Membership
Help
Shenzhen Jiwei Automations Ltd.
Shenzhen Jiwei Automations Ltd.
Tube-11 is the first made-in-China Vibrating Rod Level Switch that is designed with double vibrating elements, it is suitable for majority granular, powdery and fine-grained bulk solids, such as PVC, sodium hydroxide, lime, sand, soil, coal, dust, sugar, grain, bean, etc. The density of medium can be as low as 0.02g/cm³. It is highly reliable and with industry-leading performance and specifications.
The probe of Tube-11 vibrating rod level switch is designed with double vibrating tubes. The inner vibrating tube nests with the outer vibrating tube. When resonant frequency of inner and outer vibrating tubes is finely adjusted to the same value, both reliability and sensitivity of the vibrating rod level switch are extremely high. Therefore, the measurable medium density can be as low as 0.02 g/cm³. In this product piezoelectric devices are utilized for vibrating drive and detection. When vibrating frequency of the inner and the outer vibrating rod is finely adjusted to the same value, it results in the resonance of both inner and outer vibrating tubes. Until the vibrating rod comes in contact with measured material, resonant frequency of the outer vibrating tube will shift, therefore destroy the resonant condition. Vibrating amplitude of the probe will substantially decease. The output signal from piezoelectric detection device will also decrease accordingly. An integrated electronic circuit is designed to analyze the amount of decrease and output a switch signal.
● First made-in-China Vibrating Rod Level Switch that is designed with double vibrating tubes.
● Strong anti-corrosion probe thanks to the probe material selection, such as 316L and 318 S13.
Applicable medium | Types of the medium | Granular or powdery solids① |
Density | ≥0.02g/cm³ | |
Probe data | Vibrating frequency | ~360Hz |
Probe length | 125mm | |
Probe diameter | 16mm | |
Switching Delay | When immersed | 0.5s |
When laid bare | 1s | |
Power Supply | Relay output | 20~253V AC/20~72V DC |
Two-wire | 10~36V DC | |
Maximum Power consumption | 8VA (AC); 1.5W (DC) | |
Output | Relay output | DPDT, 5A/253V AC / 24V DC |
Two-wire | 8mA/16mA, Alarm<2.3mA | |
Working environment | Process pressure | -1~16bar |
Process temperature | Regular: -50~150℃ High temperature: -50~250℃ Ultra-high temperature: -50~400℃ | |
Ambient temperature | -40~80℃ | |
Storage and transport temperature | -40~80℃ | |
Cooling system data (for Ultra-high temperature only) | Air intake tube | 6×4 (Outer diameter 6mm) PU tube |
Cooling air pressure | 0.8MPa | |
Min. cooling air flow rate | To be adjusted② | |
Overvoltage protection | Relay output | Category III, class I |
Two-wire | Category III, class II | |
Approvals | Protection rating | IP66/IP67 |
Explosion-proof types | Flameproof Enclosure: Ex d IIC T6~T1 Gb, Ex tD A21 IP66 T80~440℃ | |
Intrinsic Safety: Ex ia IIC T6~T1 Ga, Ex iaD 20 T85~450℃ | ||
CE | LVD and EMC certificates | |
Materials | External Housing | Aluminum alloy |
Ground terminal | 316L | |
Process fitting | 316L | |
Probe | 316L、318 S13 | |
Process seal | Klingersil C-4400 |
● Silo with mixture of CaSO4 and CaSO3 resulting from semi-dry desulfurizing reaction at a coal power plant.
● Powders and particles with process temperature not exceeding 250 ℃.