Welcome Customer !

Membership

XwbooElectrical & ElectronicsHigh Voltage ApplianceHigh Voltage TesterTransformer Oil Dissolved Gas Analyzer
  • $item.Title
  • $item.Title

Transformer Oil Dissolved Gas Analyzer

Wuhan Goldhome Hipot Electrical Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
High Voltage Tester
Place of Origin
HuBei, WuHan
I. Introduction The T ransformer oil dissolved gas analyzer is suitable for the determination of the dissolved gas content in the insulating oil of the power system. The total analysis of the dissolved gas content in the insulating oil can be completed by one injection, and the minimum detection...

I. Introduction

The Transformer oil dissolved gas analyzer is suitable for the determination of the dissolved gas content in the insulating oil of the power system. The total analysis of the dissolved gas content in the insulating oil can be completed by one injection, and the minimum detection concentration of acetylene is 0.1ppm.The instrument is equipped with large screen LCD display interface, menu type English operation, intuitive display and convenient operation.The instrument adopts double column parallel shunt system, equipped with thermal conductivity detector, double hydrogen flame detector and nickel catalyst converter, which can complete the analysis of H2, CO,CO2,CH4, C2H2, C2H4, C2H6,O2, C3H8, N2 in the transformer oil

1

II. Main function and configuration

Gas analyzing

it can detect 10 gas of transformer oil: H2, CO,CO2,CH4, C2H2, C2H4, C2H6,O2, C3H8, N2 in the transformer oil.

Item

Name

Performance description

Quantity

1) HM-GC20 DGA

1.

Host

Specification

Remark

1 set

2.

Hydrogen flame ionization detector

FID

●Detection limit: ≤1Pg

●Baseline noise: ≤1PA

●Baseline drift: ≤1PA/30min

●Linearity: ≥106

/Automatic ignition function/Wide range amplifier


2 set

3.

Thermal conductivity detector

TCD

●Sensitivity: S≥6000mV•ml/mg(n-hexadecane / isooctane)

●Baseline noise: ≤20μV

●Baseline drift: ≤30μV/30min

●Linearity: ≥104


1 set

4.

Nickel catalyst converter(Built-in nickel catalyst column)

Converter furnace temperature control range:0~400℃

Methylation conversion temperature:350℃~380℃;

Temperature control mode:Platinum resistance(100Ω);

Plus potential power:90W×2(Internal heat type);

Methane conversion rate:≥99%;


1 set

5.

sample injector

Fill column system(A two-column shunt system was used)


2set

6.

Chromatographic analysis column

GDX-502 specifications:4m*3mm


1pc

7.

Chromatographic analysis column

5A molecular sieve specifications: 1m*3mm


1pc

8.

Chromatographic analysis column

TDX-01 specifications: 1m*3mm


1pc

9.

work station

Three channels of the reverse control version of the transformer oil special workstation


1set

10.

spare part

sample needle, sampler, extension needle, pressure reduction valve joint, sample pad, sealant cap, two-way needle, etc


1set

2)Other configurations


1.

Generators

ZHHK-3 hydrogen gas generator

hydrogen purity :99.999%

Hydrogen flow:0~300ml/min

Traffic display:LED digital display

working pressure :0~0.5MPa(Set 0.3MPa at delivery)

Power Supply Voltage:~220V ±10% 50Hz

consumed power:130W


1pcs

ZHAK-2 Air generator

output flow :0~2000ml/min

output pressure:0~0.4MPa

system pressure:0.55~0.75MPa

Stable pressure accuracy:0.003 MPa

Work noise:<40Dbd(A)

Power Supply Voltage:~220V ±10% 50Hz

consumed power:150W


1pcs

2.

cylinder

argon(99.999%)Cylinder + decompression valve

By buyer

1set

3.

Standard gas

H2、CH4、C2H2、C2H4、C2H6、C3H8 N2 O、2CO、CO2 Gas component standard gas (including pressure reducing valve) 8L aluminum bottle


1bottle

4.

Deoxygenation tube

Adadsorption of trace oxygen in carrying gas


1set

5.

Multi-function degassing oscillator

1.Large-screen LCD display, English menu input, using microcomputer control, PID self-setting and fixed temperature control mode, the temperature control is more accurate

2.Mechanical transmission is fatigue resistant, vibration resistant, maintenance free and low noise

3.There is a plug thermometer socket for the operator to observe and compare

4.Small size, light weight, elegant appearance

5.Eight pcs 50 ml or 100ml syringes at the same time

6.Four pcs 250ml triangular bottles can be placed at the same time

7.temperature control :indoor -50℃±0.3℃

50℃~100℃±0.5℃

8.time control:Oscillation time: 0-59 points is optional

Still time: 0-59 points

Select the oscillation frequency: 275 times / minute ± 3 times


1set

6.

