Welcome Customer !

Membership

XwbooPlastic MachineryInstruments For Rubber & PlasticsPlastic Testing MachineVacuum Inlaying Machine / Cooling Mounting Press Machine
  • $item.Title
  • $item.Title

Vacuum Inlaying Machine / Cooling Mounting Press Machine

EBPu Electromechanical Equipment (Zhejiang) Co., Ltd.

Model
Nature of the Manufacturer
Other
Product Category
Plastic Testing Machine
Place of Origin
,
Cold mounting by pressure, maximum pressure -0.1Mpa Each time can inlaying over 10 pieces of samples

Product introduction:

MP-3000V can exclude the air contained in the sample. Without the presence of air, the embedded compound would fill the sample's gap, eliminating the gap between the sample and the compound. Therefore, edge retention is strengthened and fragile samples are well supported during grinding and polishing.

A sturdy vacuum pump provides enough vacuum to quickly remove any air in a porous sample. With the unique rotating cup holder in the vacuum container, multiple samples can be soaked in vacuum at the same time.

A unique casting mechanism is designed so that the embedded compound can be placed in the cavity and poured into the mold at one time. Can be applied to various epoxy resin and polyester castable inlay (cold) compounds. Since the sample is encapsulated in a vacuum, the possibility of air entering is completely eliminated.

 

Easy to use:

Place the sample mold in a vacuum container

After the inlaid compound is mixed, put the stirring cup into the cup holder to put the vacuum container on the base

Pour the inlaid compound into the mold, pour and hold for one minute, then turn to atmospheric pressure

Repeat this cycle several times to open the cavity and allow it to solidify normally.

 

Technical specification:

Item

Specification

Remark

Mould size

φ30mm silicon mould

Optional 40, 50mm

Vacuum pump

Max vacuum degree: -0.1Mpa

Pumping rate: 7.2 m³/h


Input voltage and power

Single phase 220V, 50/60Hz  370w


Dimension

Vacuum container: 300 x 300 x 300 mm 

Vacuum pump: 340 x 130 x 270 mm

(L x W x H)


Maximum Quantity of samples

> 10 pieces

φ30mm

Weight

Vacuum container: 1.15kg

Vacuum pump: 11.5kg


 

Standard accessories:

Item

Quantity

Item

Quantity

Vacuum pump(with vacuum meter)

1

100ml measuring glass

1

Vacuum container

1

CM4 cold mounting resin

Resin 200ML + curing agent60ml

1

Connecting pipe

1

Manual

1

Mould (φ30mm silicon mould)

3

certificate

1

Located in the beautiful coastal city of Wenling, Zhejiang, EBPu Electromechanical Equipment (Zhejiang) Co., Ltd. is a key private enterprise in Wenling's high technology industries. we are committed to becoming the most satisfied supplier to our partners & clients! EBP's mission is provide one-stop testing solutions to customers and make test more easier! We providing our users with innovative & robust full lab-solutions, reliable service, support & access to the knowledge that comes from our team serving the industry for 10+ years.The team is composed of a group of engineers with more than ten years of research, development, promotion and sales experience in the field of material testing. The backbone of the team, Mr. Zhou, has rich experience in overseas promotion and sales, and took the lead in setting up the company’s international promotion and sales team. With professional language skills, solid product skills and international promotion capabilities, we can provide much better service to our overseas markets. After years of continuous accumulation and precipitation, the company’s products have been sold in more than 50 countries and regions, and are widely trusted and loved by users. This is the pride of our EBP people. We will work harder and down-to-earth with better products and Service to give back to our customers!
Similar Product Recommend