Welcome Customer !

Membership

XwbooEnvironmental ProtectionMembrane & Membrane ModuleReverse Osmosis MembraneULP series
  • $item.Title
  • $item.Title

ULP series

N-Tech Environmental Protection Science And Technology (Changzhou) Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Reverse Osmosis Membrane
Place of Origin
JiangSu, ChangZhou

N-Tech Environmental Protection Science And Technology (Changzhou) Co., Ltd.

Contact

Ms. Zhi

Phone

Fax

An ultra-low pressure energy-saving membrane product suitable for the research and development of low salinity (TDS≤1500mg/L) water quality. It has the characteristics of operating under extremely low operating pressure and still maintaining high salt rejection. Products are widely used in the fields of tap water, surface water desalination and purification.

Product Features

  • High salt rejection and large water flux
  • Unique technical formula, the film surface is white and defect-free
  • Precise control of production to ensure product consistency during mass production
  • Unique post-processing technology for longer service life

 

Applicable scenarios:

An ultra-low pressure energy-saving membrane product developed for low salinity (TDS≤1500mg/L) water quality. It has the characteristics of operating under extremely low operating pressure and still maintaining high salt rejection. Products are widely used in the fields of tap water, surface water desalination and purification.

 

ModelAverage water production
(GFD)
(m3/d)
Stable salt rejection
(%)
Effective film area
(ft2)
Water inlet screen thickness
(mil)
ULP-8040-HF12000 (45.6)9940031
ULP-8040-HR10500 (39.8)99.340031
ULP-40403000 (11.3)997831
Test conditionTest pressure: 150psiTest solution temperature: 25℃  
Solution concentration: 1500ppmNaClPH value of test solution: 7-8  
15% recovery rate   

Note: Limits of use: Maximum operating pressure is 300psi
The product desalination rate is the stable desalination rate after testing under the standard conditions of 30min; the water production is based on the water production index of NaCl as the test liquid, and the water production fluctuation range is +15%.

 

Notes:

The water yield listed in the table is the average value, and the water yield error of a single membrane element is within ±20%.

The test conditions are not the best conditions for use, please consult our technical staff for details.

The membrane element is equipped with a pressure vessel with a nominal inner diameter of 2.5/4/8 inches.

Before the RO system starts, the system pretreatment and debugging, membrane element filling, instrument calibration and other system tests should be completed.

The water inlet of the membrane element should gradually increase the pressure, and the time to increase the pressure to the normal operating state should not be less than 60 seconds.

The newly installed membrane should be rinsed at low pressure for more than two hours, and the RO pure water should be discharged.

Be careful to avoid back pressure on the product water side, the pressure on the product water side is not greater than 5PSI of the pressure on the water inlet side.

All membrane elements have been rigorously tested before leaving the factory, and are packaged with dry film technology, and the outer packaging is a reinforced cardboard box.

Do not add any chemicals that affect the membrane elements during storage and operation. Consult the latest version of the technical manual, design guide, or consult a technical expert.

If the customer does not operate according to the standard process, he will not bear all the consequences arising therefrom.

Due to technical improvements and product updates, product information may be changed at any time without prior notice. Please pay attention to the latest product information.

The data and information provided by the company in this material are obtained through long-term experiments. We believe that these data and information are accurate and effective. However, due to the user's use methods, conditions of use and applicable laws, it may vary from time to time. It is not responsible for the consequences and losses caused by the use of the data and information of this product and its samples, regardless of whether it is used alone or in conjunction with other products. It is recommended that users conduct their own experiments to determine their safety and whether they are suitable for the user's specific use. Purpose.

 

Important Information

1. Before the membrane element is installed, the system and pipeline should be thoroughly cleaned to ensure that there is no damage to the membrane caused by any mechanical impurities.

2. Before running the system, it should be ensured that the preprocessing and debugging are completed.

3. During the startup, shutdown, cleaning and other processes of the system, the water inlet should be slow, from low pressure to high pressure, from low flow to large flow, to avoid impact damage to the membrane element due to the instantaneous increase of pressure and flow.

4. The membrane element should always be kept wet once water enters.

5. Avoid back pressure on the permeate side at all times.

  N-Tech Environmental Protection Science and Technology (Changzhou) Co., Ltd. (hereinafter referred to as "N-Tech") was established in November 2016 and is located in Wujin High-tech Industrial Development Zone, Changzhou City, Jiangsu Province, specializing in high-performance water Design, research and development, production, sales and service of treatment membranes.In 2016, the company introduced American experts and technical teams, based on the introduction of digestion and independent innovation, and established an international R&D team with strong technical strength. There are 3 foreign experts, 5 returnees with Ph.D., and more than 30 master and undergraduate technical talents. The product technology is at the international advanced level, and the performance indicators reach or even exceed the level of similar products in the United States, covering 6 types of seawater desalination reverse osmosis membranes, etc., which are used in seawater desalination, sewage treatment, industrial pure water, special separation and other fields.
Similar Product Recommend