Computers and printers

Lenovo desktop computer 19-inch LCD screen


1set

III.Feature

HM-GC20 Host Feature

★Adopt advanced Gigabit / Gigabit Ethernet communication interface, built-in IP protocol stack, enables the instrument to achieve long-distance data transmission; convenient laboratory setup, simplify laboratory configuration, convenient analysis data management;

★The instrument internal design of 3 independent connection IP addresses, can be connected to the working computer (laboratory site), in charge of the computer (such as quality inspection department, production department, etc.), and senior management computer (such as the Environmental Protection Bureau, technical supervision Bureau, etc.), can monitor the operation of the instrument, and analyze the data results in real time when needed;

★The special workstation equipped with the instrument can support multiple chromatograph access at the same time, realize data processing and instrument reverse control, simplify document management;★The instrument can be connected to the manufacturer through the Internet to realize remote diagnosis, remote update, etc. (user Settings);

★The instrument is equipped with an 8-inch color LCD touch screen, support hot plug, can be used as a handheld controller;

★The instrument works in parallel to make it more stable and reliable, with various optional high-performance detectors, such as FID, TCD, ECD, FPD and NPD, to meet the analysis requirements of complex samples.

★The instrument adopts the modular structure design, and the later maintenance is simple and convenient.★The new microcomputer temperature control system, high temperature control accuracy, superior reliability and anti-interference performance; with eight completely independent temperature control output, can achieve 20 order program heating, with column box automatic rear door opening system, near room temperature control ability is improved, liter / cooling speed is faster;

★The instrument configuration of advanced electronic flow control unit (EFC), electronic pressure control unit (EPC) to realize the digital control of the gas path, greatly improve the stability of the instrument and the reproducibility of the analysis results;

★The chromatograph has a low-noise, high-resolution 24-bit AD circuit, and has a baseline storage, baseline deduction function.

★The standard workstation is suitable for WinXP, Win2000, Win7, Win8, Win10 and other operating systems.★The chromatograph microcomputer system with fully independent intellectual property rights has the standard protocol of MODBUS / TCP, and can connect with the DCS system.

Host Technical :

●Operation display: a 5.7-inch color LCD touch screen

●Temperature control area: 8 channels

●Temperature control range: 4℃ ~450℃ above room temperature, increment: 1℃, precision: ± 0.1℃

●Program heating order: 20

●Range lift rate: 0.1~60℃ / min

●Gas path control: full electronic pressure (EPC), electronic flow rate (EFC) control

●Range: 0~100Psi (pressure); 0 ~ 1000 mL/min (flow)

●Resolution: 0.01Psi (pressure); 0.01 mL/min (flow)

●External event: 8 channels; auxiliary control output 2 channels

●Sampler type: filling column inlet sample, capillary sample inlet sample, six-way valve gas inlet sample, automatic sample inlet device

●Number of detectors: 3 (maximum); the FID, TCD, ECD, FPD, and NPD are optional

●Start the incoming sample: manual, automatically optional

●Communication Interface: Ethernet: IEEE802.3

Generators technical

Hydrogen flame ionization detector (FID)

●Detection limit: ≤1Pg

●Baseline noise: ≤1PA

●Baseline drift: ≤1PA/30min

●Linearity: ≥106

Thermal conductivity detector(TCD)

●Sensitivity: S≥6000mV•ml/mg(n-hexadecane / isooctane)

●Baseline noise: ≤20μV

●Baseline drift: ≤30μV/30min

●Linearity: ≥104

Electron capture detector (ECD)

●Detection limits: ≤1×10-13g/ml(Propyl hexa-hexa-isooctane solution)

●Baseline noise: ≤0.03mV

●Baseline drift: ≤0.2mV/30min

●Linearity:103

●radioactive source :63Ni

flame photometric detector (FPD)

●Detection limits: (S)≤5×10-11g/s 、

(P)≤1×10-12g/s;Methyl parathion - absolute ethanol solution)

●baseline noise: ≤3×10-13A

● baseline drift : ≤2×10-12A/30min

● linearity range: to sulphur≥102、to phosphorus≥103

Backcontrol chromatography workstation:

The HM-GC-20 gas chromatography, different from a general gas chromatograph, requires a 10 / 100M adaptive network environment (Internet access services when remote data transmission is needed over the Internet) and a computer already equipped with English Windows2000, XP, win7, win8 operating systems.

Below is the working interface.

