Welcome Customer !

Membership

XwbooElectrical & ElectronicsElectric Heating EquipmentElectric HeaterUF-06A-I
  • $item.Title
  • $item.Title

UF-06A-I

YONGKANG YUELON ELECTRONIC EQUIPMENT CO.,LTD

Model
Nature of the Manufacturer
Manufacturer
Product Category
Electric Heater
Place of Origin
ZheJiang, JinHua
UF-06A-I
Specifications
Model UF-06A-I UF-06A-II UF-06AB-III
Working frequency 200-500KHZ 200-700KHZ 0.5-1.1MHz
Max input power 6.6KW 6.6KW 6KW
Max.input current 30A 30A 30A
Heating current 3-30A 3-30A 3-28A
Input voltage 220 V single-phase, 50/60Hz
Duty cycle 80%
Auto timer 0.1-99.9seconds
Waterpressure ≥ 0.2Mpa
Water flow ≥3L/min
Water temperature <35°C
Generator size
heating head size
520x260x450mm 520x260x450mm 520x260x450mm 140x93x140mm
N.W. 25KG 25KG 18/3.5kg
Packing size 690x385x630mm 690x385x630mm 690x385x760mm
Packing weight 48KG 48KG 52KG
Main Characteristics

With high frequency up to 1100KHZ the quenching thickness can be controlled lower than 1mm, and very thin and tiny parts can be easily heated.

MOSFET and current inverting technologies have been used; higher reliability and lower maintenance cost.

Constant current or constant power status can be selected accordingly to achieve higher heating efficiency;

Display of heating power and heating current and oscillating frequency.

Simple to install , installation can be done by unprofessional person very easily;

Light weight, small size;

different shape and size of induction coil can be changed easily to heat different parts.

Advantages of the model with timer: the power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.

The separated small heating head is especially suitable for the applications in which the parts are stationary and the heating head is moved to fit the place.

Advantages and applications of models with timer function:

heating power, retaining power, heating time, retaining time can be preset and adjusted, this makes it possible to control the heating curve and heating time.

it is suitable to use in the repeated heating or high speed heating of small parts.

when using in brazing, with proper timing parameters, rapid heating and retaining can be achieved to keep the temperature while the brazing material is melted and then to let the brazing material spread smoothly to form good joint.

Advantages and applications of UF-06AB-III with heating head:

the heating head weight is 3.5KG, and size is 140 x 140 x 93mm, with 2 meters long cable between generator.

the light and small heating head is especially suitable for the applications in which the parts are stationary and the heating head is moved to fit the place.

Main Applications:

brazing of hard alloy saw blade and machining tools.

heat treatment of small parts.

Quenching of the saw tip.

Shaping of the small driller.

Heating of wire smaller than 1mm.

fine steel wires (such as those used in dentistry) annealing.

small precision shaft quenching.

Floating melt for institute or college research and so on.

  YUELON is dedicated to the induction heating industry. Founded in 1998, YUELON has been a premier manufacturer of induction heating machines and systems in China. Precision induction heating solutions are our specialty, Use induction heating to improve the efficiency and effectiveness for industrial heating process. that are used for application such as brazing, annealing, quenching, forging, melting, shrink fitting etc.YUELON induction heating machines are Available from 4KWto 2000KW deliverable output power with 1KHZ to 1.1MHZ operating frequency range.
You May Like
Similar Product Recommend