Welcome Customer !

Membership

XwbooInstrumentationEnvironmental Test ChamberOther Test ChambersTWO ZONE TEMPERATURE TEST CHAMBER / KMT-408
  • $item.Title
  • $item.Title

TWO ZONE TEMPERATURE TEST CHAMBER / KMT-408

Guangdong Komeg Industrial Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Other Test Chambers
Place of Origin
GuangDong, DongGuan
Temperature Test chamber are widely used in testing various types of materials for their tolerances of heat, cold. It is applicable for quality inspection for all types of electronic products, electric appliance, and products from communication ,instruction , auto, plastic, metal, food, chemical, building materials, medical and aerospace industries. Unique shape with high performance material, whether youre testing aerospace products, electronic instrumentation, materials, electrical and electronic products a......

Introducion:

Reliability test for prouduct

Temperature test chamber can simulate an environment and create effects in a range of temperature coditions for the purpose of testing the reliability of a prouduct or material. Widely used in Automotive industry such as ECU/electric part, PCU/inverter, Alternator/ISG, Moter or other Vehicle Components.Besides,it is suitable for high temperature testing of power batteries,electronics,machinery and other products,components and materials under simulated temperature changes.

20200528113803254.png

Make your own chamber with a variety of options

Extended choice of options fitting to your testing. Select your chamber from the door, refrigeration system, instrumentation, size ! Order only what you need.

20200528113803182.png

Main Technical

Water-cooled. The specifications measurement in the environment temperature at + 25 ℃ without load

volume

408L*2

1. Temperature

1.1 Temp. range

-70℃~+150℃

1.2 Temp. deviation

≤±2.0℃

1.3 Temp. fluctuation

±0.5℃

1.4 Heating up rate

From -40℃ to +85℃, linear, ≧200℃/h, with load of 300kg, No Heat Emission

1.5 Cooling rate

From -40℃ to +85℃, linear, ≧200℃/h, with load of 300kg, No Heat Emission

2. Floor capacity

300KG/m2

3. Full load

10 PV Modules to be loaded in a vertical orientation.

Single panel max. size of 2000*1000*50mm.

Total weight of 300KG.

Temperature and humidity performance test is in accordance with the relevant provisions of the IEC60068 standard

measurement; sensor placed in the unit outlet.According to national test standard: GB/T 5170.2, use 9 test point

calibration, as below:

Body Structure

Overall structure and chamber is composed of three parts as below.Insulation box, separate refrigeration units, and electrical

control cabinet.

1. Body dimensions

Workplace volume: W 700× H 800 × D 750 mm,Exterior size: W 900 × H 1960 × D 1820 mm,

2. Insulation Box

※ wall material: high-quality carbon steel※ inner wall material: SUS304 # matte stainless steel plate※

Insulation materials:

100mm rigid polyurethane foam insulation layer + glass fiber.

3. Door

Double door (according to design), with observation window (the size depend on final design)

4. Lighting Device

Moisture-proof lighting, with explosion-proof lampshades.

5. Cable port

φ100mm*1 located on both side of chamber, with rubber stopper

6.Electric control box

Total power circuit breaker, over-temperature protection.

7. Control model

This device is Cascade compression refrigeration

We use intellectual cooling control: PID will control solenoid-valve and heater on/off to adjust cooling or heating capacity according to temperature and loading requirements and status inside the chamber. Only cooling or only heating will be activated to get temperature balance to save energy

8. Heating

High quality nickel-chromium alloy wire electric heaters,Non-contact control mode(SSR)

9. Water outlet hole

Available for drain the condensate water

10. Water purifier

Pure water device, 1 pcs, please provide 1 ~ 2 kg/cm2 tap water

11. Water supply system

Pump to enhance automatic water supply

12. Humidification

Stainless steel corrosion-resistant electric evaporative humidification

13. Humidity sensor

High accuracy Vaisala electronic humidity sensor

FAQ:

Q1 : Can you customize the product?

A: Yes, we can customize any products according to requirements.

Q2 : How to choose the most suitable products?

A: Our professional team will give you the best suggestion, just be patiently to tell us the information about the parameters your required.

Q3 : Can you arrange installations and commissioning in our lab?

A: Firstly, for standard chamber we had 3-5 days commissioning before shipping , you just need link power in your lab, then can start to operate;

Secondly; we had detailed operation manual with chamber , any problems you can find and solve in it;

Thirdly, some of customized chambers we should to install and teach your team to operate.

20190924103605513.jpg

20190924103605363.jpg

20190924103606671.jpg

  A 32-year specialist in advanced environmental test equipmentKOMEG Technology Industrial is famous for its KOMEG star brand of environmental test equipment in China since 1990.KOMEG has specialized in climatic test chambers, thermal shock test chambers, walk-in chambers,burn-in rooms, and aging test chambers, drying ovens, salt spray testers, medical laboratory equipment, etc.KOMEG factory is located in Dongguan, covering an area of 15,000 sqm, with over 200 employees including 26 R&D engineers.KOMEG also has offices in Shenzhen and Songshan Lake National Hi-Tech Industrial Development Zone.Born for quality,test for futureBorn for quality, test for future is always our philosophy. Better idea, better design and better quality is our aim.KOMEG strives for continuous innovation, releasing no less than 5 new designs each year. Our strong R&D team and skilled workers are the keys to our success.No matter it is a standard or custom-made project, we have rich experience in handling such so that customers worldwide can benefit more from KOMEG when working with us. And to ensure your specific test standards are met, the key components and parts are using an imported famous brand. That's why SGS, KONICA MINOLTA, SENKO, Midea, TCL, and Huawei are among our long-term clients.Why Choose UsBeing a first-class supplier and reliable partner, we are certified to ISO 9001 and got CE approval for all our products. All equipment is 7*24 hour tested before delivery. That explains why KOMEG is the private brand of choice for many well-known brand enterprises, and also one of the very few designated suppliers who were recognized by many top 500 enterprises.Let KOMEG's 32 years of professional experience work for you too. And meanwhile, we look forward to helping you.Distributors welcomed, Inquire today to get your order started.
Similar Product Recommend