Welcome Customer !

Membership

XwbooInstrumentationTesting MachineTransformer Testing MachineTransformer Winding Resistance Test Set
  • $item.Title
  • $item.Title

Transformer Winding Resistance Test Set

Wuhan Goldhome Hipot Electrical Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Transformer Testing Machine
Place of Origin
HuBei, WuHan
Testing current:1mA, 10mA, 1A, 5A, 10ATesting range:1mA 100Ω~20kΩ 10mA 10Ω~2kΩ 1A 1Ω~20Ω 5A 1Ω~4Ω 10A 100μΩ~2Ω

HM5002-10A Transformer winding resistance test set


Brief Introduction


This Transformer Winding Resistance Test Set is a high precision, new generation, light weight large output current and micro-processor controlled tester. It replaces traditional electrical bridge method and pressure drop method for measurement of DC resistance, adops with rapid direct current resistance detector. It is an ideal device for measuring transformer windings and big power output inductor equipment.

The DC resistance test of the transformer winding is an indispensable test item after the transformer is handed over, overhauled, and changed the tap switch.


Advantage


1.Our Transformer Winding Resistance Test Set operates on the typical four-wire system measurement,can be more precise when measuring resistance values, especially that of low resistance.

2.Possible to save 255 testing data, which will not lose when it is reset or out of electricity. All the data saved can be printed.

3.Big screen display, menu operation, friendly interface, be clear at a glance, convenient operation.

3.With audible alarm automatic discharge and discharge instructions, and other functions.

4.The central control unit imposes a constant and precise current to an external load which is to be measured, after analyzing the data acquired (including testing voltage, current testing current and so on), you can get the real resistance value.


Specification


Items

Technical Parameters

Notes

Testing current

1mA, 10mA, 1A, 5A, 10A


Testing range

1mA 100Ω~20kΩ
10mA 10Ω~2kΩ
1A 1Ω~20Ω
5A 1Ω~4Ω
10A 100μΩ~2Ω


Testing precision

±(0.2%full-scale± 2 digital)


Display mode

128×64dot-matris

Resistance is displayed by 41/2 bit

Highest Resolution ratio

0.1μΩ


Power supply

AC 220V±22V,60Hz±2 Hz

Fuse 5A

Maximum

power dissipation

220W

Working environment

Temperature:0°~40°
Relative humidity:&≤80%


The structure of the panel is as following


Mainly consists of three parts for Transformer Winding Resistance Test Set: the output, display and keyboard control, and the printer.

1


Factory release test for HM5002-10A DC Resistance Tester



1


Service and Support



1.Factory Release Test

Products are operated in correct way strictly according to production process .

About qualified product, inspector will issue factory test report and certification of quality.

Sub-quality products are prohibitted to leave factory.

2.Hand-over Technical Documents

Wuhan Goldhome Hipot Electrical Co.,ltd will afford Operation Manual, Packing List, Cerficiation of quality while in prdoucts acceptance.

3.Technical Guidance

After delivering device customers,Wuhan Goldhome Hipot Electrical Co.,ltd can provide systematic technical training, to ensure operator know the operation produce maintenance and trouble-shooting , and able to make test on site.


After-sale Service



1.First Time Use guidance

For the first time use, technical staff will guide customer how to make testing at site.

2.Three-years Warranty

The warranty period of all equipment is three years, lifetime maintenance.

During warranty period, free maintenance or replacement are provided timely for any quality problem . Finally we will afford customer a satisfactory solution, whether repair , replace or return it back .

3.Trouble-shooting

fault that users can solve by themselves, we guarantee to give timely telephone guidance and bear the necessary cost .

If meet any fault not impossible to be solved by end-user, we will afford the best solution within 24 hours . Produce will be repaired within 10 days and delivery back to customer.


Company Profile



Wuhan Goldhome Hipot Electrical Co.,ltd(short for Goldhome Hipot) was established in 2008, ISO certified factory in R&D and manufacture AC/DC hipot tester, transformer testing device, CT/PT analyzer , Circuit breaker tester, insulation resistance tester set , earth continuity tester, protection relay tester as well as transformer oil testing equipment.