1659495622587


Technical indicator :

Analytical detection limits of dissolved gases(uL/L)

H2

O2

CO

CO2

CH4

C2H4

C2H6

C2H2

1

1

2

2

0.05

0.05

0.05

0.05

───────────────────────

Items Reserved time Gas potency peak area

───────────────────────

1 0.455 H2 100 36392

2 2.040 CO 70 1529926

3 12.922 CO2 300 8835319

4 17.572 CH4 10 213463

5 19.316 C2H6 10 354775

6 19.823 C2H4 10 402530

7 20.435 C2H2 5 192036

───────────────────────

Total hydrocarbon concentration :35

Three-ratio coding:100


  Wuhan Goldhome Hi pot Electrical Co.,ltd(short for Goldhome Hi pot) was established in 2008, its predecessor was state-owned third industry enterprises, one of the earliest enterprises specially in develop, design and manufacture high voltage testing equipment in China.In 2016, merged with Wuhan Sang Electric Co., Ltd. , we realize advantageous compartmentalize and resources reorganization.Now it has become a high-tech enterprise integrating R&D, production, marketing installation and commissioning.1.our-historyOur FactoryGoldhome Hi pot is located in Huading Mould Industrial Park, Economic and Technical Development Zone, Wuhan City, Hubei Province, China, working area more than 4000 square meters.As a high-tech enterprise, we are supported by natural advantages from various research universities in Wuhan city. Goldhome Hi pot works closely with professors from State Grid Power Science Research Institute, Electrical Engineering Colleges of Wuhan University and other scientific research institutions, constantly improving technology and updating products . Now Goldhome Hi pot has more than 20 patented technologies, and many software Copyrights!2.our factory-1product and product applicationOur ProductOur advantage products included AC Resonant Test System, PD Free Test System, AC/DC Hi pot Tester, Primary Current Injection, VLF Hi pot Tester, transformer tester,impulse generator,Transformer oil tester,HV Switch gear Tester ,Insulation Tester,ground Resistance Tester,cable fault locator,relay test set,CT PT analyse,arr ester tester and sf6 gas analyzer,etc.Product ApplicationAll the performance indexes of above testing equipment can reach the leading level in China, widely used in power supply bureau, power plant, power construction, railway, petroleum, chemical industry, metallurgy, coal and other industries.In recent years,our factory continues to expand overseas markets, some competitive products are already exported to American and European countries, Africa, Middle East, etc , and well praised by customers.product applicationOur CertificateAll product process is strictly in accordance with international standards and power industry regulations. And the products are through the national, provincial power authorities testing, as well as CE certification! At present,0ur company has received ISO9001:2015 quality management system certification, ISO14001:2018 occupational health and safety management system certification, and ISO14001:2015 environmental management system certification,and also had got SGS certification.We has more than 20 patented technologies,such as The utility model patent of a frequency conversion series resonance test device,The utility model patent of Lightning impulse voltage testing equipment,The utility model patent of DC high voltage generator,The utility model patent of microcomputer relay protection tester,The utility model patent of High voltage switching characteristic tester., etc.4.certificateoverseas market & our serviceOverseas MarketOur products are sold to Europe, Asia, Africa, North and South America and Oceania, Middle East, etc.and are well received by customers.We had won the bids for the purchase of high-voltage no-partial discharge test equipment from the Polish state-owned insulator production plant, the Myanmar National Grid cable fault tester purchase project, and the high-voltage test equipment purchase project of a Russian power installation and test engineering company.We also sell to end customers, and a single device can also be sold. For example, there are power maintenance and installation companies in Indonesia, South Africa, Denmark, and South Korea, and universities and research institutions purchase and use our test equipment.At the same time, our sales targets also include agencies. At present, we already have cooperated with agents in Singapore, Israel, Mauritius , etc.We insist on providing customers with first-class products and first-class services with reliable product quality and perfect service team.5market-1Our service1.Strict factory testAll products will be assembled and test strictly accord with our product process standard. All qualified products will be issued factory release reports and certificate labels.Defect products or non-qualified products won’t be allowed to make deliver.2.Providing technical materialsDuring the product acceptance, we provide the related manual sheets, packing list,qualified certificate labels, factory test reports and other technical documents.3. Support technical guidanceWe also provide the training for the operators. Complete training includes the skilled operations of our equipment, maintenance and troubleshooting . it also ranges the commissioning and test of our products at site!After-sale service1.First-use responsibility systemAfter the product is delivered, the technician can guide the operation at site if the client requires, and be responsible for the first use of each part2.One year warrantyAll products warranty is 1year, life-time maintenance .During the warranty period, if any defects or damaged because of product’s quality, maintenance or replacement can be provided with free charge in order to let our client’s satisfied !3.TroubleshootingIf the troubleshooting is not difficult, and client can handle with it by themselves, we can offer the call-on line guide within 1 hour!If the troubleshooting is difficult to handle with for client, we can promise that the best solution can be provided within 24 hours!
Similar Product Recommend