Welcome Customer !

Membership

XwbooEnvironmental ProtectionAir Purification EquipmentHumidifierUltrasonic Spray Nozzle Coating Technology for Precision Spray Coating System
  • $item.Title
  • $item.Title

Ultrasonic Spray Nozzle Coating Technology for Precision Spray Coating System

Hangzhou Lanben Trade Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Humidifier
Place of Origin
ZheJiang, HangZhou
low flow spray ultrasonic atomizer nozzles focus micron and sub-micron droplets onto small parts from various viscosity solutions with very little overspray. Nozzles come in two styles, flat and wide spray tip. Nozzles are ideal for focusing droplets with our Pin Point Spray Shapers and for extra low solution deliveries.


Ultrasonic Atomizer Solar Cell Coating Fuel Cell Coating


Introduction:


Ultrasonic nozzles are a type of spray nozzle that uses high frequency vibration produced by piezoelectric transducers acting upon the nozzle tip that will create capillary waves in a liquid film. Once the amplitude of the capillary waves reaches a critical height (due to the power level supplied by the generator), they become too tall to support themselves and tiny droplets fall off the tip of each wave resulting in atomization.


The primary factors influencing the initial droplet size produced are frequency of vibration, surface tension, and viscosity of the liquid. Frequencies are commonly in the range of 20–180 kHz, beyond the range of human hearing, where the highest frequencies produce the smallest drop size.

ultrasonic spray coating

Advantages of ultrasonic spraying equipment


    High uniformity: Ultrasonic spraying is a high-performance industrial-grade precision spraying technology, used for high-uniformity coating of sub-micron and nano-scale thin films.

    Material saving and environmental protection: Since the low-speed spray without pressure is easy to control, and the droplets fall on the substrate instead of rebounding from the substrate, it can ensure a significant reduction in the amount of overspray, save a lot of materials and reduce environmental emissions . The coating utilization rate of ultrasonic spraying is more than 4 times that of traditional two-fluid spraying.

    High controllability: When a very low flow rate is required, the nozzle is what you want. When spraying particles are suspended, they have a unique advantage. Through the ultrasonic effect of the nozzle itself, the particles are kept uniformly suspended during the entire spraying process to ensure that the functional particles are more uniformly dispersed in a thinner layer.

    High efficiency and energy saving: the liquid is transferred to the spray head through its own gravity or low-pressure pump to achieve continuous or intermittent atomization, no clogging, no wear, no noise, no pressure, no moving parts, no cooling water required during atomization, and low energy consumption , The equipment is simple, the failure rate is low, the ultrasonic nozzle has a self-cleaning function, and daily maintenance is free.

    Widely used: Ultrasonic spraying equipment is mainly used in fuel cells, thin film photovoltaic cells, thin film solar coatings, perovskite solar cells, solar cells, graphene coatings, silicon photovoltaic cells, glass coatings, electronic circuits and other industries. The nozzle can be applied to a variety of solutions, sewage, chemical liquids, and oily liquids can also be atomized.


Parameter:


Item Parameter
Frequency 40Khz
Power 10~100w
FLOW RATE (ml/min) 0~200ml/min
Spray width 10~50mm
Solution utilization above 98%


Application:

    • Electronics: Sensors, PCB Fluxing, Semiconductors etc.

    • Industrial: Glass, Touch Screen, etc.  

    • Medical: Stents, Balloon Catheters, Diagnostic Device etc.

    • Energy: Fuel Cell, Solar Cell, etc.

      ultrasonic spray nozzle


  


  Rps-sonic, consisted with a couple of young people who love ultrasonic very much.The founding members of RPS-SONIC have an average degree of Bachelor's degree or above. They have been in the ultrasonic industry for more than 5 years and have rich experience in ultrasound. The company's business philosophy is: Do not blindly promote any product, find the most suitable product for customers. So before each order, we will confirm all the details, including application details, capacity,equipment conditions, equipment specific information.Before year 2012, we only sale ultrasonic welding equipment , during these twenty year develop, we find, more and more people have problem with the core part of ultrasonic welding equipment -generator and transducer, so we decided to start our business of transducer and generator of our own transducer and generator. Many of the end user meet the transducer problem, they don’t know why transducer broken, and changing the expensive transducer one by one. Actually, one branson /dukane /rinco transducer can use 10~30 year, even the cheapest transducer can use about 5 years. So there must be some reasons if your transducer broken in one year. That’s why we want build Rps-sonic, we need to help more end user to know more about ultrasonic systems, to use ultrasonic equipment better, to save cost when meet problem.The same to ultrasonic equipments, Unreasonable operation may shorter the use-life. So we have to make technical inquiry before operate ultrasonic machine. The key point of ultrasonic machine is resonance, only keep every part in resonance can make the system in best work environment. Of course we can make the transducer/generator replace for Branson /dukane/ rinco/ herrman telsonic welding machine, we can also make transducer/generator for any application of your ultrasonic equipment. We supply OEM service for oversea customers, we already have two OEM customer in USA and German.The high power ultrasonic system with different horn(probe) can work in different area, that why you can see different ultrasonic application , such like: ultrasonic welding , ultrasonic sewing , ultrasonic cutting , ultrasonic slicing, ultrasonic homogenizing and ultrasonic coating.The core components of ultrasonic system are always the ultrasonic generator and the Probe. The design of the vibrator probe and the stability of the ultrasonic generator have always been the most important factors in the ultrasonic application process. All the RPS-SONIC ultrasoic system will be tested 24 hours before shipment. and all the horn(probe) will design by ANASYS and resonance simulation, to confirm the perfect design.If you have any problem in ultrasonic area, welcome contact Rps-sonic.
Similar Product Recommend