Welcome Customer !

Membership

XwbooGeneral Machinery Valve Other ValvesVA-7010 Electric Two-way Valve
  • $item.Title
  • $item.Title

VA-7010 Electric Two-way Valve

SHANGHAI BAIGANG VALVE GROUP CO., LTD

Model
Nature of the Manufacturer
Manufacturer
Product Category
Other Valves
Place of Origin
ShangHai, ShangHai
VA-7010 Electric Two-way ValveProduct overviewProduct model: VA-7010Nominal diameter: DN15~25mmNominal pressure: 1.6MPaAmbient temperature: 0℃-60℃Applicable medium: cold water, hot waterMedium temperature: 2℃-95℃

VA-7010 Electric Two-way Valve Overview
VA-7010 Electric Two-way Valve produced and sold by Baigang valve group for fan coil water on-off control. Body forged brass, the drive using hysteresis synchronous motor as the driving force. Power open the valve, reset by the spring after the power is off (that is, the body off after power off), and with a manual valve operating mechanism is the central air conditioning system is one of the most widely used electric valve.


VA-7010 Electric Two-way Valve technical indicators
◆ Drive motor: hysteresis synchronous motor 
◆ Drive voltage: 220VAC, 50Hz / 60Hz (with AC24V, 110V to choose from) 
◆ Power consumption: ≤ 7.5VA 
◆ Body pressure: 1.6MPa 
◆ Allow Pressure difference: ≤0.13MPa 
◆ Suitable medium: cold water, hot water 
◆ Applicable medium temperature: 2 ℃ -95 ℃ 
◆ Applicable ambient temperature: 0 ℃ -60 ℃ 
◆ Opening and closing time: about 10 seconds, about 5 seconds off 
◆ Valve Body connection: ZG pipe thread (can also be customized according to user needs) 
◆ travel (theoretical): 4.0mm


VA-7010 Electric Two-way Valve The main material
◆ Body: brass (forging) 
◆ Stem: 304 stainless steel 
◆ Sealing material: special rubber 
◆ Drive Chassis: Die Cast Aluminum 
◆ Drive Cover: Flame Retardant ABS Engineering Plastics


VA-7010 Electric Two-way Valve installation and commissioning
◆ Before installation must read the instructions, cut off the power and must be installed by professionals. 
◆ The flow direction must be the same as the direction of the arrow on the valve body. 
◆ The valve body must be above the fan water tray to ensure that dripping water will fall into the water receiving tray. 
◆ The valve body and driver must be installed within ± 60 ° in the vertical direction. At least 30mm above the space should be used for disassembly and assembly. The surrounding piping, equipment and buildings must maintain sufficient space for maintenance and repair, and must be installed in the maintenance personnel Through the access hole can reach places. 
◆ two and more than two electric valve can not be parallel, if you really need to use relays parallel isolation. 
◆ After installing the valve body and passing the pressure test to the pipeline, install the drive. 
◆ If the driver has been installed on the valve body, the driver must not be used during installation and commissioning as this may damage the driver. 
◆ The drive can not be wrapped with insulation material, otherwise it will affect its heat dissipation. 
◆ The driver must be reliably grounded through a wire of not less than 1.5mm2. The other wires should comply with the relevant standards of the electrician. 
◆ Installation is complete and check the correct, water-free power debugging. At least observe the three full drive cycles and make sure all components are correct and correct. 
◆ after passing through the anhydrous test, and then through the water debugging. System pressure on the water must be strictly controlled within 0.13MPa, in order to ensure the effectiveness of the electric valve on the water flow switch.


VA-7010 Electric Two-way Valve model comparison table

namemodelCaliber parametersABCThe maximum allowable pressurekv
Electric two-way valve ZLVA-7010-2151/2 "DN1555171030.13 MPa2.0
ZLVA-7010-2203/4 "DN2063171030.13 MPa2.5
ZLVA-7010-2251"DN25712251070.08 MPa3.8
Electric three-way valve ZLVA-7010-3151/2 "DN1555291030.13 MPa2.0
ZLVA-7010-3203/4 "DN2063291030.13 MPa2.5
ZLVA-7010-3251"DN2571381070.08 Mpa3.8


  Shanghai Baigang Valve Group Co, Ltd. The original Shanghai Baigang Valve Machinery Factory was founded in 1998, is a valve manufacturer with more than 20 years of high-end valvetechnology in Shanghai, after years of construction and accumulation of development, restructuring Rongsheng Group Co, Ltd. Group registered capital of 61 .88 millin yuan, the groupheadquarters is located in Shanghai Jinshan District, Shanghai valve brand, one of China's valve brands, is a collection of scientific research, casting/forging, production, sales and service in oneof the modern professional valve manufacturing enterprises.Shanghai Baigang Valve Group Co., Ltd.(abbreviation: Baigang Valve Group)Main business valve brands: Baigang brand BAIGANG, SHBG, BGVG, currently the group has five subsidiary valve andactuator brands, under the control of more than 10 professional companies and more than 30 strategic agreement partner companies, forming a dedicated professional product supplychain;Group headquarters factory is located in industrial park, the main production and industrial automation control valve valve, etc, in order to develop the best steel group, realize powerstel brand valves intelligent manufacturing towards the world, owns autonomous system, strict control of product quality management system and the three major production bases located inzhejiang corrosion resistant material and metal steel valve base, the base for tianjin rubber valve, hydraulic valve in fujian province, to scientific research and technology innovation as the core,the manufacturing system of quality control system as the center.The company adhere to the quality first, honesty, open up the market as the business philosophy to create a strong Baigangvalve group and national brand;Baigang high quality valves, automatic control equipment and accessories, mechanical equipment and other products are mainly used in chemical industry,natural gas, petroleum, power station, metallurgy, water conservancy engineering, environmental protection, water treatment, pharmaceutical and other fields.Since its establishment, the company has been adhering to the people-oriented, harmonious and win-win management philosophy, advocating humanized management, creating a good spacefor the development of all kinds of talent, talent is the foundation of the development of the company.The company and the major production bases have all kinds of mechanical processingequipment and perfect physical and chemical testing and performance testing equipment as well as rigorous management mode, to ensure that we can eficiently produce high-quality high-endvalves and automation control equipment and mechanical equipment products.
Similar Product Recommend