Membership
Help
Jinan Focor Machinery Co.,Ltd
Jinan Focor Machinery Co.,Ltd
| Brief Introduction |
Model: FK10-1BC
Power of Diesel engine: 60 KW
Power type: Diesel engine
Section (b×h): 2×2~3.5×3.5 m
Dimensions: 7800×990×2260 mm
| Product Introduction |
FK10-1BC underground jumbo drill is mainly used to drill blast holes for tunneling constructions in mining, metallurgy, water and electricity, railway, highway engineering, etc. This series use all hydraulic drive, with high efficiency and speed which can be 0.8-2 m/min. The advanced hydraulically controlled drilling system, which is safe and easy to operate, incorporates the auto-stop and anti-jamming function, auto-stop at end-point, auto-wash, working with diesel engine can improve the working environment a lot.
| Configuration And Technical Parameters |
Drilling Arm | Diesel engine: Cummins |
Drilling arm: DF00201/2.4m | Model: B3.3-C80/60KW |
Lifting hydraulic cylinder: DF631.10030 | Traveling mechanism |
Pitch hydraulic cylinder: DF631.8075 | Travel motor: Imported |
Rise and Fall: up55° down16° | Track group: Domestic |
Arm swing: inner14° outer47° | Air control system |
Compensative travel: 1500mm | Air pump ≥2000L/min 0.8MPa |
Reverse: positive180° negative180° | Blowing hole air pressure (out-source gas) 0.7Mpa |
Thruster Assembly | oil tank air pressure: 0.03Mpa |
Hydraulic drill: HYD200 | Drill lubrication air pressure: 0.4Mpa |
Thruster: DF00333 | Water control system |
Rock drill tools: R32-R32-3050 | Water pump ≥2000L/h ≤1.2MPa |
Pitching: down105° up15° | High-pressure ball valve (YJZQ): 21MPa |
Swing angle: inner45° outer45° | multi-way direction valve: Imported |
Total length: 4250mm | Handle valve for traveling: Imported |
Hole depth: 3100 mm | Pressure cartridge valve: Imported |
Max. Propulsion: 9000 N | Main filter: High pressure pipeline filter |
Impact oil pressure: 14~16 MPa | High pressure hose: Mine safety standard |
Impact flux: 30~45 L/min | Colder entrance water pressure: (≤) 0.6Mpa |
Torque: 60~260 N·m | Rock drill water pressure: (≥) 1.2Mpa |
Impact energy: 100~200 J | Hydraulic and pipe system |
Impact frequency: 34~67 Hz | Hydraulic pump: Triple vane pump |
Rotate speed: 200~400 r/min | Hydraulic oil heat exchanger: 50 pieces |
Impacting loop pressure: 16Mpa | Jumbo Body |
Drill pipe rotation loop pressure: 15Mpa | Overall size (l×w×h): 7800×990×2260 mm |
Compensation loop pressure: 10Mpa | Hole diameter: Φ32~Φ102 mm |
Boom loop pressure: 20Mpa | Drill pipe length: 3450 mm |
Propulsion loop pressure: 11Mpa | Hole depth: 3.1 m |
Leg extension loop pressure: 21Mpa | Drilling speed: 0.8~2 m/min |
Traveling loop pressure: 20Mpa | Section(b×h): 2×2~3.5×3.5 m |
Large arm swing cylinder | Grade ability: 14% |
pendulous device: DF00102 | Total weight: ≈6500 kg |

| Deliver, Shipping And Serving |

Related Videos:
| Product Qualification |

| Other Underground Mining Machines We Supply |

| Latest News - |
Although igneous rock is hard, because it is integrated, in addition, suppose small number of crevices and not weathered, it is relatively drilled, its advance is slow but few failures, generally, it can gain satisfied result, but relative fast damage of drill device will occurred.

3.4.10 Operate drill rod rotation valve, the drill rod rotates. (Counter-clockwise is for drilling operation and clockwise is for dismantle drill rod)
3.4.11 Operate rock drilling propulsion handle, drilling operation advances or retreats. Automatic bounce reset for fixing or retreat of positioning of the control valve during conducting propulsion drilling.
3.4.12 Push the handle of gradually drilling valve, first small percussion of rock drilling at low speed, after the drill rod bit enters into rock, propulsion increases, the impact valve automatically reverse direction.
3.4.13 When the drill rod bit fully enters into the rock and, determined no danger of inclination, pushes the handle of the gradually drilling vale to the end and conduct regular drilling operation.
3.4.14 When propulsion distance reach to the termination, the slide guide of the drill jumbo and percussion action will automatically stopped.
3.4.15 Pull the handle of gradually drilling valve to the original position.
3.4.16 Pull back the propulsion handle of rock drilling and let the jumbo truck retreat to the original position.
3.5 Drillability and boreability of rock
3.5.1 Drillability and boreability of rock
Drillability or rock means the drill rod relaying on rotation torque and propulsion pressure, the penetration speed the drill hole gains in the rock. boreability means the penetration speed gained by using rotation-percussion type rock drill plus propulsion pressure to penetrate blast hole. Rotation type rock drill is adopted for viscosity and toughness rocks and, rotation-percussion type drilling machine is adopted for fragile.