science Research Institute, Electrical Engineering Colleges of Wuhan University and other scientific research institutions, constantly improving technology and updating products . Now Goldhome Hi pot has more than 20 patented technologies, and many software Copyrights!2.our factory-1product and product applicationOur ProductOur advantage products included AC Resonant Test System, PD Free Test System, AC/DC Hi pot Tester, Primary Current Injection, VLF Hi pot Tester, transformer tester,impulse generator,Transformer oil tester,HV Switch gear Tester ,Insulation Tester,ground Resistance Tester,cable fault locator,relay test set,CT PT analyse,arr ester tester and sf6 gas analyzer,etc.Product ApplicationAll the performance indexes of above testing equipment can reach the leading level in China, widely used in power supply bureau, power plant, power construction, railway, petroleum, chemical industry, metallurgy, coal and other industries.In recent years,our factory continues to expand overseas markets, some competitive products are already exported to American and European countries, Africa, Middle East, etc , and well praised by customers.product applicationOur CertificateAll product process is strictly in accordance with international standards and power industry regulations. And the products are through the national, provincial power authorities testing, as well as CE certification! At present,0ur company has received ISO9001:2015 quality management system certification, ISO14001:2018 occupational health and safety management system certification, and ISO14001:2015 environmental management system certification,and also had got SGS certification.We has more than 20 patented technologies,such as The utility model patent of a frequency conversion series resonance test device,The utility model patent of Lightning impulse voltage testing equipment,The utility model patent of DC high voltage generator,The utility model patent of microcomputer relay protection tester,The utility model patent of High voltage switching characteristic tester., etc.4.certificateoverseas market & our serviceOverseas MarketOur products are sold to Europe, Asia, Africa, North and South America and Oceania, Middle East, etc.and are well received by customers.We had won the bids for the purchase of high-voltage no-partial discharge test equipment from the Polish state-owned insulator production plant, the Myanmar National Grid cable fault tester purchase project, and the high-voltage test equipment purchase project of a Russian power installation and test engineering company.We also sell to end customers, and a single device can also be sold. For example, there are power maintenance and installation companies in Indonesia, South Africa, Denmark, and South Korea, and universities and research institutions purchase and use our test equipment.At the same time, our sales targets also include agencies. At present, we already have cooperated with agents in Singapore, Israel, Mauritius , etc.We insist on providing customers with first-class products and first-class services with reliable product quality and perfect service team.5market-1Our service1.Strict factory testAll products will be assembled and test strictly accord with our product process standard. All qualified products will be issued factory release reports and certificate labels.Defect products or non-qualified products won’t be allowed to make deliver.2.Providing technical materialsDuring the product acceptance, we provide the related manual sheets, packing list,qualified certificate labels, factory test reports and other technical documents.3. Support technical guidanceWe also provide the training for the operators. Complete training includes the skilled operations of our equipment, maintenance and troubleshooting . it also ranges the commissioning and test of our products at site!After-sale service1.First-use responsibility systemAfter the product is delivered, the technician can guide the operation at site if the client requires, and be responsible for the first use of each part2.One year warrantyAll products warranty is 1year, life-time maintenance .During the warranty period, if any defects or damaged because of product’s quality, maintenance or replacement can be provided with free charge in order to let our client’s satisfied !3.TroubleshootingIf the troubleshooting is not difficult, and client can handle with it by themselves, we can offer the call-on line guide within 1 hour!If the troubleshooting is difficult to handle with for client, we can promise that the best solution can be provided within 24 hours!
Similar Product Recommend