Welcome Customer !

Membership

XwbooInstrumentationLaboratory equipmentOther Laboratory equipmentsTML-B Insert Tester
  • $item.Title
  • $item.Title

TML-B Insert Tester

Qingdao Yosion Intelligent Technology Co.,Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Other Laboratory equipments
Place of Origin
ShanDong, QingDao

Qingdao Yosion Intelligent Technology Co.,Ltd.

Contact

Phone

18266399631

Fax

Related categories
At present, there are three general methods for testing the transportable moisture limit (TML): 1 flow plate test, 2 penetration test, and 3 Portuguese/ Fan's test.

product description

TML-B Insert Tester

At present, there are three general methods for testing the transportable moisture limit (TML): 1 flow plate test, 2 penetration test, and 3 Portuguese/ Fan's test.

As each method has its own advantages, the test method should be determined by the local actual situation or by the competent authority.

TLM-B Penetration tester is the equipment specialized for flow moisture point (FMP) and transportable moisture limit (TML) tests. It fully meets test requirements in MSBC Code about ultimate fitness water for cargoes which may liquefy.


Features

• Concentrate or other particulate matter with a maximum particle size of 25mm;

• Adopt well-known brand PLC, high-performance LCD touch screen control system;

• Adopting joint venture brand drive motor, long-term operation, maintenance-free, protection grade IP55;

• Imported rubber springs ensure stable vibration amplitude;

• The control cabinet has storage space for storing maintenance tools;

• Large round cylinder 4700cm³, inner diameter 194mm; small round cylinder 1700cm³, inner diameter 146mm

• A vibrometer is included with the machine, which can be monitored in real time in the experiment;

• Low noise, more stable operation


Dimensions

Determination of Transportable moisture limit for Iron fines-Penetration test procedure:

It is suitable for the determination of water content limit of iron ore powder, coal with maximum particle size of 25 mm, iron oxide powder with maximum particle size of 25 mm and other similar minerals.


Principle:

The sample in the cylinder is vibrated at 2 GMS ± 10% (G is the acceleration of gravity) for 6 minutes. If the insertion depth of the scale on the surface of the sample is greater than 50 mm, the moisture content of the sample is greater than that of the flowing water point. The average value of moisture content after the sample has just reached the flowing water point and the moisture content just before it has reached the flowing water point is taken as the flowing water point of the sample. The suitable water content limit of iron ore is 90% of the flowing water point.

Insertion degree suitable for transport moisture limit tester composition

1 round cylinder. The round cylinder should be sufficiently rigid, non-magnetic, and made of impermeable light materials, such as acrylic resin or polyvinyl chloride. Small cylinders are used for materials with a maximum particle size of no more than 10mm: Large cylinders are used for materials with a maximum particle size of less than 25mm.

2. Accelerometer. The range should be greater than 0~5grms, and the resolution should not be less than 0.1grms.

3 Shaking table. The desktop vibrator with the circular cylinder stuck on it should be able to make the vibration frequency of 30kg material reach 5Hz or 60Hz, the acceleration is above 3grms, and the magnitude of the acceleration can be controlled. Before the test, an accelerometer should be used to calibrate the vibration of the shaker. When a cylinder full of samples is placed on the table, the acceleration of the vibrating table should be controlled at 2 grms ± 10%.

4. Insert the rod. Made of brass. For coal, the mass of the inserted rod should be adjusted to 88g (5kPa); for other materials such as iron ore, it should be adjusted to 177 (10kPa). If the sample contains coarse particles, it is recommended to use two insert rods of the same quality on the surface of the sample to avoid misjudgment.

5. Bracket. Should be placed in the middle of the cylinder, and guide the insertion rod with minimal friction.

6. Pounding. The required tamping pressure can be achieved by using spring-loaded and calibrated tamping rods (see Figure 7 for examples) or other structures. This kind of tamping rod can exert controllable pressure through the tamping head with a diameter of 30mm.


Technical Parameter

Voltage

Power

Vibration mode

Vibration Direction

Acceleration

Frequency

Control
mode

Running time

220V/
50Hz

300W

Mechanical

Vertical

20m/s2±10%

50/
60Hz

PLC+man-machine interface

Settable


Product Display

TML-B Insert Tester

  ※ Our HistoryQingdao Yosion Intelligent Technology Co.,Ltd. built in 2014, a equipment manufacturer and your solution for mining laboratory needs, integrating research & development, production, sales and service.※ Our FactoryRelying on its own factory and a strong R&D team, we can provide customers with quality products and customized services.Factory2FACTORY※ Our ProductOur main business is automated sampling & preparation system, sample preparation equipment, containerized laboratory, fire assay equipment & consumables, analysis equipment and lab deducting system, etc.※ Product ApplicationOur products are mainly used in major ports, entry-exit inspection system, research institutes, steel mills, mining companies, independent detection institutions and so on.※ Our CertificateMore than 20 invention and utility model patentsState-level high-tech enterprise awardISO certified
Similar Product Recommend