Welcome Customer !

Membership

XwbooInstrumentationFlow MeterThrottling DeviceV cone flowmeter
  • $item.Title
  • $item.Title

V cone flowmeter

Kaifeng Henghe Flow Meter Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Throttling Device
Place of Origin
HeNan, KaiFeng

Kaifeng Henghe Flow Meter Co., Ltd.

Contact

Manager Bian

Phone

13523785668

Fax

86-371-25616199
Productname:v-coneflowmeterModel:LGV    Productintroduction:Thecharacteristicsoftraditionaldifferentialpressuremetersarebasedonidealflowconditions;infact,suchconditionsdonotexistinrealapplications.Anychangesinpipinglayout,suchaselbows,valves,reduceddiameters,enlargeddiameters,pumps,teejoints,etc.,willdestroythefullydevelopedflow.Itisdifficultforgeneralflowmeterstoobtaincorrectmeasurementvalues​​inturbulentflow.TheV-coneflowmeterovercomestheseshortcomings.Underextremelyharshinstallationconditions,iftherearetwoupstre......

  Product name: v-cone flowmeter

    Model: LGV

    Product introduction: The characteristics of traditional differential pressure meters are based on ideal flow conditions; in fact, such conditions do not exist in real applications. Any changes in piping layout, such as elbows, valves, reduced diameters, enlarged diameters, pumps, tee joints, etc., will destroy the fully developed flow. It is difficult for general flow meters to obtain correct measurement values ​​in turbulent flow. The V-cone flowmeter overcomes these shortcomings. Under extremely harsh installation conditions, if there are two upstream elbows that are not on the same plane and are very close to the cone, the V-shaped cone can also make the speed distribution flat and symmetric, thus ensuring the measurement accuracy. Because the orifice edge of the V-cone flowmeter is obtuse, the flow

    Detailed introduction:

    Main technical parameters 1. Accuracy grade: 0.5, 1.0

    2, working pressure: ≤16MPa

    3, working temperature: -30-450℃

    4. Ambient temperature: -30-70℃

    5. Pipe inner diameter: 15-3000mm

    6, output signal: 4-20mA

    7, power supply voltage: 24V DC

    8. Applicable medium: suitable for gas and liquid medium.

    Notes Installation

    ▲It can be installed horizontally, vertically or obliquely, and the pipe should be filled with liquid.

    ▲The straight pipe section before and after the throttling device should be straight, without visible bending, and at the same time should be "round", the inner wall should be clean, without pits and sediment.

    ▲The pressure piping installation should comply with the specifications stipulated by the standard.

  download Google

    Please provide the following data in detail when ordering:

    (1) Measured medium

    (2) Large, common, small flow.

    (3) Working pressure, working temperature

    (4) Medium density and viscosity

    (5) Pipe material, inner diameter, outer diameter

    (6) Allowable pressure loss

    (7) Pressure taking method

    (8) On-site pipeline installation situation and the form of local resistance parts.

    Product classification and structure According to the scope of product supply and the output signal, the V-cone flowmeter can be divided into 3 categories:

    1. The V-cone flow sensor only provides the forming part of the differential pressure signal (throttle parts and pipes), and does not provide the differential pressure transmitter and flow display part, and the output signal is differential pressure. It is up to the user to make other configurations.

    2, V-cone flow transmitter

     consists of a V-cone flow sensor and a differential pressure transmitter. There are two structures, split installation and integrated installation.

    The split V-cone flow transmitter is composed of an independent V-cone flow sensor and a differential pressure transmitter. The pressure pipe connection between the V-cone flow sensor and the differential pressure transmitter is completed by the user.

    Integrated installation means that the differential pressure transmitter and the V-cone flow sensor have been connected into one when the product leaves the factory. After the user purchases the integrated V-cone flow transmitter, there is no need to connect the pressure pipe when using it. However, the corresponding flow totalizer, pressure transmitter and temperature transmitter must be connected.

    3, V-cone flowmeter

    There are two structures of split installation and integrated installation:

     Split installation is composed of independent V-cone, differential pressure, pressure, temperature transmitter, flow calculator, stop valve and other parts. The connection combination between the various parts is completed by the user himself. There are two kinds of explosion-proof type and ordinary type

  Kaifeng Henghe Flow Meter Co., Ltd. is an emerging enterprise specializing in industrial process automation control and the research, development, production and service of intelligent meters. The company is located in Kaifeng, an ancient capital of the Eight Dynasties. Kaifeng Instrument Industry was founded in 1958. The National Water Flow Metering Station and the Flow Meter Product Quality Inspection Center of the Ministry of Machinery Industry are located here. There are a large number of senior flow meter production and R&D engineering and technical personnel. The company has strong technical force and has passed ISO90001 quality system certification, ISO14001 environmental management system certification, ISO45001 occupational health and safety management system certification, and various flowmeter production licenses. The main products are: electromagnetic flowmeter series (high pressure type, submersible type, sanitary type, plug-in type, etc.), vortex flowmeter series, turbine, differential pressure flowmeter series (standard orifice, standard nozzle, V cone, wedge, etc.) Annular orifice plate, balance orifice plate, venturi tube) and large, medium and small liquid flow calibration device. The company has built four sets of water flow standard devices DN15-DN50, DN65-DN300, DN350-DN700, and DN800-DN2000. The accuracy of the standard meters on the devices are all 0.2 level. The company’s product specifications are complete and can meet liquid, gas, steam, etc. For flow measurement of multiple media, each flowmeter is qualified for the actual flow calibration before leaving the factory. The factory has an automatic control system engineering department, which undertakes complete sets of automatic control projects. Products are widely used in nuclear power, chemical, electric power, petroleum, petrochemical, coal, sewage treatment, animal husbandry, urban water supply, agricultural irrigation, heating, metallurgical coking, machinery, papermaking, medicine, food processing and other industries. And exported to most countries. Based on the tenet of "Today's Quality, Tomorrow's Market", we attach importance to product quality and provide users with high-quality commissioning guidance, technical training, product maintenance, re-schooling and spare parts supply in a timely manner. Kaifeng Yokogawa Instruments is willing to make progress hand in hand with the majority of users in flow meters to create brilliance together.
Similar Product Recommend