Membership
Help
Jinan Focor Machinery Co.,Ltd
Jinan Focor Machinery Co.,Ltd
| Brief Introduction |
Name: Twin boom jumbo
Model: FK20-2BCD
Power of Diesel engine: 60 KW
Power of Electric motor: 30 KW
Section(b×h): 2.5×2.5~5.5×4.5 m
Dimensions: 8240×1290×2450 mm
| Product Introduction |
FK20-2BCD twin boom jumbo is mainly used to drill blast holes for tunneling constructions in mining
Main features:
(1) The jumbo has auto-stop and anti-jamming function, auto-stop at end-point, auto-wash, working with diesel engine can improve the working environment;
(2) Drill jumbo has flexible hydraulic rock drill can work on the section, roof, side and floor
(3) It can drill bolt hole conveniently with our patent impeller.
(4) This jumbo has a small body, runs with the crawler, can climbing flexibly on 14° slope.
| Configuration And Technical Parameters |
Item | Parameter | |
Body | Overall size (L×W×H) | 8240×1290×2450 mm |
Hole diameter | Φ33 ~Φ102 mm | |
Drill pipe length | 3050 mm | |
Hole depth | 2.7 m | |
Drilling speed | 0.8~2 m/min | |
Section (W×H) | 2.5×2.5~5.5×4.5 m | |
Climbing capability (smooth-riding surface) | 25% | |
Total weight | ≈8500 kg | |
Walking aids | Engine power | 30 KW |
Running speed | 2.5 km/h | |
Min. turning radius | 4.5 m | |
Boom | Up and down | up55°, down16° |
Swing boom | inner14°, outer47° | |
Compensation | 1500 mm | |
Rotation | positive180°, negative180° | |
Thruster | Pitching | down105°, up15° |
Swing angle | inner45°, outer45° | |
Total length | 4150 mm | |
Distance | 2700 mm | |
Max. Propulsion | 9000 N | |
Impacting oil pressure | 30~45 L/min | |
Impacting flow | 14~16 Mpa | |
Torque | 60~260 N·m | |
Impacting energy | 100~200 J | |
Impacting frequency | 34~67 Hz | |
Hydraulic system | Impacting loop pressure | 16Mpa |
Drill pipe rotation loop pressure | 15Mpa | |
Compensation loop pressure | 10Mpa | |
Boom loop pressure | 20Mpa | |
Propulsion loop pressure | 11Mpa | |
Leg extension loop pressure | 21Mpa | |
Running loop pressure | 20Mpa | |
Air system | Drop tank air pressure | 0.03 Mpa |
Blowing hole air pressure | 0.7 Mpa | |
Rock drill air pressure | 0.4 Mpa | |
Water system | Rock drill water pressure | (≥) 1.2Mpa |
Colder water pressure | (≤) 0.6Mpa | |
Electric system | Supply voltage | 380 V |
Electric motor rotation speed | 1470 r/min | |


| Main Features |

| Product Qualification |

| Other Underground Mining Machines We Supply |

| Latest News - |
After the hydraulic circuit is formed, advance or retreat, turn or stop of the rock drill can be controlled through the control valve 4. When the rock drill stops, that is when the direction valve 4 is at the middle position,the travel hydraulic circuit cannot be formed, and therefore, the travel brake 7 lost pressure. Brake 7 is open, the spring is in a state of compression.
The pressure protection of running circuit is fulfilled by two overflow valves 5 and 6. The maximum travel pressure would not exceed the set pressure (21MPa). When the jumbo suddenly braked, because of inertia function, at this moment, contrarily, the electric motor 8 became a pump to work, the oil pressure in the chamber rapidly increase and, relative vacuum zone (create negative pressure) is formed in another chamber, the high pressure chamber overflows through overflow valve 5 or 6 (When suddenly brake during advancing, one overflow valve overflows, suddenly brake when retreating, another overflow valve overflows), oil compensate in two part of vacuum zones through check valve 9 or 10 (suddenly brake during advancing, one direction valve compensates oil, during retreating, another direction valve compensates oil ) thus the travel circuit plays the role of protection and avoid failure.
The propulsion pressure of the rock drill is adjusted by the gradually drilling valve but its retreat pressure is determined by the overflow valve 2. The highest pressure will not exceed its set pressure (17.5MPa).
2.4.5 The hydraulic circuit for travel of the rock drill
When the main pump supplies pressurized oil to the system, the operation direction valve 4 can immediately control the rotation of the travel electric motor. Only when the percussion valve 2 is at the middle position, the travel hydraulic circuit can be formed.
After the hydraulic circuit is formed, advance or retreat, turn or stop of the rock drill can be controlled through the control valve 4. When the rock drill stops, that is when the direction valve 4 is at the middle position,the travel hydraulic circuit cannot be formed, and therefore, the travel brake 7 lost pressure. Brake 7 is open, the spring is in a state of compression.
The pressure protection of running circuit is fulfilled by two overflow valves 5 and 6. The maximum travel pressure would not exceed the set pressure (21MPa). When the jumbo suddenly braked, because of inertia function, at this moment, contrarily, the electric motor 8 became a pump to work, the oil pressure in the chamber rapidly increase and, relative vacuum zone (create negative pressure) is formed in another chamber, the high pressure chamber overflows through overflow valve 5 or 6 (When suddenly brake during advancing, one overflow valve overflows, suddenly brake when retreating, another overflow valve overflows), oil compensate in two part of vacuum zones through check valve 9 or 10 (suddenly brake during advancing, one direction valve compensates oil, during retreating, another direction valve compensates oil ) thus the travel circuit plays the role of protection and avoid failure.
The pressure of the system is controlled by the gradually drilling valve.
Controlling of the percussion pressure can reach the aim of control the percussion energy. When propulsion completed, the propulsion oil circuit discharges, the sequence valve is reset under the action of spring, the small percussion oil cylinder lost pressure and is reset under the action of its spring force, and the percussion oil circuit of the rock drill is cut-off, percussi9n stops. The whole process of percussion and stopping of the rock drill are all controlled by high or low oil pressure of the propulsion system and high or low water pressure of the water supply system and it is automatic process.