2

  Wuhan Goldhome Hi pot Electrical Co.,ltd(short for Goldhome Hi pot) was established in 2008, its predecessor was state-owned third industry enterprises, one of the earliest enterprises specially in develop, design and manufacture high voltage testing equipment in China.In 2016, merged with Wuhan Sang Electric Co., Ltd. , we realize advantageous compartmentalize and resources reorganization.Now it has become a high-tech enterprise integrating R&D, production, marketing installation and commissioning.1.our-historyOur FactoryGoldhome Hi pot is located in Huading Mould Industrial Park, Economic and Technical Development Zone, Wuhan City, Hubei Province, China, working area more than 4000 square meters.As a high-tech enterprise, we are supported by natural advantages from various research universities in Wuhan city. Goldhome Hi pot works closely with professors from State Grid Power Science Research Institute, Electrical Engineering Colleges of Wuhan University and other scientific research institutions, constantly improving technology and updating products . Now Goldhome Hi pot has more than 20 patented technologies, and many software Copyrights!2.our factory-1product and product applicationOur ProductOur advantage products included AC Resonant Test System, PD Free Test System, AC/DC Hi pot Tester, Primary Current Injection, VLF Hi pot Tester, transformer tester,impulse generator,Transformer oil tester,HV Switch gear Tester ,Insulation Tester,ground Resistance Tester,cable fault locator,relay test set,CT PT analyse,arr ester tester and sf6 gas analyzer,etc.Product ApplicationAll the performance indexes of above testing equipment can reach the leading level in China, widely used in power supply bureau, power plant, power construction, railway, petroleum, chemical industry, metallurgy, coal and other industries.In recent years,our factory continues to expand overseas markets, some competitive products are already exported to American and European countries, Africa, Middle East, etc , and well praised by customers.product applicationOur CertificateAll product process is strictly in accordance with international standards and power industry regulations. And the products are through the national, provincial power authorities testing, as well as CE certification! At present,0ur company has received ISO9001:2015 quality management system certification, ISO14001:2018 occupational health and safety management system certification, and ISO14001:2015 environmental management system certification,and also had got SGS certification.We has more than 20 patented technologies,such as The utility model patent of a frequency conversion series resonance test device,The utility model patent of Lightning impulse voltage testing equipment,The utility model patent of DC high voltage generator,The utility model patent of microcomputer relay protection tester,The utility model patent of High voltage switching characteristic tester., etc.4.certificateoverseas market & our serviceOverseas MarketOur products are sold to Europe, Asia, Africa, North and South America and Oceania, Middle East, etc.and are well received by customers.We had won the bids for the purchase of high-voltage no-partial discharge test equipment from the Polish state-owned insulator production plant, the Myanmar National Grid cable fault tester purchase project, and the high-voltage test equipment purchase project of a Russian power installation and test engineering company.We also sell to end customers, and a single device can also be sold. For example, there are power maintenance and installation companies in Indonesia, South Africa, Denmark, and South Korea, and universities and research institutions purchase and use our test equipment.At the same time, our sales targets also include agencies. At present, we already have cooperated with agents in Singapore, Israel, Mauritius , etc.We insist on providing customers with first-class products and first-class services with reliable product quality and perfect service team.5market-1Our service1.Strict factory testAll products will be assembled and test strictly accord with our product process standard. All qualified products will be issued factory release reports and certificate labels.Defect products or non-qualified products won’t be allowed to make deliver.2.Providing technical materialsDuring the product acceptance, we provide the related manual sheets, packing list,qualified certificate labels, factory test reports and other technical documents.3. Support technical guidanceWe also provide the training for the operators. Complete training includes the skilled operations of our equipment, maintenance and troubleshooting . it also ranges the commissioning and test of our products at site!After-sale service1.First-use responsibility systemAfter the product is delivered, the technician can guide the operation at site if the client requires, and be responsible for the first use of each part2.One year warrantyAll products warranty is 1year, life-time maintenance .During the warranty period, if any defects or damaged because of product’s quality, maintenance or replacement can be provided with free charge in order to let our client’s satisfied !3.TroubleshootingIf the troubleshooting is not difficult, and client can handle with it by themselves, we can offer the call-on line guide within 1 hour!If the troubleshooting is difficult to handle with for client, we can promise that the best solution can be provided within 24 hours!
Similar Product Recommend